Ridlas Posted February 23, 2010 Share Posted February 23, 2010 Intel Core 2 Quad Q9650 3.0GHZ to 3.5GHZ I should OC my GTX 260, but too lazy :/ Link to comment Share on other sites More sharing options...
Singh400 Posted February 23, 2010 Share Posted February 23, 2010 First time overclocking! :) Get yourself a copy of IBT and watch your rig implode. Near on impossible for your rig to 100% stable with that kind of OC. Link to comment Share on other sites More sharing options...
ROM3000 Posted February 24, 2010 Share Posted February 24, 2010 Get yourself a copy of IBT and watch your rig implode. Near on impossible for your rig to 100% stable with that kind of OC. Oops. Sorry for the confusion. I have C1E enabled. That's why the voltage is so low at idle. Here's a picture of CPU-Z at 100% load. Link to comment Share on other sites More sharing options...
Phenom II Posted February 24, 2010 Share Posted February 24, 2010 I can get an Unstable 4.2Ghz out of my Phenom II 965 C3 A stable 4Ghz for gaming, and a stable 3.8Ghz for P95 Link to comment Share on other sites More sharing options...
strelok1911 Posted March 14, 2010 Share Posted March 14, 2010 http://*malware domain*/show_oc.php?id=1076327 E4500 @ 3.0 GHz. Voltage is 1.425V though (in BIOS). During idle, CPUz shows 1.400V and during full load it shows 1.386V Link to comment Share on other sites More sharing options...
Phenom II Posted March 14, 2010 Share Posted March 14, 2010 Phenom II 965 BE (Stock 3.4Ghz) @ 4Ghz Link to comment Share on other sites More sharing options...
MikeFu84 Posted March 19, 2010 Share Posted March 19, 2010 Currently running i920 @ 4.0GHz. CPU-Z Before OC Temps Before OC CPU-Z After OC Temps After OC w/ Prime95 Link to comment Share on other sites More sharing options...
Phenom II Posted March 19, 2010 Share Posted March 19, 2010 Currently running i920 @ 4.0GHz. CPU-Z Before OC Temps Before OC CPU-Z After OC Temps After OC w/ Prime95 Those temps are a bit high ! Dont you have a custom cooler ? Link to comment Share on other sites More sharing options...
MikeFu84 Posted March 19, 2010 Share Posted March 19, 2010 Those temps are a bit high ! Dont you have a custom cooler ? Just installed a Noctua NH-U12P SE2 a few hours ago. Those temps were taken right after it was installed. Been watching them since and while gaming they aren't getting over 55. Link to comment Share on other sites More sharing options...
MikeFu84 Posted March 24, 2010 Share Posted March 24, 2010 Been fooling around with some settings. Have only been able to get back up to 3.8 stable with a lower core voltage which reduced temperatures by 10 degrees. Just started Prime95 up. After letting Prime95 run all night. Link to comment Share on other sites More sharing options...
qdave Posted March 24, 2010 Share Posted March 24, 2010 I'll put this in here: Link to comment Share on other sites More sharing options...
eder00 Posted March 25, 2010 Share Posted March 25, 2010 Mine...And is Super hot Here Link to comment Share on other sites More sharing options...
PENGUINwithM4A1 Posted May 29, 2010 Share Posted May 29, 2010 Phenom II x3 720BE, 2.2 stock, running at 40c idle ~55/60c loaded. Rock solid :) So happy with it. 4th core unlocked Link to comment Share on other sites More sharing options...
mjrmuppet Posted September 3, 2010 Share Posted September 3, 2010 Intel Q6600 2.4GHz @ 3.35 GHz Sensor CPU by will finely, on Flickr :laugh: on a serious note though, is this to hot? :unsure: Link to comment Share on other sites More sharing options...
MrArifPatel Posted September 19, 2010 Share Posted September 19, 2010 My first overclock, did everything go right? :p Uploaded with ImageShack.us Link to comment Share on other sites More sharing options...
mrk Reviews Posted October 6, 2010 Reviews Share Posted October 6, 2010 Finally hit 4GHz on air on my Q9550 with 8GB RAM after upping the PLL and VTT voltages. Vcore is stable, LLC enabled and I'm on an EP45-UD3P mobo which is well known for reliable and accurate voltages. True120 cooler btw with Akasa 120mm PWN fan controlled by Gigabyte ET6 software (auto mode). My room is hot anyway and my GTX460 (Asus Top edition) does pump around some heat as well. Lian-Li case btw and all my fans are set for quiet operation instead of speed, they only ramp up during gaming. Link to comment Share on other sites More sharing options...
cutecloud Posted October 7, 2010 Share Posted October 7, 2010 i7 930 + asus sabertooth temp very high...trying to look for stable 24/7 overclock. Link to comment Share on other sites More sharing options...
silv3r Posted January 16, 2011 Share Posted January 16, 2011 I have successfully managed to stabilize my first overclock, that after doing some reading. The question is: can I get more than 3GHz speed? I tried other combinations but they don't seem to get any stability at all. Some opinions would be highly appreciated! :) Link to comment Share on other sites More sharing options...
arrrgh Posted January 30, 2011 Share Posted January 30, 2011 Sandy Bridge at 4.5GHz Idling at 1.6GHz with <1V vcore Full load 3dm11 score: http://3dmark.com/3dm11/544057 Link to comment Share on other sites More sharing options...
Kryton Posted July 9, 2011 Share Posted July 9, 2011 This one is for MB ref speed, Socket 754/NF4 chipset, currently the #2 all time ref speed in the world for Socket 754 and was the previous world record. http://*malware domain*/show_oc.php?id=1044368 HWbot entry link: http://www.hwbot.org/submission/966855_bones_reference_clock_infinity_nf4x_488.18_mhz Link to comment Share on other sites More sharing options...
GollyJeeWizz Posted July 9, 2011 Share Posted July 9, 2011 Intel Pentium E2160 1.8 GHz @ 3.0 GHz Video cards I don't really believe in overclocking since the performance gain has been so minimal for me, even with a pretty significant overclock, so that's stock. XFX GeForce 8800 GT 512 MB Alpha Dog Edition. Link to comment Share on other sites More sharing options...
Arceles Posted August 1, 2011 Share Posted August 1, 2011 AMD A6 APU 3410mx... on a HP. Picture says it all. Link to comment Share on other sites More sharing options...
muratoner Posted October 1, 2011 Share Posted October 1, 2011 :| had to share this Link to comment Share on other sites More sharing options...
Pharotek Posted December 20, 2011 Share Posted December 20, 2011 With tons of help from members on this site i have finaly finished my PC build and below link is to EVGA's "Mod Rigs" site where stats and pic are posted. In order to save time and sum it up i'll list below http://www.modsrigs.com/detail.aspx?BuildID=28711 (if you click on my 3dmark Vantage score it will show added spec of my pc) i5 25k running at 4.2ghz Corsair H60 (with dual fans) 2x GTX 560 TI fermi @950 clock speed, 1900 shader, 2106 memory P67 Asrock Extreme 4 x4 G.skill ripJawsX 1866 4g stick 9.10.9.28 timing Thanks again for all your great help and information i have learned a lot from this build. Currently i'm putting togther a fully liquid cooled i7 build. Link to comment Share on other sites More sharing options...
spikey_richie Posted March 11, 2012 Share Posted March 11, 2012 Link to comment Share on other sites More sharing options...
Recommended Posts