neowin.net

Boy was this a pain in the neck to figure out... and the solution isn't 100% pretty,
but it sure works well! I've come to the conclusion that the MX900's BT hub is not
that great... and D-Link's DBT-120 USB hub is wonderful! The 3.x WIDCOMM drivers
just don't like the Apple Wireless Keyboard in that it won't pair correctly since
the pairing key is never displayed (as mentioned by previous poster). Funny enough
the 1.x WIDCOMM drivers do infact work.... BUT the Apple Wireless keyboard
fails to connect at login time leaving you without a way to enter a password in
during login if you use the MX900 + WIDCOMM solution. SO in the end here is what
I used :

NO WIDCOMM drivers. I installed Logitech's Setpoint 2.2, but then unistalled WIDCOMM.
Use the DBT-120. That little sucker rocks!
Use Microsoft's Bluetooth stack... ugly windows but works great!
Only plug the MX900 base into the AC adapter and not into the computer...
(this disables the MX900's BT hub, but allows it to recharge the mouse batteries).

The MX900 mouse + Apple's Wireless Keyboard works 100% now.
If you have any questions please feel free to ask!!!

I've got an old Epox dongle that's spare since I upgraded my mac's dongle to a DBT-120 (for headset support).

Out of curiosity, I plugged it in.

Windows picked it up and installed its own drivers, and it's ready to go. I disable BT on my mac and turn the keyboard off, then go to add device on the PC. Turn the keyboard on, click search, click add, type in a pairing code, hit next, type in in on the keyboard. Bang, one working apple bluetooth keyboard.

Just to make sure, I rebooted. About 5 seconds after i'm presented the desktop, the keyboard's working.

Typing this with it now

Thank God I found this post.
I was close to my harakiri.

I'm having exactly the same problem (the PIN that doesn't show up to be typed).
I'm using in my notebook (Acer Aspire 2012WLMi) an internal BT module from Actiontec (BTM-200). My OS is WinXP SP2. The installed driver is HP 3.0.1.905 (great, except by this little mess); the driver supports HID (human interface device).
I already tried 3.0.1.914 and 4.0.1.2101, both patched (that license file issue)

Keyboard is OK, since I've tested:
1. in several Macs. Flawless. Mac OS generates a PIN (yes, this one is showed on screen) and you just type in the KB.
2. in a desktop PC, with the Microsoft built-in driver (SP2). Same thing as Mac: you choose a PIN, type in KB and everything is working.
3. in a desktop PC, with some other driver versions from Widcomm. Sometimes, driver don't find the KB. Sometimes, finds and allows choosing a PIN (but after typing, you get an error).

In cases [2] e [3] I've tested in a desktop PC with a Olympia Bluetooth dongle (CSR-like). I'm trying to update my Actiontec internal module to use Microsoft's built-in (and very limited) driver, but I can't even choose it from the "Update driver" list. I uninstalled the most recent driver version, but the "Generic Bluetooth Radio" doesn't show up.

Any help would be really appreciated. Thanks in advance.

An update:
I installed the 1.4.2.10 and 1.3.2.7 versions, but none of them at least make the Bluetooth tray to appear at the tray.
I don't know any more what to do.

Hello.

I bought an Apple Wireless Keybaord and a D-Link DBT-120 USB bluetooth dongle to try to use the keyboard with Windows XP. I installed the drivers that came with the

The keyboard is not being recognized.

Can anyone guide me through the proper steps to get the keyboard working?

Thanks,
Avi

Actually, I tried the procedure quoted below, and the Bluetooth Device Manager finds the keyboard, and I get the Add Bluetooth Device Wizard "Windows is Installing Your Device." Then I click finish. But the keyboard doesn't work, and when I close and reopen the Bluetooth Devices control panels, the keyboard does not show up.

Any thoughts??

Thanks,
Avi

Ah-ha, I got it working.

For some reason I needed to let Windows choose the passkey. I had been either trying to use my own, or opting not to use a passkey. I'm not sure why this would be, but it's working now, and works fine after a restart too.
Avi

Could someone please comment as to whether the "caps lock" led works when using with a PC? (I read somewhere that the Apple Bluetooth does have an onboard caps lock LED...can't say, I've not seen one but I want to buy one because of the small footprint).

Any other comments, specifically....

the keyboard feel
what sucks? (eg I've seen some comments that the keys are too close together etc)
are drops frequent?

Also is the general consensu to go with the D-Link bluetooth adapter?

Many thanks in anticipation.

Hank McSpank
[Yank it, crank it & then rip the knob off]

Im using bluetooth with XP but seem to be having trouble with the Apple BT wireless keyboard pairing.
Im using the D-Link 120 dongle.

Everytime I restart windows i need to pair it again or else it won't work. The keyboard also needs to be switched on and off before re pairing.

Windows recognizes the keyboard after booting but it won't establish two way communication to be able to type. It shows the icon of a checkmark instead of the usual two green arrows and two way comm in widcomm.

It works flawlessly if I dont restart.

Any ideas how to make it work????

Hi!

I've succeeded in getting the Apple Wireless Keyboard to work on XP. Thanx to gunpowda and other helpful posts!

I thought I'd share some tips... It wasn't easy...

I've been using the wireless keyboard for a couple of days and it works extremely well. Here's what ya get:

1. Keyboard auto-pairs invisibly before XP login. It just works. No futzing after each restart (that would have been a deal-killer)
2. Caps lock light works correctly. All keys work, except the 4 multimedia keys top right. Haven't looked into that yet.
3. In BIOS screens and other very early startup events, the bluetooth of course isn't running yet...
4. So smooth. Nice and fast to type on. Quiet action. No interference or stickyness despite all the other wireless gear I've got running.

This is NOT a definitive how-to, but might inspire...

I'm using a fairly new Bluetooth USB adapter: "Trust Bluetooth 2.0 EDR USB Adapter, BT-2200Tp"

All the new Widcomm/Broadcom bluetooth stacks (versions 4.1+ and 5.0+) hit you with the grayed out pairing box Gunpowda posted about. It's a brick wall, don't bother trying to get around it.

You need an old Widcomm driver. Version 1.4 did the trick for me, but 1.3 and earlier may work.

1.4 finds the keyboard and prompts you with multiple choices for pairing: autopairing, choose PIN, et c.

Get to that screen and you're golden.


Driver repository: The GSM-HOSTING forum is great for pointers to very old (and v. recent) drivers.

http://forum.gsmhosting.com/vbb/showthread.php?t=106274

All the best -R.

Thanks everyone for your effort. I'm replying this post using apple wireless keyboard.
I'm glad i saw this post and do the right thing beofore i stepped out to buy BT adapter.

I'm using windows xp sp2 and DBT-120 adapter. The main issue i encounter is still replacing the MS BT driver with the widcomm driver come with DBT-120.

I found a good cocument teaching you how to:

http://www.e-beam.com/support/Switching_fr..._to_WIDCOMM.pdf

However, I have to do the switching driver thing in "safe mode" . Otherwise, the widcomm driver won't show up in the stack when i update the MS BT driver.

Now, everything works very good.

everyone ....strange things happened here.
MS BT generic driver seems working better than widcomm~~

The thing is that i found the keyboard sometimes worked but sometimes didn't when i restarted the computer. I have to mannually disconnect and connect again.

Therefore i decided to uninstall widcomm driver and restart and then reinstall again and see if it can automatically get connected every time i restart.

And then of course the windows generic driver took place aftr i uninstall widcomm and restart the computer.
Then i suddenly had the idea that why don't i just give the generic driver a try before i reinstall widcomm driver and replace MS BT driver.

To my surprise, it works. Now i felt stupid that i spent lots of time yesterday just trying to figure out how to replace it with widcomm.

Hello all.

I am using my Apple Keyboard with the new drivers without having to revert to the old drivers.
Its very easy. It took me a while to figure out how, but here is how.


With the regedit modify these two values.

HKEY_CURRENT_USER\Software\Widcomm\BtConfig\General

Set
PinCodeWord

To a value of
1111

Set
UseFixedPin

To a value of
1



Then attempt pairing.
Whne you get to the greyed PIN screen on the Apple Keyboard type

1111

Then Press the Return key on the Apple keyboard

Voila paired.

I have attempted to try other ways subsequentl, but I could never figure out how to UNPAIR the keyboard.


BeDammit

Ok, my UK Mac bluetooth keyboard seems to work just fine with my microsoft bluetooth dongle on XP - nothing special to do ....it just worked.

BUT I have a simple key mapping problem that's driving me potty. ....


by using a british keyboard listed under regional & language input languages, I can either have my £ key mapped to it's correct key (ie above the number 3) BUT unfortunately the @ and " symbols are swapped

OR

by using a US keyboard listed under regional & language input languages, I can have the @ and " symbols on their correct keys BUT then I get a # instead of a pound sign!!


I can't seem to work out a way to get the £, @ and " symbols on their correct keys! (& even if I did, where would the hash key be?!)

This post has been edited by HankMcSpank: Apr 20 2006, 09:31

Hello all.
I would like to thanks BeDammit for his brilliant solution.
I' ll add some extra information to help people flawless set up their Apple Bluetooth keyboard on Windows XP.

1. Press Win Start button, choose Run and then type regedit and press enter to access windows registry editor.

2. Into the registry editor search for and select -> HKEY_CURRENT_USER\Software\Widcomm\BtConfig\General

3. Set the key 'PinCodeWord' to a decimal value of 1111

4. Set the key 'UseFixedPin' to a decimal value of 1

5. Then attempt pairing. When you get to the greyed PIN screen type 1111 using OTHER keyboard THAN Apple Bluetooth keyboard.

6. Press the Return key on the Apple keyboard.

7. Enjoy your nice Keyboard.

I think this one is the best solution cause you don't have to mess with windcomm driver version.
Thanks again BeDammit.

This post has been edited by dongaspa: Jun 7 2006, 23:30