Yusuf M. Veteran Posted June 17, 2014 Veteran Share Posted June 17, 2014 I recently bought two Gigabyte Radeon R9 280X 3GB WINDFORCE 3X OC (rev 2.0) cards from different sellers on eBay. The first R9 280X works great and I haven't come across any major issues. The second card isn't working properly. Whenever I try to play a DirectX title, the game crashes to the desktop or freezes and forces me to reboot. So far, I've tried Battlefield 4, Crysis 3 and Metro: Last Light. None of those games work and if it crashes to the desktop, I'm met with an error along the lines of "DXGI_ERROR_DEVICE_REMOVED" (Crysis 3) or "DXGI_ERROR_DEVICE_HUNG" (Battlefield 4)". I took a screenshot of both cards in GPU-Z: R9 280X #1 (works): R9 280X #2 (doesn't work): I noticed that the memory type has a different name: Elpida instead of Hynix. And the BIOS version seems to be older. Is there anything I can do try to fix the card? I've uninstalled and reinstalled my drivers properly. I even ran a driver cleaner program to remove any leftover registry entries. Also, I've ruled out my PSU after I tried it in my brother's PC. Link to comment Share on other sites More sharing options...
Scorpian8867 Posted June 17, 2014 Share Posted June 17, 2014 You can try switching to the secondary BIOS on the card. There should be a little switch next to crossfire fingers on the top. Just make sure the PC is off, or it won't take effect until you restart. Link to comment Share on other sites More sharing options...
Raa Posted June 17, 2014 Share Posted June 17, 2014 It might be worth having a look for a bios update, but be careful they have different versions for different memory types (at least Gigabyte has done this to me before with nVidia cards [recommended]). Failing that, it does sound like it's a dodgy card... Link to comment Share on other sites More sharing options...
Axel Posted June 17, 2014 Share Posted June 17, 2014 Highly likely the card was ragged for mining! Have you checked if it is overheating? Link to comment Share on other sites More sharing options...
Yusuf M. Veteran Posted June 17, 2014 Author Veteran Share Posted June 17, 2014 Thanks for the replies, guys. I really appreciate it. You can try switching to the secondary BIOS on the card. There should be a little switch next to crossfire fingers on the top. Just make sure the PC is off, or it won't take effect until you restart. Thank you! That seems to have done the trick. BIOS switch position 1: BIOS switch position 2: The difference between the two is the max voltage. It went from 1.075v to 1.200v. I swapped it out with the first card and changing the position of the switch didn't change the max voltage. I guess that's the difference between Elpida GDDR5 memory and Hynix. From what I've read online, Hynix is better. And the benchmarks I've run so far seem to prove that. I get about 2 FPS more with the Hynix card. It's not a big difference but it's also more stable. Performance seems to be more jumpy with the Elpida card. It might be worth having a look for a bios update, but be careful they have different versions for different memory types (at least Gigabyte has done this to me before with nVidia cards [recommended]). Failing that, it does sound like it's a dodgy card... That's the first thing I did after ruling out drivers and my PSU. I'm already using the latest available version for the card that didn't work (but works now with the physical BIOS switch in position 2). Highly likely the card was ragged for mining! Have you checked if it is overheating? According to the seller, the card wasn't used for more than a week. The first card was used for mining for 2-3 months and that one ran fine. As for temperatures, both cards seem to hit a max of 71C. So, any ideas as to why I can't run it at 1.075v max? If my 600W PSU is the reason, then I'll upgrade it. Link to comment Share on other sites More sharing options...
John.D Posted June 17, 2014 Share Posted June 17, 2014 Looks like that card had a few probs And here saying update the BIOS on it Link to comment Share on other sites More sharing options...
Soldiers33 Posted June 17, 2014 Share Posted June 17, 2014 Unless you doing graphic intensive stuff i dont think your cards should be heating up to that temp. Havr you tried clearing them out or perhaps getting coolers for them? I normally use thermalright coolers drop temps by at least 20 degrees. Link to comment Share on other sites More sharing options...
Raa Posted June 17, 2014 Share Posted June 17, 2014 If you've switched it to BIOS 2 and it works, but not on BIOS 1, while it works and that's great - it's definitely a faulty card. Link to comment Share on other sites More sharing options...
Yusuf M. Veteran Posted June 17, 2014 Author Veteran Share Posted June 17, 2014 Looks like that card had a few probs And here saying update the BIOS on it I saw the first link before I made this thread and it turns out, both cards have the latest BIOS. F70 for the Hynix card and F60 for the Elpida card. Unless you doing graphic intensive stuff i dont think your cards should be heating up to that temp. Havr you tried clearing them out or perhaps getting coolers for them? I normally use thermalright coolers drop temps by at least 20 degrees. The 71C temperature I mentioned was under heavy load (e.g. FurMark, Unigine Valley benchmark, etc). It's in line with what reviewers have reported. The WINDFORCE 3X cooler by Gigabyte does a good job at keeping the card cool. It's better than my friend's ASUS R9 280X DirectCU II TOP. If you've switched it to BIOS 2 and it works, but not on BIOS 1, while it works and that's great - it's definitely a faulty card. I've run a lot of tests on it and it's working fine for now. It seems to have been undervolted to 1.075v for better cryptocurrency mining efficiency. I'm wondering if there's a way to return it to 1.200v. Link to comment Share on other sites More sharing options...
n_K Posted June 17, 2014 Share Posted June 17, 2014 If it's been undervolted then they've modified the BIOS. Modifying the BIOS to something custom is really daft and could have caused other problems especially if they've not taken the different specifications of the memory etc. into consideration. Don't count on that card lasting long, it might just suddenly die completely out of the blue. Link to comment Share on other sites More sharing options...
Yusuf M. Veteran Posted June 17, 2014 Author Veteran Share Posted June 17, 2014 If it's been undervolted then they've modified the BIOS. Modifying the BIOS to something custom is really daft and could have caused other problems especially if they've not taken the different specifications of the memory etc. into consideration. Don't count on that card lasting long, it might just suddenly die completely out of the blue. I figured the BIOS was modified because I wasn't able to change the voltage with OC Guru II. Anyway, I found a solution to my problem. I re-flashed the latest BIOS for the Elipda card (F60) and it's back to a max voltage of 1.200v. It's running fine but I'm going to switch back to the Hynix card after a couple of days of gaming. If it runs fine, I'll put an ad up for it on Kijiji. At the moment, I don't need two video cards and I'd rather keep the one that performs better. Link to comment Share on other sites More sharing options...
Raa Posted June 17, 2014 Share Posted June 17, 2014 <snip> I'll put an ad up for it on Kijiji. At the moment, I don't need two video cards and I'd rather keep the one that performs better. Well then, that was a fun exercise. :laugh: Link to comment Share on other sites More sharing options...
Yusuf M. Veteran Posted June 17, 2014 Author Veteran Share Posted June 17, 2014 Well then, that was a fun exercise. :laugh: My original plan was to sell one card while keeping the seemingly newer one. After this "fun exercise", I'll most likely sell the previously-undervolted card. Raa 1 Share Link to comment Share on other sites More sharing options...
tim_s Posted June 20, 2014 Share Posted June 20, 2014 Great job everyone - seems the culprit was the librarian in the kitchen with a chainsaw. This concludes our Graphics card mystery. . . . . No ... really glad you got it sorted and I would sell the card for more than you paid and invest in another without issues. Link to comment Share on other sites More sharing options...
Recommended Posts