Mindovermaster Moderator Posted May 22, 2013 Moderator Share Posted May 22, 2013 Did you initialize the drive? Go to Disk settings, see if it is there. Link to comment Share on other sites More sharing options...
+BudMan MVC Posted May 22, 2013 MVC Share Posted May 22, 2013 The drive fell from 1.5 FT, as already stated this most likely damaged something in the case (circuit board that converts your sata/pata connection to USB) or the drive itself is damaged. As already suggested - take the drive OUT and directly connect it to your computer via its sata or pata connection. Or use another USB to drive cable.. They are fairly cheap around $20 or so here in the the US, and can be ordered from any online shop if you don't have a place to buy one. If the drive works when directly connected to your machine or via a usb drive cable.. eample http://www.newegg.co...N82E16812232002 Then you could just buy a replacement case for it... Or just use it internal, etc. If does not work when directly connected to your computer or via another usb cable like above - then it was most likely damaged in the fall. I doubt warranty covers dropping them.. So you might just be out of luck, you could contact them and ask if warranty covers you dropping it from 1.5 feet. Good luck with that ;) Arun Kashyap 1 Share Link to comment Share on other sites More sharing options...
Arun Kashyap Posted May 22, 2013 Author Share Posted May 22, 2013 The drive fell from 1.5 FT, as already stated this most likely damaged something in the case (circuit board that converts your sata/pata connection to USB) or the drive itself is damaged. As already suggested - take the drive OUT and directly connect it to your computer via its sata or pata connection. Or use another USB to drive cable.. They are fairly cheap around $20 or so here in the the US, and can be ordered from any online shop if you don't have a place to buy one. If the drive works when directly connected to your machine or via a usb drive cable.. eample http://www.newegg.co...N82E16812232002 Then you could just buy a replacement case for it... Or just use it internal, etc. If does not work when directly connected to your computer or via another usb cable like above - then it was most likely damaged in the fall. I doubt warranty covers dropping them.. So you might just be out of luck, you could contact them and ask if warranty covers you dropping it from 1.5 feet. Good luck with that ;) What do I do to the PCB? Did you initialize the drive? Go to Disk settings, see if it is there. Where? Link to comment Share on other sites More sharing options...
Mindovermaster Moderator Posted May 22, 2013 Moderator Share Posted May 22, 2013 Arun, throw away the PCB.. Initialize: http://www.ehow.com/how_2224638_initialize-new-disks.html Link to comment Share on other sites More sharing options...
+BudMan MVC Posted May 22, 2013 MVC Share Posted May 22, 2013 "What do I do to the PCB?" What?? You don't do anything with the circuit board in the case (PCB - Printed Circuit Board).. It was most likely damaged in the fall. I think there is a bit of language barrier so far in this thread. You have been told MULTIPLE times to open up the case and take the drive out and connect it to your PC directly.. I don't know how else to explain this too you. I would suggest you have a friend that understands english better read this thread and translate for you. Mindovermaster 1 Share Link to comment Share on other sites More sharing options...
Arun Kashyap Posted May 22, 2013 Author Share Posted May 22, 2013 "What do I do to the PCB?" What?? You don't do anything with the circuit board in the case (PCB - Printed Circuit Board).. It was most likely damaged in the fall. I think there is a bit of language barrier so far in this thread. You have been told MULTIPLE times to open up the case and take the drive out and connect it to your PC directly.. I don't know how else to explain this too you. I would suggest you have a friend that understands english better read this thread and translate for you. I am sorry for understanding after a lot of time...I don't know much about the hard drive technologies :) . I'll ask a technician to connect it to the CPU. I'll ask later if I have any query. :) Link to comment Share on other sites More sharing options...
spikey_richie Posted May 22, 2013 Share Posted May 22, 2013 "What do I do to the PCB?" What?? You don't do anything with the circuit board in the case (PCB - Printed Circuit Board).. It was most likely damaged in the fall. I think there is a bit of language barrier so far in this thread. You have been told MULTIPLE times to open up the case and take the drive out and connect it to your PC directly.. I don't know how else to explain this too you. I would suggest you have a friend that understands english better read this thread and translate for you. Go easy on him Bud, he's 15 and his English is better than some other people on this forum. P.S. How's your Tamil? Link to comment Share on other sites More sharing options...
Arun Kashyap Posted May 22, 2013 Author Share Posted May 22, 2013 Go easy on him Bud, he's 15 and his English is better than some other people on this forum. P.S. How's your Tamil? Lol! Thank you very much for the compliment :)...by the way, I am fluent in Telugu, don't know much Tamil. :p Link to comment Share on other sites More sharing options...
+BudMan MVC Posted May 22, 2013 MVC Share Posted May 22, 2013 I wasn't meaning to be hard on him, just stating what I saw as an issue with the discussion. His english is much better than my any other language on the planet.. Just that it seemed there was something being loss in the translation - be it lack of understanding of the technical terms, etc. I have nothing but the greatest of respect for anyone that even can converse at basic level in multiple languages.. I can ask for the bathroom or a beer in spanish and german and french.. But thats about it ;) Technical terms can be the hardest between languages, I tried to be basic in my description of what needed to be done. Along with spelling out the PCB acronym being used, etc. Not sure how to say take the hard drive out of the case and directly connect it to your computer any simpler? <snipped per OP request> Link to comment Share on other sites More sharing options...
YounGMessiah Posted May 22, 2013 Share Posted May 22, 2013 Yeah BudMan is a great contribution to this forum :) He meant no harm Arun Kashyap 1 Share Link to comment Share on other sites More sharing options...
YounGMessiah Posted May 22, 2013 Share Posted May 22, 2013 To enlighten you OP, here is a video on how to do what everyone is suggesting (take the HDD out of the black case and then connect that HDD internally) . Its quite simple and dont be scared. Last night I took apart my Seagate GoFlex 750GB drive, so I could use it as a hot swap. Video: Arun Kashyap 1 Share Link to comment Share on other sites More sharing options...
Arun Kashyap Posted May 23, 2013 Author Share Posted May 23, 2013 To enlighten you OP, here is a video on how to do what everyone is suggesting (take the HDD out of the black case and then connect that HDD internally) . Its quite simple and dont be scared. Last night I took apart my Seagate GoFlex 750GB drive, so I could use it as a hot swap. Video: Thank you very much! :D Link to comment Share on other sites More sharing options...
Arun Kashyap Posted June 4, 2013 Author Share Posted June 4, 2013 I am back, with a new problem. I took out the hard drive from the casing, tried to connect it internally, but the hard drive was the same as it was before externally. What do I do? Link to comment Share on other sites More sharing options...
Mindovermaster Moderator Posted June 4, 2013 Moderator Share Posted June 4, 2013 Have you tried it, internally with a Linux boot-CD? Link to comment Share on other sites More sharing options...
ShareShiz Posted June 4, 2013 Share Posted June 4, 2013 You're SOL. Warrenty doesn't cover physically dammaged components. And you scratched the platters of your HDD. BTW. Seagate sucks. Lost 1.5 TB of crucial data because the damn thing didn't want to work a week after buying, and seagate wouldn't do anything about it. Seagate. A company to stay away from. Link to comment Share on other sites More sharing options...
Mindovermaster Moderator Posted June 4, 2013 Moderator Share Posted June 4, 2013 I had a Western Digital 1.5TB that I broke the SATA/Power connectors off. I sent in a RMA, and they just gave me a new drive. :) Link to comment Share on other sites More sharing options...
moloko Posted June 4, 2013 Share Posted June 4, 2013 I am in the same situation as the OP. Mine was a laptop drive, partitioned into 3. One for windows, 2 for other. The 2 others work fine, but the First Windows OS partition does not. I will also try with linux. Link to comment Share on other sites More sharing options...
Arun Kashyap Posted June 5, 2013 Author Share Posted June 5, 2013 On the advice of a technician, I am told to keep the hard drive in the refrigerator. Will this trick work? Link to comment Share on other sites More sharing options...
Recommended Posts