MLPPP - Not working PFSense


Recommended Posts

I am trying to get my MLPPP setup on Windstream, which they say they support.. I have done what it says to do in the PfSense manual, but no luck.. Any Ideas? Both Lines are up, and both get full speed.. but I can't get the combined speed.. 

post-61856-0-05433400-1402529098.png

post-61856-0-41831000-1402529099.png

Link to comment
Share on other sites

Try this

 

Delete the separate dialers pppoe0 and pppoe2

 

Make sure to save and apply all changes.

 

 

EDIT: Sorry avoid these below steps, this is for when using VLANS.

 

Create Interfaces for re0 and re2 under interface assignments.

 

Checkmark the Enable box for those interfaces under the interfaces menu at the top.

Link to comment
Share on other sites

Yes, make sure it has the proper credentials from ur ISP, then go to the interface menu at the top, wan, and there should be an apply changes button, hit that, then reboot your modems and pfsense box and test.

Link to comment
Share on other sites

They told me to use either both logins, or just one use and that it didn't matter.

Sure,

Jun 12 07:43:17 ppp: [wan_link0] MP MRRU 2048
Jun 12 07:43:17 ppp: [wan_link0] MP SHORTSEQ
Jun 12 07:43:17 ppp: [wan_link0] ENDPOINTDISC [802.1] 00 90 7f 2e 92 bf
Jun 12 07:43:18 ppp: [wan_link0] LCP: rec'd Configure Request #62 (Req-Sent)
Jun 12 07:43:18 ppp: [wan_link0] MRU 1492
Jun 12 07:43:18 ppp: [wan_link0] AUTHPROTO PAP
Jun 12 07:43:18 ppp: [wan_link0] MAGICNUM 33566594
Jun 12 07:43:18 ppp: [wan_link0] LCP: SendConfigAck #62
Jun 12 07:43:18 ppp: [wan_link0] MRU 1492
Jun 12 07:43:18 ppp: [wan_link0] AUTHPROTO PAP
Jun 12 07:43:18 ppp: [wan_link0] MAGICNUM 33566594
Jun 12 07:43:18 ppp: [wan_link0] LCP: state change Req-Sent --> Ack-Sent
Jun 12 07:43:18 ppp: [wan_link0] LCP: rec'd Configure Reject #206 (Ack-Sent)
Jun 12 07:43:18 ppp: [wan_link0] PROTOCOMP
Jun 12 07:43:18 ppp: [wan_link0] MP MRRU 2048
Jun 12 07:43:18 ppp: [wan_link0] MP SHORTSEQ
Jun 12 07:43:18 ppp: [wan_link0] ENDPOINTDISC [802.1] 00 90 7f 2e 92 bf
Jun 12 07:43:18 ppp: [wan_link0] LCP: SendConfigReq #207
Jun 12 07:43:18 ppp: [wan_link0] MRU 1492
Jun 12 07:43:18 ppp: [wan_link0] MAGICNUM 88a4c184
Jun 12 07:43:18 ppp: [wan_link0] LCP: rec'd Configure Ack #207 (Ack-Sent)
Jun 12 07:43:18 ppp: [wan_link0] MRU 1492
Jun 12 07:43:18 ppp: [wan_link0] MAGICNUM 88a4c184
Jun 12 07:43:18 ppp: [wan_link0] LCP: state change Ack-Sent --> Opened
Jun 12 07:43:18 ppp: [wan_link0] LCP: auth: peer wants PAP, I want nothing
Jun 12 07:43:18 ppp: [wan_link0] PAP: using authname "REMOVED"
Jun 12 07:43:18 ppp: [wan_link0] PAP: sending REQUEST #1 len: 21
Jun 12 07:43:18 ppp: [wan_link0] LCP: LayerUp
Jun 12 07:43:18 ppp: [wan_link0] PAP: rec'd ACK #1 len: 5
Jun 12 07:43:18 ppp: [wan_link0] LCP: authorization successful
Jun 12 07:43:18 ppp: [wan_link0] Link: Matched action 'bundle "wan" ""'
Jun 12 07:43:18 ppp: [wan_link0] Can't join bundle wan without multilink negotiated.
Jun 12 07:43:18 ppp: [wan_link0] link did not validate in bundle
Jun 12 07:43:18 ppp: [wan_link0] LCP: parameter negotiation failed
Jun 12 07:43:18 ppp: [wan_link0] LCP: state change Opened --> Stopping
Jun 12 07:43:18 ppp: [wan_link0] LCP: SendTerminateReq #208
Jun 12 07:43:18 ppp: [wan_link0] LCP: LayerDown
Jun 12 07:43:18 ppp: [wan_link0] rec'd proto IPCP during terminate phase
Jun 12 07:43:18 ppp: [wan_link0] LCP: rec'd Terminate Ack #208 (Stopping)
Jun 12 07:43:18 ppp: [wan_link0] LCP: state change Stopping --> Stopped
Jun 12 07:43:18 ppp: [wan_link0] LCP: LayerFinish
Jun 12 07:43:18 ppp: [wan_link0] PPPoE: connection closed
Jun 12 07:43:18 ppp: [wan_link0] Link: DOWN event
Jun 12 07:43:18 ppp: [wan_link0] LCP: Down event
Jun 12 07:43:18 ppp: [wan_link0] LCP: state change Stopped --> Starting
Jun 12 07:43:18 ppp: [wan_link0] LCP: LayerStart
Jun 12 07:43:18 ppp: [wan_link0] Link: reconnection attempt 5569 in 2 seconds
Jun 12 07:43:20 ppp: [wan_link0] Link: reconnection attempt 5569
Jun 12 07:43:20 ppp: [wan_link0] PPPoE: Connecting to ''
post-61856-0-04028000-1402577307.png
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.