LightShadow Posted September 21, 2012 Share Posted September 21, 2012 So after recently updating to a Netgear DGN2200 (After thinking our DG834G was faulty for the exact same problem), have been having issues with it and my iOS devices. Half of the time, they can't even detect the network, and when they do, it can just drop out for minutes at a time. But the problem is non-existant on every other device. I have gone through every setting I could find on the router to no luck. Current security is WPA2, but have tried all the others, and have tried all Channels too. Have also factory reset and restored all the iOS devices to no luck either. Any suggestions? Unless I have very bad luck and just got faulty iOS devices. (Forgot to mention, SSID is set to visable, and happens with guest networks too). Link to comment Share on other sites More sharing options...
RadishTM Veteran Posted September 22, 2012 Veteran Share Posted September 22, 2012 Change the wireless mode to 145Mbps instead of 300Mbps and leave the channel settings on "Auto". Give that a shot :) Link to comment Share on other sites More sharing options...
remixedcat Posted September 22, 2012 Share Posted September 22, 2012 iOS version? tried any firmware updates? any other apple products have this problem? tried the 30/30/30 trick? Link to comment Share on other sites More sharing options...
helpifIcan Posted September 22, 2012 Share Posted September 22, 2012 You might also try setting the problem devices to a static IP. Link to comment Share on other sites More sharing options...
LightShadow Posted September 22, 2012 Author Share Posted September 22, 2012 I have tried all 3 wireless modes, tried all the channel modes etc to no effect. Tried updating the firmware, and tried factory resets. My iPad and iPod have the problem, but it's minor compared to my phone. What's the 30/30/30 trick though? Link to comment Share on other sites More sharing options...
Recommended Posts