Task Manager reporting wrong CPU frequency


Recommended Posts

Don't know if this is a bug or a feature but the Windows 8 Task Manager always shows frequency higher than CPU-Z.

When I do CPU intensive task, it shows 5.10 Ghz frequency which is obviously wrong as my i5-3550 has maximum frequency limit of 4.10 Ghz.

fmrpM.jpg

Anyone noticed this? Clean re-install nor updating BIOS helped.

Link to comment
Share on other sites

Well your CPU will automatically underclock itself when it's not being used, so that part is probably correct.

But when it displays 5.1GHz, I have no idea what's going on there. Does CPU-Z show the same thing?

Link to comment
Share on other sites

This is normal if speedstep is on and you are using Balanced as your power plan AFAIK.

The CPU will clock down, then clock up to it's standard operating speed. That CPU operates at 3.30Ghz, and Turbos up to 3.7Ghz. Run prime95 on it and you should see it go up to 3.7Ghz.

I don't see where it says 5.1ghz but I don't know why it's showing 4.1Ghz unless you overclocked it

Link to comment
Share on other sites

CPU-Z shows 4.1 Ghz. Windows task manager shows 4.8 Ghz or 5.1 Ghz depending on it's mood.

I would definitely say it's a Windows problem then. But you shouldn't be surprised. :rolleyes:

Link to comment
Share on other sites

Don't know if this is a bug or a feature but the Windows 8 Task Manager always shows frequency higher than CPU-Z.

When I do CPU intensive task, it shows 5.10 Ghz frequency which is obviously wrong as my i5-3550 has maximum frequency limit of 4.10 Ghz.

Anyone noticed this? Clean re-install nor updating BIOS helped.

the newer intel cores have "Turbo Boost". Which will underclock your CPU automagically during low loads. During more CPU intensive tasks it will bring it up to speed. It's possible that when CPUz is launched it doesn't have much load and as such you see a lower speed, whereas I am assuming Windows 8 can take that into account and show the maximum, as well as the current.

Link to comment
Share on other sites

  • 2 months later...
i5-3550 is Non-K edition. It cannot be overclocked.

That has absolutely nothing to do with it. Turbo Boost doesn't require a K series processor and is enabled on most of the I-series processors. Basically if it detects that a running program isn't multi-core optimized it shuts off some (1, 2, or even 3) of the cores and overclocks the remaining cores.

For example, my processor is 1.73 but with turbo boost enabled (on 1 core for this example) it rises to 2.93.

What's weird though is Intel says your CPU has a max turbo frequency of 3.7, but Windows is reporting 4.1/5.1 :/ Maybe your motherboard/BIOS is reporting the wrong CPU?

Link to comment
Share on other sites

^^ Motherboard and Bios are reporting the exact CPU which I purchased. It's just that Windows Task Manager reports incorrect frequency compared to CPUz or any other CPU freq monitoring program.

This issue has nothing to do with overclocking. The new Task Manager in Windows 8 is incapable of reading correct CPU speeds in some cases. I call this Windows bug.

Link to comment
Share on other sites

People replying about Speedstep, try reading again. Looking at the pictures will help explain, also. That's what they're there for.

That being said, I've not seen that, but I generally use slightly older processors. Maybe it's the way the newer ones are seen by the OS?

Link to comment
Share on other sites

This topic is now closed to further replies.