PNWDweller Posted March 24, 2014 Share Posted March 24, 2014 I know this has to be dead easy, but I haven't found any clear answer online or by looking at the car. I have seen where there are clips that hold them on on newer models but not this one. And on mine at least, the only thing I have seen is the adjustment screws for height and angle. (Or maybe those are the ones to pull the lamp out). Does anyone know how to replace the headlights on 1992 Olds Bravada? Link to comment Share on other sites More sharing options...
monknster Posted March 24, 2014 Share Posted March 24, 2014 Are you trying to replace a bulb or the actual headlight housing? Take a picture for us, will help to diagnose and give you proper advice :) Link to comment Share on other sites More sharing options...
PNWDweller Posted March 25, 2014 Author Share Posted March 25, 2014 This would be the actual light bulb and assembly. And as requested, the picture: When looking down at the light with the hood open, I can see where the connector snaps on in the back with no apparent bracket. Link to comment Share on other sites More sharing options...
rr_dRock Posted March 25, 2014 Share Posted March 25, 2014 There should be two clips on the top of the headlight, that when pulled up allow the entire unit to seperate. That may just be for new(er) than yours though (98) Link to comment Share on other sites More sharing options...
PNWDweller Posted April 12, 2014 Author Share Posted April 12, 2014 I figured it out today. Will be getting the bulbs next week. But it is different on the first gen models like mine: http://tractors.wikia.com/wiki/Oldsmobile_Bravada (SUV) (Mine is white and looks exactly like the one pictured) The front grill under the hood has several screws that you remove to expose the headlight mounts which are 4 screws each that hold the headlight with 2 for adjustment. Since this is an older model, you have to buy the entire bulb unit and not the kinds that you use now which you insert now. Gerowen 1 Share Link to comment Share on other sites More sharing options...
Fantmx Posted April 15, 2014 Share Posted April 15, 2014 They are called sealed beam headlights. Link to comment Share on other sites More sharing options...
Hum Posted April 15, 2014 Share Posted April 15, 2014 I figured it out today. Will be getting the bulbs next week. But it is different on the first gen models like mine: Make sure you do not touch the glass bulb with your hands. http://www.ehow.com/how_8244517_replace-headlight-oldsmobile-bravada.html Link to comment Share on other sites More sharing options...
PNWDweller Posted April 16, 2014 Author Share Posted April 16, 2014 I agree with this BUT, these are the sealed lamp style. Everything is enclosed in one: I just have to pull the entire unit out and then put the new one in. :) Link to comment Share on other sites More sharing options...
Recommended Posts