wow, i just tried the p4 0.2 one =) It runs so much more better

what do i need to do to change the ram to 192 or 320 i tried changing the hex number to 0x14000000 but osx still says 128 ram i really want more ram

is it capable of smoothly displaying the Genie effect yet?

I hope it will be very soon possible to make a connection to the internet.

Just think of the possiblities of this program once it matures more, you will never need to buy Apple hardware again to run their OS !!!!

1) genie effect runs real well, but not butter smooth yet (It runs only butter smooth when i used the itunes "zoom" mode)
2) connection to the net will be very later
3) When time passes, it hope to get to 1/10 of cpu speed. It wont be perfect but usable right now, its at probably 1/39

i say 5-6 months,and we got OSX running at 100% speed

Could this bring the end of Apple or at least cheaper hardware ?

ok i just tried changing the ram to 10000000 but it still shows 128 mb of ram
And
My clock is now moving at 15 seconds.
The minutes r changing every 15 seconds!!!!!!!!!

I have this problem
I set up the config and when I startup pearpc I got this

I used the img from here - http://www.emaculation.com/phpBB/viewtopic.php?t=1102

unless u are implying that we have an x86 version of MAC OSX, I don't think any emulator can emulate at 100% of your CPU, i mean, just look at Virtual PC, how long that's been out especially on x86 computers, yet still not even close.

The speed of PC's keeps increasing so we will get to a point where it is an acceptable speed to use properly.

dude read from step 10

That doesnt work
Im in step 5 and I cant see what the step said: "you should see the main startup screen, with just the .iso "cdrom" listed as bootable"


btw Here's my config file

Yes, on my system at least.

KoL, i don't know if this will help, but when I was trying to install 10.2, it simply would not work unless i specified where the video.x files was located....i'm not sure why, but it worked after that

KoL,use this to fix http://s87840517.onlinehome.us/fixboot.html

well I think is my version of Panther. I dont know

I tested the lastest official release (0.1.2) in Longhorn build 4074, and it was really slow. The cmd windows showed up first, but the main screen didn't even show up for a minute. (It's usually instant on XP). After that, everything seemed to slow down exponentially. I couldn't get to the Mac OSX boot screen without turning it off from boredom.

I'm not complaining, just reporting the results of my limited tests.

one of my friends, who loves macs, and has been using for longer then i know. said that they may have made the time a lot quicker on purpose. OS X's visual effect are time based, so on a fast computer the effects look good in normal time. But in order to make the effects look like right on a machine that is as slow as PearPC they sped the time up.

Don't know if it's true or not, but it makes sense.

Quick heads up, for those having trouble fiddling with memory settings, try PearGUI. Makes a config file in an easy-to-use GUI.

I use PearPeeler...er where the link for it brb.

Yup, PearPeeler's nice too...btw, program's in English

EDIT: Just a quick question, with the .2pre version of PearPC, I get artifacts ("left-behind" clips of moved windows and such). Is my refresh too low? I have it set to 15 and it was butter smooth under 1.1/1.2

http://www.pearpc.sourceforge.net/ Removed?

Cant find damn link

I want to add net for my mac os x how do I do this I have a router and on board (Nforce 2) LAN is this possble?

http://pearpc.sourceforge.net (no www )

Under windows, networking isn't yet possible

no www.

http://pearpc.sf.net


ahh, beat me to it. lol

remove the www from the link.. use >> http://pearpc.sourceforge.net/

damn too late..

Ok thanks guys

You get this using the gcc compilers:



I haven't tried to compile it myself foy my Athlon64 yet. I will probably have time to do that some day this week.

Genie effect: (It's pretty slow. It really is just Frame 1: In the dock, Frame 2: Warped window, Frame 3: Normal window.)
http://www.ezgoo.net/1705genie234234234.JPG
http://www.ezgoo.net/1705genie123123123.JPG

offtopic

tsiris:
trikala sucks, karditsa rules..

Weird, my genie effect is really smooth. it's slower then a real apple, but not that bad.

I have been using PearPC since the first public release now and I am still very happy with it.
Now, after having installed Panther, I tried to install Mandrake Linux 9.1 PPC - twice, without success.

Everything runs well up to the point, the machine needs to be rebooted at the end of the installation. After reboot, PearPC keeps telling me there's no bootable partition and I have tried every single partition available (in 'select' mode).
I have partitioned the 6GB hard disk image into two partitions under Panther. The first 3GB I left empty (free space) and the second was partitioned as HFS Extended. Then, I began installing Mandrake and let it partition automatically. There was no obvious problem during the installation. So this leads me to the question: What do I have to do in order to be able boot Mandrake Linux?
Any help would be appreciated.
BTW, I also get these artifacts with the latest trunk 0.2pre version (optimized for P4).

latest shot

Ok, and what exactly is that within PPC?

the Nature screen saver.

exactly what ker said.

can anyone run the expose effects smoothly?

i can run expose pretty smoothly

but again my time is really fast
1 minute = 15 seconds
do u thing it has something do do with the redraw rate at 45ms

And again how do i take a dmg and make it iso. Ive tried winiso, nero and just changing the extention none work.
Has anyone done it before?

and is there printer support yet, i got a usb hp printer

Huh, the theme files are .dmg's , I try putting them in an iso file and than setting the ISO file as a mounted CDROM drive and yet , it wont wont..any idea?

Just try to mount it again, mine didn't work the first time either. Also, you might need shapeshifter for some themes.

Hehe - quicktime Movie jumps alot, like its being sped up - must be some problem with PearPC refesh rate, as its probly the same that casues the 1 min = 15 secs prob .

is this real? can someone summarize the 83 pages?

Yep, it's real! The latest nightly is mighty fast.

yes its real and that makes sense about the refresh rate i still wish there was a way to convert dmg to iso

i can run genie effects pretty smoothly, i have my redraw at 50.

also, on that dmg thing. i got those errors too, and made the mistake of mounting anyway...and it really messed things up, i couldn't boot osx at all, hard to reinstall.

also: "oooh!; aaah!; nice!; it works!; slow!; latest one is fast!; uuuh!; pretty!; how can i get this to work?; oooh!; aaah!"

Copy the contents of the "CD" to your "hard drive", then try installing from there. I noticed this too...things don't like to install from the "CD".

WillVG, what exactly is this dmg you're trying to convert to iso, and what're trying to do with it?

rofl

Yep, that summarizes it alright.