Elliot B. Posted January 2, 2013 Share Posted January 2, 2013 Trying to replace the video card that came inside an Acer E300-J973 PC (bought early 2006). It came with a "PCI Express GeForce 6600 256MB" (released late 2005). The card itself states "VG.66001.256". Ebuyer has the following types of PCI Express video card: PCI Express (3) PCI Express 2.0 x1 (1) PCI Express 2.0 x16 (43) PCI Express 3.0 (3) PCI Express 3.0 x16 (83) PCI Express x1 (3) PCI Express x16 (6) Which type will fit inside the PC? I am 90% sure it's a PCI Express x16 card (looking at the connection type), but there are three types of PCI Express x16 card above. Link to comment Share on other sites More sharing options...
ObiWanToby Posted January 2, 2013 Share Posted January 2, 2013 These were some of the first cards to come with PCIe, they used a bridge chip to convert from AGP to PCIe. My guess is PCI Express x16 will do fine. 2.0 was not out, neither was 3.0. Link to comment Share on other sites More sharing options...
Crisp Posted January 2, 2013 Share Posted January 2, 2013 2006, the year after BF2 came out :D from that age, I would say PCI-e x16 also. The most common one for graphics cards is x16, I'm not sure when 2.0 came out, but first gen PCI-e will fit. Link to comment Share on other sites More sharing options...
Detection Posted January 2, 2013 Share Posted January 2, 2013 PCI-E x16 - Either 1.0, 2.0 or 3.0 are all backward compatible with x16 slots, just means they will run at the boards speed Similar to RAM, so long as its DDR2 it doesn't really matter what speed you get, it will run at the highest supported speed the board can provide So PCI-E x16 is the slot, - 1.0, 2.0. 3.0 is the interface speed of the card/board You could install a PCI-E x16 3.0 card into a PCI-E x16 1.0 slot and vice versa Arkose 1 Share Link to comment Share on other sites More sharing options...
Crisp Posted January 2, 2013 Share Posted January 2, 2013 So PCI-E x16 is the slot, - 1.0, 2.0. 3.0 is the interface speed of the card/board You could install a PCI-E x16 3.0 card into a PCI-E x16 1.0 slot and vice versa That's good to know. Thanks :) Detection 1 Share Link to comment Share on other sites More sharing options...
theyarecomingforyou Posted January 2, 2013 Share Posted January 2, 2013 PCI-E x16 - Either 1.0, 2.0 or 3.0 are all backward compatible with x16 slots, just means they will run at the boards speed This. As long as you have a PCIe x16 slot (i.e. the 'long' slot type) then any modern graphics card will function in it, provided it will physically fit in the case. If your system is old then make sure you have enough power connectors on your PSU. Detection 1 Share Link to comment Share on other sites More sharing options...
Raa Posted January 2, 2013 Share Posted January 2, 2013 It is a PCI-E 16x 1.0 card. You are able to buy a current PCI-E 16x card (of 1.x, 2.x or 3.0 standard) and it will work correctly (but not to full capability) in your computer. Link to comment Share on other sites More sharing options...
Elliot B. Posted January 2, 2013 Author Share Posted January 2, 2013 Cheers guys :) Detection 1 Share Link to comment Share on other sites More sharing options...
Recommended Posts