List Your Overclocks


Recommended Posts

Intel Pentium 4 630 - 3.0Ghz - 800FSB - 2Mb Cache

Maximum: 3.0Ghz to 4.0Ghz @ 55C - Stock Heatsink and Fan!

Standard: 3.0Ghz to 3.75Ghz @ 35C - Zalman CNP9500 Heatsink and Fan - nice

Link to comment
Share on other sites

AMD Athlon64 3700+ San Diego (2.2 GHz stock) @ 2794 MHz (11x254). Close enough to 2.8 for me. At 255 it's not prime95 stable :p That's on a Tower112 heatpipe cooler with dual 80mm's. Idle temp is usually around 88-90F, full load around 115F. I need water...

Full stats in sig.

Peace,

Pete Zaria.

Link to comment
Share on other sites

  • 2 weeks later...

Well, confirmed my X2 3800 is indeed a Toledo core an not the Manchester core. JB-E6, revision.

But sad to say, I can only easily get it stable at 2.6ghz. Going higher will take a lot more effort it seems, unless I get better DDR. then again, could it be my PSU?

Link to comment
Share on other sites

I need a better PSU because it's crash randomly actually, but I expect to make it work after a new PSU and VGA cooler

Video Card: Sapphire Radeon x800GTO STD Edition

PCI-E 256MB

Core: 400/490 (980) Memory

post-146651-1135363799.gif

OCed to 600/600(1200)

Lunamsn.bmp

PS: My PSU is a little 300W >.<

For the CPU it's the same thing...

I can't get over 2000MHz because it don't boot lack of juice... :(

But I can boot in at 250MHz FSB but with a 4x multiplier

So now I need a good PSU and coolers :D

Link to comment
Share on other sites

I need a better PSU because it's crash randomly actually, but I expect to make it work after a new PSU and VGA cooler

Video Card: Sapphire Radeon x800GTO STD Edition

PCI-E 256MB

Core: 400/490 (980) Memory

post-146651-1135363799.gif

OCed to 600/600(1200)

Lunamsn.bmp

PS: My PSU is a little 300W >.<

For the CPU it's the same thing...

I can't get over 2000MHz because it don't boot lack of juice... :(

But I can boot in at 250MHz FSB but with a 4x multiplier

So now I need a good PSU and coolers :D

586765050[/snapback]

STD edition? bahahah

Link to comment
Share on other sites

ATI Radeon 9600se

default: 325/400 mhz

stable at: 425/450 mhz

maximum: 450/500 mhz

And that's using the stock fan, and without any information about the temperature.

Link to comment
Share on other sites

STD edition? bahahah

586786025[/snapback]

What you have to laugh like this?

First, I have allready spend 50$ CAD over the initial buget to get a GTO over a GT...

Second, the FireBlade was not avalible, and the GTO? was BackOrder...

Anyway, i'm happy like this...

Link to comment
Share on other sites

What you have to laugh like this?

First, I have allready spend 50$ CAD over the initial buget to get a GTO over a GT...

Second, the FireBlade was not avalible, and the GTO? was BackOrder...

Anyway, i'm happy like this...

586799126[/snapback]

I am pretty sure he was laughing over the name STD Edition, not the card itself lol...:rofl::

Link to comment
Share on other sites

I am pretty sure he was laughing over the name STD Edition, not the card itself lol... :rofl:

586799160[/snapback]

Well... it's because if I said just Sapphire x800GTO there 4 edition of it...

The Normal or Standard, Ultimate, Fireblade and ? ...

Link to comment
Share on other sites

  • 2 weeks later...

NVIDIA 7800GTX

Before:

Core: 430MHz

Memory: 1.20 GHz

Fan/Heatsink: Stock

Temps: 41 Idle / 60 Load

3DMark 05: 7590

After:

Core: 500MHz

Memory: 1.34 GHz

Fan/Heatsink: Zalman VF700

Temps: 27 Idle / 43 Load

3DMark 05: 8438

All that at stock voltages! w00t! :woot:

Link to comment
Share on other sites

AMD 64 Venice 3200 2.0 GHz @ 2.5 GHz

586564127[/snapback]

Ditto.

If I turn the Voltage up a little, it runs stable at 2.8. My memory is a issue though, so above 2.6 is not to wise without good memory.

Link to comment
Share on other sites

Asus A8N-SLi Premium mobo

A64 X2 4400+ running at 2.66GHz (253x10.5)

2GB of OCZ Platinum PC3200 RAM currently running at 400MHz (hence the odd 253x10.5) because I haven't had time to try and max that out yet.

I'm using a Thermalright XP120 with a Vantec Stealth 120mm fan. Hits about 55 degrees C with both cores under full load (24 hours of Prime 95) which I can live with. After a few hours of gaming, so one core under load, it's around 40 degrees C. Idle temperatures are around 30 degrees C.

Also have a 7800 GTX which is just moderately overclocked on stock cooling - running at 490MHz core and 1300MHz RAM. A moderate overclock but I'm happy with its performance.

I'll live with that until I get the time to try and play with it some more which probably won't be any time soon :)

Link to comment
Share on other sites

I'm a complete noob at overclocking, so I'm being extremely careful not to blow anything up :p

AMD64 X2 4400+ 2.2GHz @ 2.4GHz

2GB of DDR400 @ DDR433

(see sig for additional information on my specs)

Link to comment
Share on other sites

CPU AMD 64 3200+ @ 2420 MHz (original 2200MHz)

9600 V360 ATI @ 450/450 (original 400/400)

  Approximately 10% overclock speed for each

586849114[/snapback]

The 3200+ stock is 2.0 not 2.2. You can up it to 2.5 on the stock voltage without any probs (on the default AMD cooler). ;)

Link to comment
Share on other sites

Tbred 2100+ @ 2.3Ghz 11.5x200, 2.0v (stock = 1.7Ghz) 35% increase :) time for an upgrade tho, hope X2 3800+ gives me nice overclock like this gem of a thoroughbred did

Edited by Splint
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.