Intel Processors Overclock Database


Recommended Posts

Here's a larger, more comprehensive online database: http://www.cpuoverclockers.com/

Seemed like we could use one of these, stealing the basic format from other overclocking databases because they work. ;) Gives users an idea of what to expect or about where everyone else's chips are.

Please list:

Processor

Stepping

Week and code (found on retail box and processor, formatted as LXXXAXXX with LXXX being week and AXXX being code) (optional)

Vcore (idle CPU-Z)

Method of cooling and make and model of cooler

Make and model of motherboard with BIOS version

OS version

RAM brand, model number, frequency (actual not effective), and latencies

All submissions must include a CPU-Z or CPUID picture or a CPU-Z validation link.

All submissions must be 8+ hours Prime95 or Orthos stable, included picture would be nice if not we'll trust you. :)

I also want to add a section for motherboards here to help shed light on what motherboards are doing what kind of front side buses. The best method of doing this is pretty much just dropping the processor multiplier and pushing the front side bus as far as the system will stay stable.

Please indicate whether or not your submission accurately portrays the maximum FSB reached by your motherboard, if not we're going to assume your submission is for the processor section only

Please post:

Processor

FSB (actual not quad pumped)

Motherboard make and model (revision number if applicable)

BIOS version

Northbridge and/or Southbridge Cooling Method

Any mods

Same thing, with CPU-Z/CPUID, but we'll accept four hours of Prime or Orthos stable.

Any submissions without any of the listed information will not be included in database

Try to keep the thread clean of the "nice oc" and "what settings did you use" posts, use another method of communication.

Also, if you made an initial post but improved on that overclock later, go ahead and repost but link to your original post. You can make multiple submissions for processors and motherboards, such as overclocks for both an E6600 and E9450. However, if you change out the motherboard, but keep the chip I'm just going to change your submission for the chip. E.g. I post my E6400 + Abit IP35-E overclock, then change the board out to an IP35-Pro. The entry will be edited to just replace the motherboard.

I'll try to make updates as often as possible, but don't expect to have your submission show up three minutes after you post. ;)

..alright, let's see how this goes. :) Go ahead and PM me if anything needs to be cleared up or if I made a mistake somewhere that should be rectified.

Unconfirmed Stability Test

Stable/Claimed to be Stable

Updated 13 February 2009 @ 1557 EST

Results:

Processors:

quadocdb.png

dualocdb.png

Motherboards:

mb.png

Edited by gwai lo
Link to comment
https://www.neowin.net/forum/topic/642085-intel-processors-overclock-database/
Share on other sites

Yeah I'm going to get around to it, I had the idea randomly in the middle of the afternoon as I was heading out. Haven't been on the computer for 15 hours else I would've added my own. I'm orthosing right now and I'll put up my 3200 MHz Orthos image by tomorrow morning. Don't have my week or code written down for some reason and I don't feel like taking the block off to check it. -_- but yes, if anyone else gets their data in before tomorrow morning 11AM PST you can be in the first update. :)

edit: Okay....yeah I'll break the ice. update coming up!

I'm posting mine ASAP....in a month that is. :p

As soon as I build my gaming rig for college I am immediatly overclocking it. As it is looking right now the setup is: Q9450, Asus P5K-E, 2x2gb, 9800GTX, 2 320gb WDC AAKS drives, etc. I can't wait to see the results.

Processor Core2Duo E6550 @ 2.8GHz

Stepping B

Revision G0

Vcore 1.232v

Method of cooling and make and model of cooler Air, Stock

Make and model of motherboard with BIOS version Asus P5K-e 1013

OS version Vista Ultimate 32bit w/SP1

RAM brand, model number, frequency (actual not effective), and latencies G.Skill, F2-6400CL4-1GBHK, 400MHz, 4-4-3-5 2T @ 2.1v

It is perfectly stable running Orthos for 8 hours, I've had it at these speeds for around 2 months and just didn't save a screenshot of it at the time because I didn't ever think I'd need one. :p It's only a minor OC, and I haven't tried to push it any farther.

cpuci1.jpg

Edited by CrashGordon

Just in case anyone is having trouble finding time to do an 8 hour ORTHOS/Prime95 stress test, here's what I do.

I just leave my computer on overnight (for one night) with ORTHOS or Prime95 on, and have it stress CPU over night.

If in the morning, the test is still going, then it's safe to assume your overclock is stable. If you get a BSOD overnight, then there might be a problem with stability.

Hope this helps.

I guess I should've added this for the Mobo list:

Processor Core2Duo E6550

FSB (actual not quad pumped) 400MHz

Motherboard make and model (revision number if applicable) Asus P5K-E

BIOS version 1013

Northbridge and/or Southbridge Cooling Method Stock

Any mods None

Use this with the other screenshots in my last post (nothing has changed)

moboun5.jpg

Processor: Q9450 @ 3200MHz

Stepping: C1

Week and code: L803B526

Vcore: 1.120V

Method of cooling: Air - Xigmatek HDT-S1283 with Artic Silver 5

Model of motherboard: ASUS Rampage Formula - BIOS 0219

OS version: Windows Vista Ultimate 64bit w/SP1

RAM: OCZ - 2x2GB - OCZ2RPR800C42G, 400MHz, 4-4-4-15 2T 2.0V

prime95pg5.jpg

Processor: Q9450 @ 3200MHz

Stepping: C1

Week and code: L803B526

Vcore: 1.120V

Method of cooling: Air - Xigmatek HDT-S1283 with Artic Silver 5

Model of motherboard: ASUS Rampage Formula - BIOS 0219

OS version: Windows Vista Ultimate 64bit w/SP1

RAM: OCZ - 2x2GB - OCZ2RPR800C42G, 400MHz, 4-4-4-15 2T 2.0V

Thanks for posting that one so much! I am planning on putting a Q9450 in my rig next month! I hoping for similar results to you, at least 3.2ghz.

I'm testing my E6550 @ 3.0GHz right now (429x7), ram is at the same FSB (x2 for DDR) with no change in timings or voltage on anything. It's looking very good so far, temps are no more than they were at 2.8 (Max. 58-59c) on the stock cooler. :yes: I'll post the results when Orthos finishes it's 8 hours or when I wake up tomorrow morning.

Processor: Intel QX9650 @ 3.4Ghz (Pretty Lame I know)

Stepping: C0

Week+Code: L739A743T

Voltage: 1.184V

Cooler: Zalman CNPS9700

Motherboard: Asus P5E Bios 0605

OS: Vista Ultimate x64

RAM: Kingston KHX9600D2K2/2G 4GB 5-5-5-15 @ 504Mhz.

CPUZ.png

Edited by Intelman
Processor: Intel QX9650 @ 3.4Ghz (Pretty Lame I know)

Stepping: C0

Week+Code: L739A743T

Voltage: 1.184V

Cooler: Zalman CNPS9700

Motherboard: Asus P5E Bios 0605

OS: Vista Ultimate x64

RAM: Kingston KHX9600D2K2/2G 4GB

CPUZ.png

How can you spend that much money on a processor and not overclock the crap out of it? :p

How can you spend that much money on a processor and not overclock the crap out of it? :p

I won it, my motherboard doesn't like high front side buses, I like an "auto" multiplier so on idle it clocks down, and I don't *need* more....yet ;)

Someday I might really try to go for more, but 3.4 sounded good.

I won it, my motherboard doesn't like high front side buses, I like an "auto" multiplier so on idle it clocks down, and I don't *need* more....yet ;)

Someday I might really try to go for more, but 3.4 sounded good.

What?!? Seems like I'm entering the wrong sweepstakes because everybody is winning hardware but me. :p

Where from?

Don't worry too much about getting a high overclock, it's not a show off thread, just information. In this case the vcore used is still information for those looking for some numbers to compare to. ;) So this is for everyone else holding off because they don't think they're clocked high enough...we just want numbers. Any of them are good.

I'll have you added by tomorrow afternoon, I have work at 6AM till 2 or 3 PM.

edit: hah I know what you're talking about. Mine aren't titration though, but stress/strain. :p

Edited by gwai lo

http://channel8.msdn.com/Posts/2019/

I tell you what, my engineering apps are f***ing fast now. Excel is much improved too, so I can do graphs with thousands of data points....I'm such a nerd.

curve.jpg

Don't worry too much about getting a high overclock, it's not a show off thread, just information. In this case the vcore used is still information for those looking for some numbers to compare to. ;) So this is for everyone else holding off because they don't think they're clocked high enough...we just want numbers. Any of them are good.

I'll have you added by tomorrow afternoon, I have work at 6AM till 2 or 3 PM.

edit: hah I know what you're talking about. Mine are titration though, but stress/strain. :p

Yeah I've done a few of those, they getting pretty bad. I think the computer took readings every 5 miliseconds when we rode bikes around campus measuring the stress/strain on the frame. I thought excel or my computer was going to die.

This thread will probably prove to be extremely useful. I guess even if the clocks aren't high, people can at least see what was "stable".

Edited by Intelman
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • UK nudity blockers are a looming privacy disaster, we must be able to see the source code by Paul Hill Image via Pexels The UK government, just like many state governments in the US and national governments around the world, has begun going on a bit of a power trip when it comes to digital safety. The major step taken so far is the introduction of the Online Safety Act, which requires users to prove their age to access adult websites (it includes more than this, too). Now, UK PM Keir Starmer is calling on Apple and Google, and presumably other mobile OS makers, to scan phones for explicit images to protect children. This potentially mandatory on-device scanning by vendor-controlled software will create unacceptable harms to individual freedoms and transparency, and introduce massive surveillance risks. In a statement on June 8, the Prime Minister stated that big tech companies, such as Apple and Google, must add features to their platforms, such as iOS and Android, that will detect and block sexually explicit or nude images involving under-18s on phones or tablets. Adults who want to take or send nudes would be required to hand over some form of identification to stop their phone from blocking these pictures, creating unnecessary privacy risks. According to the government, it wants to see these measures implemented within three months; otherwise, the government will introduce legislation to force them to introduce such technology. The legislation will include fines for companies and maybe even criminal liability for tech bosses who do not comply with the measures. In its announcement, the government said that stopping users from taking, sending, or receiving nudes without verifying their age is technically feasible, and pointed to a British firm called SafeToNet, which has made proprietary, closed-source, uninstallable software called HarmBlock and is actively selling a device with it enabled and is working with other OEMs. The fact that this software is closed source is a huge problem because it’s a black box; you do not know what it is doing on your device. The fact that it is unremovable is also a problem because you lose control of a phone that you own. Laughably, the government, just before highlighting SafeToNet, says that companies must introduce such measures “without threatening privacy or collecting any data.” It then says over-18s will still be able to view adult content by providing proof of age… Which sounds to me like data collection. SafeToNet makes some debatable claims about HarmBlock The government’s example software, HarmBlock, is a hugely alarming choice to espouse the virtues of this type of software. SafeToNet claims that HarmBlock is “ethically developed,” but this is the opposite of the truth. This black box software puts digital handcuffs on you if it’s installed in your device, taking away your freedom to control what software runs on your device, as it cannot be removed. It is not even free software, so we cannot inspect the source code to see what it is doing. For all we know, it could be acting maliciously. While that’s unlikely, we can’t verify that it’s not doing that. When Google and Apple do inevitably integrate these features on devices in the UK, they are very likely to be closed-source binaries, which will also be non-auditable. They will also have identity services built into them, which will require at least temporary collection of sensitive identity documents to verify your age. One saving grace for Android users is that this nudity blocker will very likely be implemented within the Google Play infrastructure that’s deeply tied into commercial Android devices. However, anyone with enough determination to throw out Google apps from their phone by flashing a custom ROM could find they regain control over their phone again without these digital handcuffs. Obviously, this is only how I expect Google to implement the feature; if it bakes it into the open-source Android somehow, that would be bad news for anyone looking to escape it. Outside of stripping mobile phone users of their freedom and sovereignty over their devices, these proprietary on-device machine learning or hash-matching solutions cannot be independently audited. This means that hackers could potentially exploit them because security researchers can’t investigate the code, and they could overstep their intended use case and collect even more user data without anybody knowing. We also wouldn’t know if the code is prone to detecting false positives or biased classification, because we can’t see the code. In the government’s announcement, contributing comments from the Internet Watch Foundation keep talking about “on-device protections” as if to say that users don’t need to worry about server-side processing; however, this is misleading, as data could flow from devices for the purpose of updates, remote model changes, telemetry, or server-side matching. We’ve also seen with the Online Safety Act that the government is never content with the laws it introduces; it always wants to expand the controls. If this scanning functionality arrives on devices, it might only block nudes initially, but later governments could pressure vendors for expanded access or use mandated features for other surveillance aims. The introduction of on-device scanners opens the door to massive risks in the future. Once nude blocking becomes normalized, regulators like Ofcom or politicians themselves could push for more controls over people’s devices. Very possible candidates for blocking include hate speech, misinformation, or undesirable political content. Also, there is a chance that once Apple and Google have developed this software, they might attempt to reuse the infrastructure for commercial or foreign requests, putting customers in greater danger. Just the UK's demand for this sets a precedent. What if a dictatorship decides to spy on activists by demanding that Google or Apple implement similar controls? Another concern with this scanning is that it adds compliance costs for businesses looking to get into the mobile operating system space. While Google and Apple dominate the space right now, there are lots of smaller companies creating mobile operating systems too, including community projects with very shallow pockets. How are these smaller competitors supposed to implement sophisticated nudity detectors? Simply put, they can’t. Then the government goes after them, causes them to shut down, and Google and Apple have less competition. Image via Aurora Store For us users who value sovereignty over our technology, this development will force us to seek freedom-respecting alternatives. The simplest path forward will likely be to install a custom ROM on an Android device; however, kicking Google off the phone with its black box nudity blocker could also make it harder to access apps such as banking apps, which tend to need you to pass Google's integrity checks. Thankfully, Google Play Store apps can still be obtained by storefronts such as the Aurora Store, but it just adds to the friction. To be fair to those pushing this measure to protect children, I think it will be reasonably effective, but people will still try to find ways around it, just as they’ve done with age gates on adult websites introduced under the Online Safety Act. In the effort to find circumvention methods, it could lead users to join riskier platforms that introduce new dangers. This effort also diverts resources from proven interventions such as law enforcement cooperation, targeted investigations, education, and support services to broad technical controls that have uncertain effectiveness (due to their newness). If the government is set on introducing such tools, then there ought to be safeguards in place. Any mandated code should be released as free software so that it can be audited, and the binaries should be reproducible builds so that the public knows nothing has been tampered with in the code used to create the binaries shipped out. Ideally, these tools should also be voluntary, opt-in, and even community-run. This would also allow people to have full control over their hardware while allowing parents to flip a switch to turn on these protections for children, with the knowledge that the code being run is doing exactly what it says on the tin, and nothing nefarious, like a black box solution could be doing. The government should also have a narrow legal scope where this technology stays with blocking nudes and not spreading to blocking political opinions, hate speech, and so on. Ideally, any implementation should avoid identity-linked age verification to keep user data safe, and matching should be done locally with no server telemetry to ensure it is truly on-device. While I do understand that stakeholders such as parents want to keep children safe, the potential for abuse with this type of software is colossal. It would entrench black-box surveillance and take away our freedom to use our devices as we want. There is also the acute risk that the government will demand this surveillance be expanded to block other activities, which could be particularly dangerous. If you are in the UK and don’t wish to see these measures implemented, it is still possible to write to your MP, which could lead to some better safeguards being introduced before it’s too late. Once we get more technical information about how this will be implemented, then we will be able to see if de-Googling Android devices will bypass this measure. For anyone with an iPhone, there is zero chance that you’ll be able to take off these handcuffs because Apple doesn’t let you mess with your software.
    • I'm reading the reports as EU rejecting Apple's proposal because Trusted System Agent would be an intermediary offered to third party AI's (this article is also worded as such) but Siri AI itself would not pass this intermediary. This would cause a situation where Siri AI would have more direct system access and offer it an unfair advantage. (speaking from EU regulator perspective here) Apple is citing security issues with doing what EU asked for, and I think this also supports this theory, because truly direct system access like Siri AI would make it impossible to control third party AI's running on the devices and e.g. reign them in via adjustments to Trusted System Agent. So, I _think_ this is the sticking point right now: EU saying they need to be on equal footing as Siri AI, Apple saying they can't be because Apple only trusts their own AI. Apple could of course be leaning a bit extra hard towards this because they're biased in terms of excluding competitors. One method to find an agreement would be to have Siri AI also run through Trusted System Agent and treat it as untrusted. This kind of defensive architecture design (especially when involving an AI) would honestly not be a very bad idea from a sheer engineering standpoint. But then Apple would need to swallow their pride and adapt worldwide due to EU, and make perhaps major updates delaying Siri AI once more.
    • I have not even heard of that game. will take a look
    • Chasys Photo 5.41.01 by Razvan Serea Chasys Photo is a suite of image editing applications including a layer-based image editor with adjustment layers, linked layers, timeline and frame-based animation, icon editing, image stacking and comprehensive plug-in support (Chasys Photo Editor), a fast image viewer (Chasys Photo Viewer) and a fast multi-threaded image file converter (Chasys Photo Converter) , with RAW image support in all components. It supports the native file formats of several competitors including Adobe Photoshop, Affinity Photo, ArtWeaver, Corel PhotoPaint, FireAlpaca, GIMP, Krita, Paint.NET, PaintShop Pro and Pixlr, and the whole suite is designed to make effective use of multi-core processors, touch-screens and pen-input devices. Designed under the mantra of “unique, flexible and powerful”, Chasys Photo takes a radically different approach to image editing with the aim of opening up new possibilities for those who dare to be different. Chasys Photo key features: Free-style layering with blending modes Adjustment layers with multiple adjustments per layer Linked layers (a.k.a Linked Smart Objects) Composite, Image List, Frame Animation and Object Animation image modes Animation, both frame-based and object-based (timeline animation) Animation Composer engine Image Stacking for noise reduction, super-resolution, etc. Tablet/Pen-input/Stylus support with pressure control Touch-screen support with gestures including pitch-to-zoom and multi-finger panning Support for the native formats of Adobe Photoshop, Affinity Photo, ArtWeaver, Corel PhotoPaint, FireAlpaca, GIMP, Krita, Paint.NET, PaintShop Pro and Pixlr Support for common formats such as JPEG, animated PNG, animated GIF, TIFF, PICT, WebP, HEIF, DDS, JPEG-2000, JPEG-XR, JPEG-XL, AVI video, etc. Support for the OpenRaster interchange file format and rare formats such as QOI, MNG/JNG and DPX Support for older formats such as PPM/PGM/PBM, PCX/DCX, PCD, TGA, COKE, etc. Comprehensive Camera RAW file support with live adjustment Extensive plug-in support with streamlined SDKs Support for Photoshop Filter Plug-ins (.8BF) Advanced printing and scanning engines PDF document generation Icon and cursor editing, import and export, including Vista-style and Mac-OS icons Screen Capture, including Video Screen Capture with multiple triggering modes Video capture from devices (e.g. TV/Video) Supports multi-core processors, High-DPI displays and Multiple Display setups Integrated File Browser, Bluetooth OBEX and in-built utilities (Calculator, Notepad) Shell integration with thumbnails and conflict detection Unlimited Undo/Redo and Asynchronous Auto-Save, with Just-in-time memory compression to save space Fully re-editable text with advanced styling and effects (TextArt) Full alpha channel through out the workflow with Alpha protection (a.k.a. transparency protection) Multiple language support with user-editable language files and translation assistant (Chasys Photo Language Studio) Anti-aliasing and super-sampling support in tools and paths* Smart-resizing (similar to seam-carving) Best-in-class post-edit heuristics anti-aliasing engine Physical measurement specification with display size detection via EDID Uses the latest CD5 specification with animation and multi-resolution Super-fast internal graphics engine (JpDRAW2) Full UNICODE support in all components Metadata save, restore and scale to imitate vector art Configurable Guides and Grids with Snap-to-Grid Smart-dither to custom palette Asynchronous preview rendering engine Pantone equivalent palettes for PMS 100 to 814-2x Automatic color naming ... and many more! Chasys Photo 5.41.01 changelog: New Features Layered images with multiple pages (Composite/Multi-page) Additional templates to support template-centric workflow New Layer Blend Mode: Inverse Luma Mask Horizon detection in Rotate Transform Cropping option when importing video Orientation options in QR Code Generator plug-in Solved angle ambiguities (CCW versus CW) Internal Improvements Improved graphics engine (JpDRAW2™ v26.05) Improved CD5 codec (v4.10, improved ACSC compression) Improved interpolation when downsizing images Improved motion detection in Video Capture Slightly lower memory usage (RAM is getting expensive!) File Support and Bug Fixes Improved PXZ file support (placeholders, blanks) [bug-fix] Memory leak in flt_JPEG.dll Download: Chasys Photo 5.41.01 | 46.1 MB (Freeware) View: Chasys Photo Home Page | Wikipedia Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      220
    3. 3
      ATLien_0
      92
    4. 4
      +Edouard
      90
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!