Recommended Posts

Hey guys. I've been using a MX518 for about a year now, it's been a really well behaved mouse but i'm looking to upgrade into something better. Any recommendations on which mouse I should get? I do light gaming and photoshop work if that helps in your recommendations.

Thanks!

EDIT: I'm looking for something VERY ergonomic!

Edited by WarLuigi
Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/
Share on other sites

If you want to keep the same feel, you can look to the G5 v2 or G7 (wireless).

The only thing I do no like about my G5 v2 is the wheel hump. It's quite high when compared to the MX500/510/518. Other than that, the G5 v2 is a good replacement for a MX500/510/518 user. I also have a first gen G5, and the G5 v2 is the one you want to get, since it adds the extra thumb button, as seen on the MX series.

I have the Razer Copperhead and it doesn't suit me well. It's not quite so ergo but it caters to both lefties and righties, whereas the MX and G series I spoke about are only righties. I have not tried any of the other mice to tell you first hand at how they compare. Hope someone can help you out there.

If I were you, I might look at keeping the MX518, unless it is really wearing out. One of the biggest plusses to go with the G series is the mouse feet as they don't offer alot of resistance during movement(which is a big plus for some/most gamers).

I only really mentioned the mouse that I have tried. Only the G7 I don't have, but I figure it's the same as the G5 only heavier.

The Logitech MX Revolution is quite a nice mouse too, and may fit your needs more than a full out gamer mouse.

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589917240
Share on other sites

The MX Revolution does seem like a good alternative. But i've read some reviews and it's plagued by it random disconnects and by being dead on arrival. I love outside the US. So I have to order it, get it sent to PO BOX, then wait for it to be shipped here. So if my unit did come defective i'm basically throwing away 100$ + Shipping .

Anyone here have any experience with the MX Revolution?

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589919092
Share on other sites

I got an MX Rev about 4/5 days ago, and I'm loving it. I was using the S510 k/m combo and the Revolution blows it out the water. Such a nice mouse :)

I love the S510 best keyboard I've ever owned. What OS are you using your mouse in? And if it was'nt too much trouble what are your system specs.

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589919214
Share on other sites

100% any razer mouse. Use to be a huge logitech fan but after razer, no going back.

As I understand it Razer mouse are good for gaming for their high dpi and whatnot. But they just don't seem to comfortable to me. They really downplay ergonomics on those mice. I've been using computers for about 10 years now and probably will for another 40. I would'nt like to suffer from carpal tunnel or chronic tendinitis just because of a non ergonomic mouse.

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589919256
Share on other sites

The MX Revolution does seem like a good alternative. But i've read some reviews and it's plagued by it random disconnects and by being dead on arrival. I love outside the US. So I have to order it, get it sent to PO BOX, then wait for it to be shipped here. So if my unit did come defective i'm basically throwing away 100$ + Shipping .

Anyone here have any experience with the MX Revolution?

I've been using one for about a year I think, and it's great, best mouse I've ever had. Very customisable, loads of buttons, great scroll wheel, and it's never disconnected once.

I also have a DeathAdder just for gaming. I'd never use it as a day to day mouse, the scroll wheel is too stiff (which is great in games) and while my hand rests on it, I always right click by accident because the button is so sensitive (again, great for games).

EDIT: LOL you changed your name while I was replying, I wondered wtf was going on! You know you can only change it so many times right?

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589919388
Share on other sites

I've been using one for about a year I think, and it's great, best mouse I've ever had. Very customisable, loads of buttons, great scroll wheel, and it's never disconnected once.

I also have a DeathAdder just for gaming. I'd never use it as a day to day mouse, the scroll wheel is too stiff (which is great in games) and while my hand rests on it, I always right click by accident because the button is so sensitive (again, great for games).

EDIT: LOL you changed your name while I was replying, I wondered wtf was going on! You know you can only change it so many times right?

So I guess the Revolution it is :p . I'll be getting it in a month or so I hope and I'll post a review after that.

@ DARKFiB3R : Yeah you can only change it twice in 90 days i think. But i used up one change cause I did'nt read so now i'm stuck for the next 90 days. Anyways it's my name:).

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589919412
Share on other sites

Heh, I'm using it under Windows XP SP2, with specs that can run Crysis at low-med settings. E6400 CPU, 2gb RAM, etc.

Also, the S510 is a really great set, but since my mate gave me an old DiNovo Edge he didn't use, I'll be using that when I can contact Logitech about a charger for it :)

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589919496
Share on other sites

thought i'd post this here.... the roccat kone is released, http://www.roccat.org/Products/Products/ROCCAT-Kone/ maybe you could give it a try

Wow that is a really nice looking mouse. I love how the leds change to whatever you want. My gripes are. WAY too expensive, i can't really justify 140$ US for a mouse. Not as ergonomic looking as the MX Revolution. WIRED. I want to reduce wires not add on more.

Anyways if I strike on a pot of gold i'd get it for sure :p . THANK!

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589929414
Share on other sites

thought i'd post this here.... the roccat kone is released, http://www.roccat.org/Products/Products/ROCCAT-Kone/ maybe you could give it a try

pretty hot looking mouse.. Looks alot like a razer, but the color options are pretty sweet.. but its expensive, and it isn't sold in the US as of now looks like.

Link to comment
https://www.neowin.net/forum/topic/678132-new-mouse/#findComment-589929470
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Universal Media Server 15.6.0 by Razvan Serea Universal Media Server is a DLNA-compliant UPnP Media Server. UMS was started by SubJunk, an official developer of PMS, in order to ensure greater stability and file-compatibility. The program streams or transcodes many different media formats with little or no configuration. It is powered by MEncoder, FFmpeg, tsMuxeR, AviSynth, MediaInfo and more, which combine to offer support for a wide range of media formats. Because it is written in Java, Universal Media Server supports all major operating systems, with versions for Windows, Linux and Mac OS X. To see a comparison of popular media servers, click here. Universal Media Server 15.6.0 changelog: General Added Discogs integration for audio metadata and UPnP Added new options for DNS resolution handling (thanks, @henry701 Henrique Campos!) Added a loading indicator to the Shared Content area on the web settings (#6037) Improved detection of sample videos Improved stability of speed test (thanks, @henry701 Henrique Campos!) Fixed support for servers with no Internet access (#6047) (thanks, @henry701 Henrique Campos!) Fixed wrong Linux yt-dlp binary being packaged (#6011) (thanks, @Pro-pra!) Fixed API lookups happening for TV series when episode lookup fails, even if the series metadata is already in the local database (#6080) Fixed JDK being used in Docker image instead of JRE (#6089) (thanks, @mvanhorn Matt Van Horn!) Fixed editing a video feed on the web settings erases the URL (#6046) (thanks, @serinekjo kjo!) Fixed docs for FFmpeg GPU support (thanks, @Harshit-dell Harshit Kumar Sahu!) Translation updates via Crowdin Dutch (97%) (thanks, Lefteye!) English (United Kingdom) (80%) (thanks, Andi Chandler!) Italian (63%) (thanks, parduz!) Portuguese (Brazilian) (67%) (thanks, Henrique Campos!) Download: Universal Media Server 15.6.0 | 157.0 MB (Open Source) Download: Other operating systems View: Universal Media Server Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • When you're in enterprise IT environment, you're kinda forced into it...otherwise I'm not touching any mail client for personal use.  I can't stand New Outlook. It's complete trash - half the features I need in (Classic) Outlook are just missing in New Outlook. I haven't talked to a single person who actually likes the new client. 
    • I think it's cute that Apple is implementing their tools at precisely the same evolutionary level as other devices' tools. In other words, I see no innovation; it's "the same but different." "Hey Siri, help me write this document about shoes." Powered by Google. "Sure thing, while we're here, can I interest you on some Nike's? They're on sale at Target right now!"
    • Walmart was still selling the Apple Watch SE 2 on Black Friday in 2024. I got 1 for my mom and one for my dad for christmas.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      222
    3. 3
      ATLien_0
      92
    4. 4
      +Edouard
      86
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!