Slow File Transfer


Recommended Posts

Hi People,

 

Transferring files from USB to Computer or other way round is slow, it starts of high speed (MB/s) but decreases and takes ages to complete.

 

PC Specs are:

8.00 GB Ram

i5-4670 CPU @3.40 GHz

Windows 8.1 Pro 64-bit

 

Any ideas to why this is happening and any resolutions?

 

 

Thanks!

Link to comment
Share on other sites

What is slow to you - can we have an actual test?

I would grab nirsoft usbview and look at details of your disk and then simple robocopy, crystaldiskmark couldn't hurt either.. Just be careful on which one you download the exe comes with opencandy.. I would normally just not even suggest such software. But if you grab the portable zip its good.

nirsoft http://www.nirsoft.net/utils/usb_devices_view.html

crystal http://sourceforge.jp/projects/crystaldiskmark/downloads/46482/CrystalDiskMark3_0_3b.zip/?use_mirror=jaist

post-14624-0-00344500-1407066970.png

post-14624-0-27746500-1407067006.png

Here is the most realistic test, just simple robocopy of large file.. What do you get?

post-14624-0-43785300-1407067010.png

Link to comment
Share on other sites

Slow compared to what?  USB (v2) has always been slow.

 

Testing, as noted above, will show you the actual throughput.  But how are you determining that it's "slow"?

Link to comment
Share on other sites

What flash drive are you using, and what kind of files are you transferring - bunch of small files or large files? Are you using a USB 2 or 3 port? 

 

Try a robocopy like Bud says. Here's what I consider speedy:

post-182178-0-78389300-1407207617.png

 

One of the fastest flash drives I have owned! 

Link to comment
Share on other sites

tsupersonic -

Until this new Corsair Voyager GTX came out - the Sandisk Extremes were among the fastest there are - I had a 32GB, which I gave to my father, then bought a 64GB - lightning fast!

I am going to get the 120GB Corsair for my b-day gift to myself - SSD on a stick

Link to comment
Share on other sites

tsupersonic -

Until this new Corsair Voyager GTX came out - the Sandisk Extremes were among the fastest there are - I had a 32GB, which I gave to my father, then bought a 64GB - lightning fast!

I am going to get the 120GB Corsair for my b-day gift to myself - SSD on a stick

I have seen that drive, and it sounds good. I got my Extreme 64 GB for a decent price, so I'll stick with it for now. I don't use flash drives as much as I used to.

 

I'm glad that flash drives are finally getting performance boosts. It'd be nice to have higher capacities at somewhat affordable prices.

Link to comment
Share on other sites

^ dammmm 150MBps write that is speedy I agree ;) What is the read on that?

120-130

Read speeds of 180 are not uncommon at all.  The only thing that bugs me about the 64GB Extreme is the fact Sandisk changed the firmware to make it windows 8 on a stick compatible & now the flash drive shows as a hard drive as opposed to removable disk - so the utiulities I use to make the USB bootable dont see any flash drive.

I am getting the Corsair  Voyager GTX 128GB in 2 weeks.

post-508501-0-44695700-1407243824.jpg

ON TOPIC:  The OP still hasnt even mentioned if it is USB2 or 3 and what type of media is he transferring to ?

 

Link to comment
Share on other sites

Yeah not much we can do until the OP comes back with some info as requested by multiple people, etc.

Link to comment
Share on other sites

both screens show the command use to do the test ;) So what do you not understand?

robocopy <source disk\path> <dest disk\path> filename.ext

your usb from your post is only 2, so max your going to see is if I recall about 35Mbps MAX!!! More likely much less than that, from here

http://www.tomshardware.com/charts/usb-thumb-drive-charts/Copy-Benchmark-Images-Read,Marque_fbrandx166,2302.html

Looks like read from usb2 kingston is less than 30 for sure, and more like less than 20.

I did a write test, but after reread of your OP you want read test so your robocopy would be more like

robocopy j: <dest\path> filename

I show from your shot that your usb is j drive. So like

robocopy j: c:\temp filename.ext

should copy the file from your usb disk to your c:\temp directory.

Link to comment
Share on other sites

Robocopy Results:

 

robocopy_test.jpg


Looks pretty good.

 

Are you transferring large files or a lot of little files.

 

Generally lots of little files (pictures mostly).

Link to comment
Share on other sites

Robocopy Results:

 

robocopy_test.jpg

 

Generally lots of little files (pictures mostly).

 

In my experience write speeds on USB 2.0 suck balls when you are doing lots of little files. They do best with one large file.

Link to comment
Share on other sites

In my experience write speeds on USB 2.0 suck balls when you are doing lots of little files. They do best with one large file.

 

When the actual file transfer starts the speed is fine, after 10-15 seconds the speed decrease to less than ~1 MB/s then I pause the transfer once it's paused I make it resume and the speed increases.

Link to comment
Share on other sites

When the actual file transfer starts the speed is fine, after 10-15 seconds the speed decrease to less than ~1 MB/s then I pause the transfer once it's paused I make it resume and the speed increases.

 

That's normal, cache is caught up and it's actually writing the files to the disk (flushing)

Link to comment
Share on other sites

Sorry OP - but that is typical for USB2 & crappy flash drives.

Even if you went and bought a Corsair Voyager GTR (that giant black and yellow one that was among the fastest of USB2 drives) - you would only see about 33MB/sec reads and 20-25MB/sec writes.

 

Link to comment
Share on other sites

I get about 35MB/s also for my USB 2.0 HDD so that's a normal speed. USB 2.0 Flash drives are even worse in some cases.

 

USB 3.0 now bumps that speed up a bit so you should be looking there maybe.

Link to comment
Share on other sites

This topic is now closed to further replies.