H100i help


Recommended Posts

So my H100i led has stopped working correctly. The blue doesn't work at all and when i finally get it working it just flickers a bit and turns off but it's there. Red and Green are fine. When i boot before the firmware kicks in the led's are white. When i get into the OS even though i set it red, it's pink since the greens always on full but there's non in corsair link.

 

If anyone can give me a fix it would be much appreciated. The blue led's still work just the firmware or something stopping it working. I could RMA to corsair but i don't want to since i don't have a box and the fans it came with are broke and ######. also means a lot of wiring and no computer for like two weeks.

 

Corsair firmware 1.0.7. Corsair Link Version 2.5.5145

Link to comment
Share on other sites

I have the exact same problem where I set mine to red but would go to pink after a reboot. What I did and what the fix is according to the forums is to set your LED settings to not all 0 or 255. I have RED set as 254 and the other 2 to 1 and 2 respectively. Now it stays on red.

Link to comment
Share on other sites

I have the exact same problem where I set mine to red but would go to pink after a reboot. What I did and what the fix is according to the forums is to set your LED settings to not all 0 or 255. I have RED set as 254 and the other 2 to 1 and 2 respectively. Now it stays on red.

Did your blue work? 

Link to comment
Share on other sites

Yeah, all 3 work fine I just tested. I remember getting this issue after updating the Link software a while back. But after reading the latest change log to the 2.7 version I found the answer. It supposedly won't get fixed until 2.8.

 

The LED issue though you're having is different, I'm assuming all 3 LEDs are fine for you. You could always down grade your firmware to 1.0.5 or re do 1.0.7?

Link to comment
Share on other sites

Yeah, all 3 work fine I just tested. I remember getting this issue after updating the Link software a while back. But after reading the latest change log to the 2.7 version I found the answer. It supposedly won't get fixed until 2.8.

 

The LED issue though you're having is different, I'm assuming all 3 LEDs are fine for you. You could always down grade your firmware to 1.0.5 or re do 1.0.7?

The issue for me is the blue doesn't work but it isn't dead since the leds are white during boot and go whatever once i've booted 

Link to comment
Share on other sites

So my H100i led has stopped working correctly. The blue doesn't work at all and when i finally get it working it just flickers a bit and turns off but it's there. Red and Green are fine. When i boot before the firmware kicks in the led's are white. When i get into the OS even though i set it red, it's pink since the greens always on full but there's non in corsair link.

 

If anyone can give me a fix it would be much appreciated. The blue led's still work just the firmware or something stopping it working. I could RMA to corsair but i don't want to since i don't have a box and the fans it came with are broke and ######. also means a lot of wiring and no computer for like two weeks.

 

Corsair firmware 1.0.7. Corsair Link Version 2.5.5145

 

Wait what? There are CPU coolers with firmware now? I'm so out of date, all I got is a fan and a lump of metal.

Link to comment
Share on other sites

Wait what? There are CPU coolers with firmware now? I'm so out of date, all I got is a fan and a lump of metal.

Corsair H100i does 

Link to comment
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.