DocM Posted July 13, 2013 Share Posted July 13, 2013 The potential is that not only parts manufacturing on Earth could be cheaper / faster / lighter but that parts could be manufactured in space or other worlds without conventional factories. Part of the Game Changing techs initiative http://www.nasa.gov/press/2013/july/nasa-industry-test-additively-manufactured-rocket-engine-injector/#.Ud_tEhYnL8u NASA, Industry Test Additively Manufactured Rocket Engine Injector CLEVELAND -- NASA and Aerojet Rocketdyne of West Palm Beach, Fla., recently finished testing a rocket engine injector made through additive manufacturing, or 3-D printing. This space technology demonstration may lead to more efficient manufacturing of rocket engines, saving American companies time and money. NASA's Glenn Research Center in Cleveland conducted the successful tests for Aerojet Rocketdyne through a non-reimbursable Space Act Agreement. A series of firings of a liquid oxygen and gaseous hydrogen rocket injector assembly demonstrated the ability to design, manufacture and test a highly critical rocket engine component using selective laser melting manufacturing technology. Aerojet Rocketdyne designed and fabricated the injector by a method that employs high-powered laser beams to melt and fuse fine metallic powders into three dimensional structures. "NASA recognizes that on Earth and potentially in space, additive manufacturing can be game-changing for new mission opportunities, significantly reducing production time and cost by 'printing' tools, engine parts or even entire spacecraft," said Michael Gazarik, NASA's associate administrator for space technology in Washington. "3-D manufacturing offers opportunities to optimize the fit, form and delivery systems of materials that will enable our space missions while directly benefiting American businesses here on Earth." This type of injector manufactured with traditional processes would take more than a year to make but with these new processes it can be produced in less than four months, with a 70 percent reduction in cost. "Rocket engine components are complex machined pieces that require significant labor and time to produce. The injector is one of the most expensive components of an engine," said Tyler Hickman, who led the testing at Glenn. Aerojet Rocketdyne's additive manufacturing program manager, Jeff Haynes, said the injector represents a significant advancement in application of additive manufacturing, most often used to make simple brackets and other less critical hardware. "The injector is the heart of a rocket engine and represents a large portion of the resulting cost of these systems. Today, we have the results of a fully additive manufactured rocket injector with a demonstration in a relevant environment," he said. Glenn and Aerojet Rocketdyne partnered on the project with the Air Force Research Laboratory at Edwards Air Force Base, Calif. At the Air Force lab, a unique high-pressure facility provided pre-test data early in the program to give insight into the spray patterns of additively manufactured injector elements. "Hot fire testing the injector as part of a rocket engine is a significant accomplishment in maturing additive manufacturing for use in rocket engines," said Carol Tolbert, manager of the Manufacturing Innovation Project at Glenn. "These successful tests let us know that we are ready to move on to demonstrate the feasibility of developing full-size, additively manufactured parts." Crisp 1 Share Link to comment Share on other sites More sharing options...
Silpheed2K Posted July 13, 2013 Share Posted July 13, 2013 Awesome to see 3D printing taking off in a big way. Too bad the government is trying to crack down on such a thing. Damn does this power grip the politicians keep trying to enforce is annoying. The technology will open up all kinds of doors for people and small businesses. It will also put a lot of the manufacturing power back into the hands of the people when it becomes cheap enough. I'm genuinely stoked to see where this goes. Link to comment Share on other sites More sharing options...
DocM Posted July 13, 2013 Author Share Posted July 13, 2013 It's already hitting aerospace big; Boeing, GE and Airbus are starting to print metal parts and the Chinese are using printed large structural parts in their new front line and stealth fighters - including the front landing gear. This will land like a dropped mountain on the auto industry, more so because at least a couple of groups are working on printed batteries and fuel cells. MightyJordan 1 Share Link to comment Share on other sites More sharing options...
DocM Posted October 25, 2013 Author Share Posted October 25, 2013 And now SpaceX is 3D printing the crewed Dragon's SuperDraco launch abort/landing thrusters using inconel alloy https://twitter.com/elonmusk/status/375737311641628672 @elonmusk SpaceX SuperDraco inconel rocket chamber w regen cooling jacket emerges from EOS 3D metal printer http://pic.twitter.com/Tj284OuAk1 Link to comment Share on other sites More sharing options...
fusi0n Posted October 25, 2013 Share Posted October 25, 2013 30 seconds after launch.. the left wing goes.. .DLL NOT FOUND Link to comment Share on other sites More sharing options...
neufuse Veteran Posted October 25, 2013 Veteran Share Posted October 25, 2013 And now SpaceX is 3D printing the crewed Dragon's SuperDraco launch abort/landing thrusters using inconel alloy https://twitter.com/elonmusk/status/375737311641628672 that's just awesome I love industrial 3D printing Link to comment Share on other sites More sharing options...
DocM Posted October 25, 2013 Author Share Posted October 25, 2013 This is a SuperDraco on the test stand. Each crew Dragon will have 8 arranged in pairs. They do a pad abort test around the first of the year and a full-up launch abort test next summer. Link to comment Share on other sites More sharing options...
Recommended Posts