HOWTO: Force-update Flash Player for IE10 on Windows 8


Recommended Posts

As everyone may already be aware, Microsoft's Adobe Flash Player updates were just security patches, leaving the ActiveX control still at the factory-shipped version!

So I found this over on the Adobe Forums:

HOWTO: Force-update Flash Player for IE10 on Windows 8

Tired of waiting around for Microsoft to issue a Windows update for Flash Player since... well... forever?

Windows 8 ships with Flash Player version 11.3.378.5 while now we're already at version 11.5.502.146! Adobe won't update this ActiveX control if you're using Windows 8, because apparently Microsoft has to release the update themselves. They promised to release such updates frequently, however, it's been many months and not one update had ever been released as of yet.

Here's how you can bud in, get in there, and update the ActiveX control yourself:

  1. Notice the version you have installed right now by looking at #2 on this page: http://helpx.adobe.c...ash-player.html
  2. Download the new Flash.ocx files (32-bit and 64-bit) here: http://sites.google....1_5_502_146.zip
  3. Copy these instructions into Notepad or similar, because you must close all running instances of Internet Explorer right now.
  4. Go to C:\Windows\System32\Macromed\Flash
  5. Right-click Flash.ocx and go to Properties.
  6. Go to the Security tab, and then click Advanced.
  7. Click Change next to "Owner:"
  8. Type the following into the box that appeared and then click OK: Administrators
  9. Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  10. Click OK and then click Yes.
  11. Click OK.
  12. Rename Flash.ocx to Flash-original.ocx
  13. From the ZIP file you downloaded you will see a folder called System32. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash
  14. That was for the 32-bit version that gets used. Now repeat steps 3 through 12 for the 64-bit version which also gets used, by replacing all occurrences of "System32" above with "SysWOW64". If you do not find a folder on your computer at C:\Windows\SysWOW64\Macromed\Flash then you actually do not need to repeat the steps for the 64-bit version, because your Windows 8 edition is 32-bit

And PRESTO! Revisit #2 on this page and notice the new version number detected: http://helpx.adobe.c...ash-player.html

Granted; there are version number entries to update in the registry but I doubt that this makes any difference. Best to leave those as-is in case an update finally comes along.

ENJOY!

Link to comment
Share on other sites

Thanks (Y)

This restores Optimus kicking in for Flash videos in IE. Definitely helps with smoother playback of videos.

Link to comment
Share on other sites

I wonder why MS hasn't updated it yet? I guess they're double and triple checking things for bugs and security holes so maybe. Unless they only update it when they push out a bigger IE update?

Link to comment
Share on other sites

I wonder why MS hasn't updated it yet? I guess they're double and triple checking things for bugs and security holes so maybe. Unless they only update it when they push out a bigger IE update?

The issue isn't Microsoft but Adobe - that is where the venting and frustration should be focused.

Link to comment
Share on other sites

The issue isn't Microsoft but Adobe - that is where the venting and frustration should be focused.

its always ms's fault :)

I have no issues with ie10 and flash. My lady friends however complain Facebook games sometimes lag.

Link to comment
Share on other sites

Revised instructions including 11.6 beta OCX files:

  1. Download your choice of Flash version here: https://sites.google...e/flashactivex/
  2. Copy these instructions into Notepad or similar, because you must close all running instances of Internet Explorer right now.
  3. Press WindowsKey+Pause to bring up your System information. Check which "System type" you have.

32-bit system type:

  1. Go to C:\Windows\System32\Macromed\Flash
  2. Right-click Flash.ocx and go to Properties.
  3. Go to the Security tab, and then click Advanced.
  4. Click Change next to "Owner:"
  5. Type the following into the box that appeared and then click OK: Administrators
  6. Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  7. Click OK and then click Yes.
  8. Click OK.
  9. Rename Flash.ocx to Flash-original.ocx
  10. From the ZIP file you downloaded you will see a folder called SysWOW64. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash. SysWOW64 contains the 32-bit version of Flash.

64-bit system type:

  1. Go to C:\Windows\System32\Macromed\Flash
  2. Right-click Flash.ocx and go to Properties.
  3. Go to the Security tab, and then click Advanced.
  4. Click Change next to "Owner:"
  5. Type the following into the box that appeared and then click OK: Administrators
  6. Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  7. Click OK and then click Yes.
  8. Click OK.
  9. Rename Flash.ocx to Flash-original.ocx
  10. From the ZIP file you downloaded you will see a folder called System32. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash. System32 contains the 64-bit version of Flash.
  11. That was for the 64-bit version that gets used. Now repeat these steps for the 32-bit version which also gets used, by replacing all occurrences of "System32" above with "SysWOW64".

Revisit #2 on this page and notice the new version number detected: http://helpx.adobe.c...ash-player.html

Link to comment
Share on other sites

I was looking at the flash page on adobe.com and the newest version for Windows 8 is 11.3.x, while Windows 7 is up to 11.5. That's the official status right now. I bet MS will push out 11.5 at some point but since it's now built into IE10 it'll take some time.

Link to comment
Share on other sites

I was looking at the flash page on adobe.com and the newest version for Windows 8 is 11.3.x, while Windows 7 is up to 11.5. That's the official status right now. I bet MS will push out 11.5 at some point but since it's now built into IE10 it'll take some time.

IIRC Adobe has a special build to take into account the changes made in the Metro version. I do hope at some point that eventually either they upgrade or websites move over to html5 quickly.

Link to comment
Share on other sites

Is there any pressing reason that they're using a version of Flash on Windows 8 that is 2 cycles out of date?

Link to comment
Share on other sites

Is there any pressing reason that they're using a version of Flash on Windows 8 that is 2 cycles out of date?

Look above yoru post - I answered that very question. Please actually read peoples posts and you might learn something.

Link to comment
Share on other sites

I don't see why the condescending rudeness was necessary, your post wasn't there when I opened the reply box. And it would be nice if people considered these possibilities before being rude.

Link to comment
Share on other sites

I haven't updated my Flash manually at all, but I did notice last week that I got a Flash Player update thru Windows Update (I believe to 11.5). Imagine my surprise when I checked for updates after remembering it was Patch Tuesday and SHAZAM, another Flash update (11.6).

I remember having gotten Flash updates previously, but none ever so quickly and close to another. Hopefully Adobe/Microsoft keep the ball rolling.. maybe an update every Patch Tuesday would be a good schedule.

Link to comment
Share on other sites

I haven't updated my Flash manually at all, but I did notice last week that I got a Flash Player update thru Windows Update (I believe to 11.5). Imagine my surprise when I checked for updates after remembering it was Patch Tuesday and SHAZAM, another Flash update (11.6).

I remember having gotten Flash updates previously, but none ever so quickly and close to another. Hopefully Adobe/Microsoft keep the ball rolling.. maybe an update every Patch Tuesday would be a good schedule.

No, the recent one was still 11.3

Todays changed it to 11.6

Link to comment
Share on other sites

Why is it that some websites that require Flash player dont work (like miniclip) on modern version of IE10 and others do (like youtube, vimeo etc)?

Yeah the metro version of IE10 uses a white list and allows specific sites to use flash while to blocks the ones not in the list. There is a tool you can get that let's you add sites to the white list if you want or there is a way to do it manually.

Link to comment
Share on other sites

  • 6 months later...

Hi I tried to follow the instructions as proposed below: but got stumped at step 6, I was unable to tick the "full control: box" therefore could not  complete the process.

 

My problem is, many site I visit ask to  install the Adobe Flash Player add on, but as it is embedded in Windows 8, and am unable to uninstall/reinstall Flash Player, am I going about solving my problem the right way.

 

32-bit system type:

  • Go to C:\Windows\System32\Macromed\Flash
  • Right-click Flash.ocx and go to Properties.
  • Go to the Security tab, and then click Advanced.
  • Click Change next to "Owner:"
  • Type the following into the box that appeared and then click OK: Administrators
  • Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  • Click OK and then click Yes.
  • Click OK.
  • Rename Flash.ocx to Flash-original.ocx
  • From the ZIP file you downloaded you will see a folder called SysWOW64. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash. SysWOW64 contains the 32-bit version of Flash.
Link to comment
Share on other sites

  • 1 year later...

I know this is an old thread, but the way I solved it was to choose a different operating system (Windows 7) on the Adobe flash download page and run the installer.  I'm running Windows 10 Preview with IE 11.  Windows now manages the flash plug-in, but it wasn't keeping up with Adobe, so installing the Windows 7 Active-x version did the trick.

Link to comment
Share on other sites

This topic is now closed to further replies.