JohnChill Posted March 19, 2015 Share Posted March 19, 2015 I'm running the Windows 10 tp build 9926 and it has been working fine. I'm trying to update to the new 10041 build. I have the Windows update advanced setting: "Choose how preview builds are installed: set to "fast". When I tell windows update to check for updates, it tells me my device is up to date. I have already updated 2 other computers from 9926 to 10041 with no problem. Has anyone else seen this issue? bpa 1 Share Link to comment Share on other sites More sharing options...
+Elі Subscriber² Posted March 19, 2015 Subscriber² Share Posted March 19, 2015 Yeah, I'm on the same boat, it seems to be a wide spread issue, I cannot see the update no matter if I'm trying to upgrade to it from either 9926 or 10036, hopefully MS fixes the issue soon or we will need to wait for the .iso when it hits the slow ring. Link to comment Share on other sites More sharing options...
Jose_49 Posted March 19, 2015 Share Posted March 19, 2015 Try erasing the Windows Update files: Go to here: C:\Windows\SoftwareDistribution\Download Delete all files. Restart PC. Try again. This will clean the Windows Update cache. Edit: Haven't tried this method yet. Had my Windows installation downloading without any problems. +Elі 1 Share Link to comment Share on other sites More sharing options...
+Elі Subscriber² Posted March 19, 2015 Subscriber² Share Posted March 19, 2015 Thanks Jose, tried that, unfortunately it didn't work for me, thanks though. Link to comment Share on other sites More sharing options...
freak180 Posted March 19, 2015 Share Posted March 19, 2015 try rebooting your pc a few times. I had this problem happen to me Link to comment Share on other sites More sharing options...
T3X4S Posted March 19, 2015 Share Posted March 19, 2015 Like freak180 mentioned, reboot a couple of times, it should pop up in the list of updates (you dont have to go into Advanced Options like before) Link to comment Share on other sites More sharing options...
SeBsZ Posted March 19, 2015 Share Posted March 19, 2015 I have been trying for 12 hours now... clicking the check for updates button every 30 minutes. Just says there are no updates available for me. I've rebooted about 15 times now, cleared the cache as above. I even reverted back to Windows 8.1 because I thought it would then upgrade directly to 10041, but it doesn't do that so I'm back on 9926. Help! Link to comment Share on other sites More sharing options...
Jose_49 Posted March 19, 2015 Share Posted March 19, 2015 I have been trying for 12 hours now... clicking the check for updates button every 30 minutes. Just says there are no updates available for me. I've rebooted about 15 times now, cleared the cache as above. I even reverted back to Windows 8.1 because I thought it would then upgrade directly to 10041, but it doesn't do that so I'm back on 9926. Help! Meh. Drags me that you haven't been able to fix your issue. Have you tried changing your Time Zone, or Location settings to US? Link to comment Share on other sites More sharing options...
Miguel Okstein Posted March 19, 2015 Share Posted March 19, 2015 Try running Windows Update in slow ring first, then change to fast and try again. This will force computer to update its status to Fast Ring for sure Link to comment Share on other sites More sharing options...
+Elі Subscriber² Posted March 19, 2015 Subscriber² Share Posted March 19, 2015 I tried switching between slow and fast ring then checking, then rebooting, then checking etc, nothing works. Link to comment Share on other sites More sharing options...
gohpep Posted March 19, 2015 Share Posted March 19, 2015 Go to HKLM\SOFTWARE\Microsoft\WindowsSelfHost\Applicability in regedit Make sure... BranchName = fbl_impressive ThresholdRiskLevel = high ThresholdInternal does not exist ThresholdOptedIn does not exist Restart your computer, check to see if you are on fast, and then check for updates. If that does not work, it is an issue from Microsoft. https://twitter.com/GabeAul/status/578384466051145728 JohnChill 1 Share Link to comment Share on other sites More sharing options...
Rickkins Posted March 19, 2015 Share Posted March 19, 2015 Oddly enough, the 'update' option from within the settings app actually worked for me, for the very first time. Seems it managed to keep most of my settings, with very little needed input needed from me afterwards. Windows update, however, no longer works, either from the app, or via the control panel.(yes, I put it back) Notifications, on the other hand, now seems to work even with uac switched off via registry. Link to comment Share on other sites More sharing options...
Night Prowler Posted March 19, 2015 Share Posted March 19, 2015 I tried switching between slow and fast ring then checking, then rebooting, then checking etc, nothing works. 1. Disconnect from the network 2. Set to Slow Ring 3. Reboot, Note: At this point you should be getting a OS change telling you to wait 4) Reboot 5) Set to Fast Ring 6) Connect network back 7) Reboot 8) Check for new updates Link to comment Share on other sites More sharing options...
+Elі Subscriber² Posted March 19, 2015 Subscriber² Share Posted March 19, 2015 Thanks, I'll try this when I get home today. Link to comment Share on other sites More sharing options...
jerzdawg Posted March 19, 2015 Share Posted March 19, 2015 Ran into this same issue on my ASUS transformer. 9926 update keeps failing when trying to install an Intel display driver so I kept thinking that was causing the 10041 build to not show. I'll also try Night Prowlers suggestion this afternoon. Link to comment Share on other sites More sharing options...
spaceelf Posted March 19, 2015 Share Posted March 19, 2015 Tried it, accomplished nothing. I assume MS will fix it eventually. Link to comment Share on other sites More sharing options...
gate1975mlm Posted March 19, 2015 Share Posted March 19, 2015 Is Windows 10 Build 10042 safe to install of should I stick with 9926? Asking because 9926 for the most part is pretty stable for me will 10042 be as stable? Link to comment Share on other sites More sharing options...
bpa Posted March 19, 2015 Share Posted March 19, 2015 Same here, any resolution? Ran into this same issue on my ASUS transformer. 9926 update keeps failing when trying to install an Intel display driver so I kept thinking that was causing the 10041 build to not show. I'll also try Night Prowlers suggestion this afternoon. I had the same issue with my graphics driver. I solved it by going to Device Manager, and uninstalling the driver and then rebooting and letting it be reinstalled. Link to comment Share on other sites More sharing options...
Hurmoth Posted March 19, 2015 Share Posted March 19, 2015 I have the same problem with a Dell notebook. I've rebooted it dozens of times now and nothing ever comes up for 10041. And yes, I've checked, I am in the Fast ring. Link to comment Share on other sites More sharing options...
McKay Posted March 19, 2015 Share Posted March 19, 2015 Same issue, have tried everything in this thread. Stuck on 9926. Ill keep trying over the next few days. Link to comment Share on other sites More sharing options...
Larry Aultman Posted March 19, 2015 Share Posted March 19, 2015 I have an Asus Tab (me400c) same issue, can't update to 10041. I also have the issue with the Intel video driver failing to install which is preventing other updates from working on 9926. I have removed the driver as suggested by bpa above and rebooted. The 10041 update is now recognized and downloading. Link to comment Share on other sites More sharing options...
NitramX9X Posted March 19, 2015 Share Posted March 19, 2015 Had the same problem as everyone in this thread, just checked for updates and it found it and started downloading, seems like they fixed the issue. Link to comment Share on other sites More sharing options...
+Elі Subscriber² Posted March 19, 2015 Subscriber² Share Posted March 19, 2015 1. Disconnect from the network 2. Set to Slow Ring 3. Reboot, Note: At this point you should be getting a OS change telling you to wait 4) Reboot 5) Set to Fast Ring 6) Connect network back 7) Reboot 8) Check for new updates Go to HKLM\SOFTWARE\Microsoft\WindowsSelfHost\Applicability in regedit Make sure... BranchName = fbl_impressive ThresholdRiskLevel = high ThresholdInternal does not exist ThresholdOptedIn does not exist Restart your computer, check to see if you are on fast, and then check for updates. If that does not work, it is an issue from Microsoft. https://twitter.com/GabeAul/status/578384466051145728 Thanks guys, tried both to no avail, it still finds no updates, I guess I'll wait for MS to fix it. Link to comment Share on other sites More sharing options...
+Warwagon MVC Posted March 19, 2015 MVC Share Posted March 19, 2015 I fixed my issue, on my tablet I was still set to the slow ring. Once I set it to fast my update arrived. Link to comment Share on other sites More sharing options...
Boo Berry Posted March 19, 2015 Share Posted March 19, 2015 No issues here with my W10 VM. Link to comment Share on other sites More sharing options...
Recommended Posts