conna Posted September 23, 2014 Share Posted September 23, 2014 My hardware will be: MSI X99S Motherboard i7-5930K Haswell-E 6-Core 3.5GHz LGA 2011-v3 140W Desktop Processor BX80648I75930K Most likely a Full tower ATX case. Are the LGA 2011 heatsinks compatible with LGA 2011-v3? What is a good Heatsink/fan for the Haswell-E? I do not plan to overclock 95% of the time. If anybody Is running the X99S, tell me what you are running and if you are happy with the results. I am not against water cooling if there is a setup that is Guaranteed to never leak and the water pump will not go out. Thank you for helping a haswell noob out. Link to comment Share on other sites More sharing options...
Mindovermaster Moderator Posted September 23, 2014 Moderator Share Posted September 23, 2014 I think that the 2011 and 2011-v3 should have the same connector. I and several others liked the Corsair water cooler designs. I have the Corsair H80i, if you have a big case, get the H100i. (double sized reservoir) It's all closed circuit, so water leakage is none to very minimal. I don't know of anyone that had problems with these. conna 1 Share Link to comment Share on other sites More sharing options...
Jeston Veteran Posted September 24, 2014 Veteran Share Posted September 24, 2014 Yes, the connector for the 2011 and 2011-3 are the same. I have the Noctua NH-D15 for my 5930k which keeps it nice and cool, but it might be overkill if you aren't over clocking. conna 1 Share Link to comment Share on other sites More sharing options...
conna Posted September 24, 2014 Author Share Posted September 24, 2014 Thank you for the 2011 advice and the recommendations. I have used the Corsair H80 in computers I have built for people but It freaks me out having water that close to all the good stuff. In my second life I build water displays and water art and have seen water leak from the smallest spots and cause huge problems. The Noctua NH-D15 looks like a good choice. I assume the rest of their products are good? Link to comment Share on other sites More sharing options...
Xahid Posted September 24, 2014 Share Posted September 24, 2014 if you're not planning for overclocking, then what's the point of using 3rd party cooling solution? it's waste of money (imo) but if you still prefer 3rd party cooling solution, then water cooling is the best choice. http://www.coolermaster.com/cooling/cpu-liquid-cooler/seidon-240m/ compl3x 1 Share Link to comment Share on other sites More sharing options...
compl3x Posted September 24, 2014 Share Posted September 24, 2014 if you're not planning for overclocking, then what's the point of using 3rd party cooling solution? it's waste of money (imo) but if you still prefer 3rd party cooling solution, then water cooling is the best choice. http://www.coolermaster.com/cooling/cpu-liquid-cooler/seidon-240m/ I agree. The stock fan should be fine, you only need to concern yourself with after-market coolers if you plan on overclocking. Water cooling is great for the enthusiast community; some of the setups people make are freakin' awesome, but I don't really know of any "normal" users who needs it if you have good ventilation/cable management inside the case. Link to comment Share on other sites More sharing options...
Jeston Veteran Posted September 24, 2014 Veteran Share Posted September 24, 2014 Actually guys, there is no stock cooler included with these processors. And yes conna, Noctua's coolers are very good. Link to comment Share on other sites More sharing options...
Lenny Bruce Posted September 24, 2014 Share Posted September 24, 2014 I would say a Corsair H60, but I don't know if that is explicitly used when overclocking your processor. Link to comment Share on other sites More sharing options...
Noir Angel Posted September 24, 2014 Share Posted September 24, 2014 Closed loop water coolers are perfectly safe and durable as long as you mount them correctly. Though if you don't plan to overclock it any LGA 2011 air cooler should do the trick. Link to comment Share on other sites More sharing options...
compl3x Posted September 24, 2014 Share Posted September 24, 2014 Actually guys, there is no stock cooler included with these processors. You're correct. I should have googled that. I'd still say that you don't need to go loco buying a super-expensive heatsink/fan if there is no overclocking planned. Link to comment Share on other sites More sharing options...
+therealDamien Subscriber¹ Posted September 24, 2014 Subscriber¹ Share Posted September 24, 2014 na over kill would be using a phase change to cool cpu on stock. Link to comment Share on other sites More sharing options...
Mindovermaster Moderator Posted September 24, 2014 Moderator Share Posted September 24, 2014 I always go with Arctic Cooling. They are cheapo, but they cool well. I used the Freezer 7. It used to keep my i3 2140 at 25C. Link to comment Share on other sites More sharing options...
Odom Member Posted September 25, 2014 Member Share Posted September 25, 2014 +1 for Noctua coolers. You don't need to be overclocking to use them. I don't like the standard coolers as they are usually too inefective and noisy, so I always go to Noctua. It is way more silent and keeps the CPU quite a bit cooler. Link to comment Share on other sites More sharing options...
Chris123NT Posted September 25, 2014 Share Posted September 25, 2014 I would personally go with the Corsair H105, it's a nice cooler and cools better than the noctua's from what I've seen in testing various configs. My personal rig is custom water cooled but that's because it's a 5960x with a pretty decent OC on it and those 8 cores are a little more difficult to keep cool. Link to comment Share on other sites More sharing options...
conna Posted October 17, 2014 Author Share Posted October 17, 2014 I went with the 105. Seems to keep things cool. The pump was making a clicking sound that went away after I shut everything down and rebooted. I hope that it's not going bad. Only benn doing a burn in for a few days... I already am looking at RMA'n the motherboard because of a faulty SATA controller. I went with the 105. Seems to keep things cool. The pump was making a clicking sound that went away after I shut everything down and rebooted. I hope that it's not going bad. Only benn doing a burn in for a few days... I already am looking at RMA'n the motherboard because of a faulty SATA controller. Link to comment Share on other sites More sharing options...
Recommended Posts