Windows 7 BSOD


Recommended Posts

Infernoprince

Hi all,

I'm running windows 7 x64.

The BSOD occured after I used a program called driver hub to update my drivers. It was going well, however after attempting to download a driver (I believe it had to do with a USB driver but I can't confirm) my computer shutdown. I restarted the computer and tried to reinstall the driver, I also got a prompt to update windows so I did that as well. My computer shutdown again but this time it loaded into a BSOD.

I've tried to boot into safe mode and it starts loading drivers but then stops and shuts down. I tried to use last know good configuration but that didn't work either. I tried to load into automatic repair mode but that didn't work, and system restore doesn't work either. I do however have access to command prompt, windows memory diagnostics, and system image recovery (although it says windows cannot find a system image on this computer)

Technical Information on blue screen:

*** STOP: 0x0000007E (0xFFFFFFFF80000003, 0xFFFFF8800194A02D, 0xFFFFF880009A9468, 0xFFFFF880009A8CD0)

*** asstahci64.sys - Address FFFFF8800194A02D base at FFFFF88001934000, Datestamp 599a919f
------------------------------------------------------------
Information from startup repair
Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21198527
Problem Signature 05: AutoFailover
Problem Signature 06: 11
Problem Signature 07: 0x1000007e
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

---------------------------------------------------
Diagnosis and repair details:
---------------------------------------------------
Root cause found:
---------------------------------------------------
Unknown Bugcheck: Bugcheck 1000007e. Parameters = 0xffffffff80000003, 0xfffff8800ad8502d, 0xfffff880033dfec8, 0xfffff880033df730.

Repair action: System files integrity check and repair
Result: Failed. Error code = 0x490
Time taken = 136422 ms
---------------------------------------------------
Session details
---------------------------------------------------
System Disk = \Device\Harddisk0
Windows directory = D:\Windows
AutoChk Run = no
Number of root causes = 1

Ask me if you need any other information.

Link to post
Share on other sites
+warwagon

 asstahci64.sys is for a Asmedia 106x SATA Host Controller Driver. So either the driver is bad or your hard drive / sata device has bad sectors or something throwing a controller error.

 

If possible download the portable version of this and see if you can run it from the command line off a flash drive to check the health of your hard drive.

 

https://crystalmark.info/en/software/crystaldiskinfo/

 

It's also possible that your sata mode in your bios got switched from AHCI or raid to IDE or vice versa. So go into your bios setup and see what your sata mode is set to. It's possible your bios may have reset it self after a power outage due to a dead CMOS battery.

 

  • Like 2
Link to post
Share on other sites
goretsky

Hello,

 

Have you entered into the computer's BIOS settings and see if the drive type accidentally changed from SATA to IDE, or vice-versa?

 

Regards,

 

Aryeh Goretsky

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Sszecret
      Microsoft Weekly: New Surface devices, April Patch Tuesday, and game updates
      by Florin Bodnarescu



      In the last seven days, Microsoft unveiled its latest Surface Laptop (and a number of other peripherals), acquired Nuance Communications for a cool $19.7 billion, and even pushed out a number of updates for Windows and first-party games. You can find info about that, as well as much more below, in your Microsoft digest for the week of April 11 - 17.

      New Surface devices


      After a number of leaks, and even a teaser video from Microsoft itself, the fourth iteration of the Surface Laptop was unveiled earlier this week.

      Swapping out the Cobalt Blue variant for an Ice Blue color, the Laptop 4 now also includes AMD CPUs for both its 13.5 and 15-inch models (namely the Ryzen 4000 generation), as well as 11th-gen Intel Core CPUs. The device starts at $999, and has begun shipping since April 15, and in case you want to check out the full range of options available, have a look here.

      The company also unveiled a number of peripherals, including the Surface Headphones 2+ for business (priced at $299 and available later this month), and the Modern USB Headset and Modern Wireless Headset, priced at $49.99 and $99.99 – arriving in June. Also arriving in June are the Modern USB-C Speaker ($99.99) and the Modern Webcam, the latter of which supports 1080p 30FPS video output, has a 78-degree FOV, and is priced at $69.99.

      Last but not least, the Surface Duo was also mentioned, with Microsoft confirming that it’s headed for more European markets. Specifically, it’ll be available in Austria, Belgium, Denmark, Finland, Ireland, Italy, The Netherlands, Sweden, and Switzerland, though only for business and education customers.

      April Patch Tuesday


      Since this week was the second Tuesday of the month, Microsoft pushed out its by now traditional set of Patch Tuesday updates. If you’re on Windows 10, these are:

      May 2020 Update / October 2020 Update (2004, 20H2): KB5001330, builds 19041.928 / 19042.928 – contains updates that improve basic Windows operation secuirity, as well as enhance security when using input devices like mice, keyboards, or pens. November 2019 Update (1909): KB5001337, build 18363.1500 – changelog is identical to the version above. October 2018 Update (1809): KB5001342, build 17763.1879 – supported for Enterprise, Education SKUs. April 2018 Update (1803): KB5001339, build 17134.2145 – supported for Enterprise, Education SKUs. Anniversary Update (1607): KB5001347, build 14393.4350 – supported in the Long-Term Servicing Channel. Windows 10 RTM (1507): KB5001340, build 10240.18906 - supported in the Long-Term Servicing Channel. Windows 8.1 and 7 aren’t forgotten either, with the former still in extended support until 2023, and the latter being kept alive in the business environment via Extended Security Updates. As such, here’s what folks running those operating systems need to be on the lookout for:

      Windows 8.1: KB5001382, KB5001393 (security-only) – this monthly rollup includes some time zone and security enhancements, while still containing the now traditional Cluster Shared Volume error „STATUS_BAD_IMPERSONATION_LEVEL (0xC00000A5)” in terms of known issues. Windows 7: KB5001335, KB5001392 (security-only) – contains similar time zone and security enhancements to Windows 8.1, and has the identical known issue. Naturally, beyond the regular updates, Insiders in the Dev channel also got a new build to play with, namely 21359. Beyond its laundry list of fixes, it introduces a brand new option in the Power menu, which allows the system to restart your apps after signing in. Essentially, this works in a similar way to the ability to recover the last session in browsers, only this one applies to open apps at the time of restarting the system.

      For fans of Timeline - the feature in Windows 10 that allows you to view your activity history (more or less a giant “recent files” screen -, there is some bad news. While the capability will remain functional for local activity, cross-device syncing is being removed.

      Finally, in case the rumored Sun Valley UI refresh has piqued your interest, check out this concept which brings File Explorer a little more in-line with the Redmond giant’s vision. Sure, Windows 10 may never look like this, but it’s a fun little bit of speculation if you will, at least until Sun Valley arrives via 21H2 later in the year (assuming there’s no delays).

      Game updates
      This week was all about game updates on the Microsoft side.



      On one hand, World Update IV dropped for Flight Simulator, featuring enhancements to the scenery in Western Europe. Included in the update are enhancements to regions in France, Belgium, the Netherlands, and Luxembourg, covering cities, airports, landmarks, and much more.

      Sea of Thieves players were also greeted by the start of Season Two, adding Trade Routes, the ability to purchase resources directly from outposts, the addition of 100 more unlockable items to the free battle pass, and so much more.

      For folks eagerly awaiting the Caves & Cliffs update that’s coming to Minecraft, there’s some interesting news. Mojang Studios has decided to split the update in two, with the mobs, items, and blocks arriving in the summer (the original target of the bigger update), and the world generation upgrades landing during the holiday season.

      Those who enjoyed InXile’s latest release, Wasteland 3, will be happy to hear that the game is in fact getting its first expansion, The Battle of Steeltown. Adding a new location, new mechanics, more enemies, weapons, armor, combat and gear scaling and more, the expansion drops June 3 across Steam, GOG, Xbox One, PlayStation 4 and (now) current-gen consoles for $13.99. Game Pass subscribers get at 10% discount when purchasing the expansion.

      And while we’re on the subject of Game Pass and deals, you are now able to download Game Pass games using Amazon Alexa, while the ever-present Deals with Gold are yet again out in full force with The Division, ABZU, Apex Legends, Battlefield 1, and more receiving respectable discounts.

      Last, but most certainly not least, if you’re an Xbox Live Gold subscriber, Uprising and Truck Racing Championship are now free to claim, with Vikings: Wolves of Midgard still being available to grab as well, at least until April 30.

      Dev channel
      Edge is set to get a new Workspaces feature, now available in the Canary channel. Additionally, Edge Dev build 91.0.852.0 is now out, adding Password Monitor for everybody, while the stable channel has gotten version 90, and the Canary variant on Android has received an update too. Chat bubble support is planned for Teams, as is support for electronically-signed approvals. All major Microsoft services will exclusively use SHA-2 starting next month. PowerToys pre-release v0.36 is now out, with a video conference mute tool. The Remote Desktop app has been updated with support for Apple Silicon devices. Logging off
      We end the column with some Exchange, acquisition, and podcast news.



      We’ll begin with Exchange, as Microsoft has released yet another set of security updates for the ever-unfolding Exchange Server vulnerabilities. This latest round of patches comes as a result of an NSA report and, for those not aware, is meant to further protect against the state-sponsored group attacks on on-prem Exchange Server instances, which started surfacing last month.

      Moving on to acquisition news, Microsoft was rumored to be in talks with Nuance Communications, the company behind the underlying technology for Apple’s Siri digital assistant for a buyout. The firm's speech recognition system, Dragon, is used in a number of fields including healthcare, legal, law enforcement, and financial services.

      While the initial rumor pinned the sum of the buyout at $16 billion, the Redmond giant came out not long after to confirm that it was indeed acquiring Nuance, but for $19.7 billion. This is because it’s also taking on the firm’s debt.

      Last but not least, feel free to check out the latest episode of the Neowin Podcast, in which Rich and Joao discuss the shuttering of LG’s phone business, what’s next for Windows 10, and indeed what’s next for Rich Woods, as he will be leaving Neowin. You can check out the podcast at this link.

      Missed any of the previous columns? Be sure to have a look right here.



      If you’d like to get a daily digest of news from Neowin, we now have a Newsletter you can sign up to either via the ‘Get our newsletter’ widget in the sidebar, or this link.

    • By indospot
      Patch Tuesday: Here's what's new for Windows 7 and 8.1
      by João Carrasqueira

      Today is the second Tuesday of April, and with it, Microsoft is once again releasing new updates for all supported versions of Windows, including Windows 10, Windows 8.1, and Windows 7 - as long as you're a business paying for extended security updates.

      As usual, there are two types of updates for both Windows 8.1 and Windows 7, as well as their server counterparts - a monthly rollup that's usually installed automatically and a security-only update that you have to install manually.

      Starting with Windows 8.1, the monthly rollup update is KB5001382 and you can download it manually here. It includes the following changes:

      There's nothing new in terms of known issues, but the one we've been saying for a while now is still here:

      Symptom Workaround Certain operations, such as rename, that you perform on files or folders that are on a Cluster Shared Volume (CSV) may fail with the error, “STATUS_BAD_IMPERSONATION_LEVEL (0xC00000A5)”. This occurs when you perform the operation on a CSV owner node from a process that doesn’t have administrator privilege. Do one of the following:

      Perform the operation from a process that has administrator privilege. Perform the operation from a node that doesn’t have CSV ownership. Microsoft is working on a resolution and will provide an update in an upcoming release.

      As for the security-only update, that's labeled KB5001393 and you can download it manually here. It only includes the following:

      It has the same known issue as the monthly rollup.

      Moving on to Windows 7, the monthly rollup update is KB5001335 and you can download it manually here. It includes the following changes:

      It has the same known issue as the updates above.

      Finally, the security-only update for Windows 7 is KB5001392 and you can download it manually here. It also has the same known issue as the other updates, and includes these changes:

      As a reminder, only select users are eligible to get updates for Windows 7, since it's no longer supported for the general public. Also, as mentioned at the start, the monthly rollup updates will generally install automatically over time, but you can install them manually if you prefer. The security-only updates can only be installed manually using the links above.

    • By hellowalkman
      Microsoft releases additional updates to resolve some more printer problems
      by Sayan Sen



      Microsoft's Patch Tuesday update for March, which was released on the 9th of the month, introduced several printer-related problems, including in some cases a Blue Screen of Death (BSOD), when trying to print as a result of driver conflicts. The company was quick to acknowledge the issues and also provided a temporary workaround for the problem. A few days later on March 15, Microsoft released an official out-of-band cumulative update to fix the issues causing such BSODs.

      Today, the firm is releasing more such updates related to printers, although this time these updates are meant to resolve problems and errors related to printing graphical content and such, which were potentially also introduced with the March 9 Patch Tuesday update.

      Here's how Microsoft describes the newly identified problem:

      The updates should be available - as optional - to users on Windows 10 versions 1507, 1607, 1803, 1809, 1909, 2004, 20H2, and Insiders on 21H1, but Microsoft recommends you to proceed with the update only if you're affected by the problem. The list of updates with their corresponding compatible Windows version is given below:

      Microsoft says that more updates for the remaining affected versions of Windows will also be releasing very soon. To update, you can either go to the Windows settings' Update & Security section and look for the optional updates, or you can also visit the Windows Update Catalog website and download the particular update version compatible with your OS version.

    • By Rich Woods
      Microsoft issues a fix for Patch Tuesday printer crashes
      by Rich Woods



      As always, Microsoft released new updated for all supported versions of Windows 10 on the second Tuesday of the month, a day affectionately referred to as Patch Tuesday. Unfortunately, these updates ended up being problematic in a big way, causing a bug that left users with a blue screen of death (BSOD) when they tried to use a printer.

      After offering a temporary workaround over the weekend, the fix is now here in the form of an out-of-band cumulative update. In these updates, there is just one fix, which "addresses an issue that might cause a blue screen when attempting to print to certain printers using some apps and might generate the error, APC_INDEX_MISMATCH." In other words, this update is pretty straightforward.

      It should be available for anyone affected - specifically those on Windows 10 versions 1803, 1809, 1909, 2004, 20H2, and Insiders on 21H1 - but it's not going to be installed automatically. If you go to Windows Update and check for updates, you'll see that there's a new optional update, which will look just like a C week update. That's the one that you'll need to fix the issue.

      The regular C and D week updates will arrive later on this month, and Microsoft has already said that those are going to remove the old Edge browser, so we know they're coming. Any future cumulative updates will also include this fix.

    • By Sszecret
      Microsoft Weekly: Patch Tuesday woes, Bethesda now with XGS, and no more old Edge
      by Florin Bodnarescu



      A bit of a printer mishap with Patch Tuesday, the ZeniMax acquisition now being official, and a farewell to Legacy Edge were all things that happened this week. You can find info about that, as well as much more below, in your Microsoft digest for the week of March 7 – 13.

      Patch Tuesday woes


      To the surprise of perhaps very few, Microsoft pushed out the main set of security updates to its supported variants of Windows right on cue, on the second Tuesday of the month. If you’re on a Windows 10 system, these updates are:

      May 2020 Update / October 2020 Update (2004/20H2): KB5000802, builds 19041.867/19042.867; Known issue: The same user and system certificate bug that’s been plaguing these versions for a while; November 2019 Update (1909): KB5000808, build 18363.1440; Known issue: Same as the versions above; October 2018 Update (1809): KB5000822, build 17763.1817 – supported for Enterprise and Educations SKUs; April 2018 Update (1803): KB5000809, build 17134.2087 – supported for Enterprise and Educations SKUs; Creators Update (1703): KB5000812, build 15063.2679 – supported for the original Surface Hub; Anniversary Update (1607): KB5000803, build 14393.4283 – supported in the Long-Term Servicing Branch; Windows 10 RTM (1507): KB5000807, build 10240.18874 - supported in the Long-Term Servicing Branch; It’s worth keeping in mind that for versions 20H2, 2004, 1909, 1809, and 1803 – so the supported feature updates for the years 2018, 2019, and 2020 -, you may experience an APC_INDEX_MISMATCH bugcheck (BSOD) when trying to use printers. Microsoft is aware of this issue and has provided a temporary workaround achieved via the Print Management console, though it is working on a more permanent fix.

      Windows 8.1 and Windows 7 are still supported too – if you pay for Extended Security Updates in the case of the latter -, so here’s what folks on those systems need to be on the lookout for:

      Windows 8.1: KB5000848, KB5000853 (security-only) – addresses a range of security vulnerabilities, including CVE-2020-17049 and CVE-2021-1640. Known issue: The same “STATUS_BAD_IMPERSONATION_LEVEL (0xC0000A5)” error that’s been there for months. Windows 7 SP1: KB5000841, KB5000851 – includes broadly the same fixes as the Windows 8.1 set up updates. Known issue: Identical to the one in Windows 8.1. That’s not to say that Patch Tuesday updates were the only things Microsoft released this week. There was also build 21327.1010 which landed in the Dev channel carrying no changes, and build 21332, whose claim to fame is that it removes 3D Viewer and Paint 3D on clean installs, much to the chagrin of the three folks out there that were using them. The apps aren’t going away, they just won’t be included with Windows by default anymore when you clean install the OS.

      The build does contain a fair few fixes, but as you’d expect, also a number of known issues. That bug that sees the update process hang for extended periods of time is unfortunately still there.

      To end the section on a high note, the company also released ISOs for the 21H1 preview version, namely build 19043 from the Beta channel. This is for those of you who would like to clean install the preview build for one reason or another.

      Bethesda now with XGS


      Earlier in the week, the EU gave the go-ahead for Microsoft’s acquisition of Bethesda parent company ZeniMax Media. Initially announced on September 21, the day before Xbox Series S and X pre-orders went live, the $7.5 billion acquisition was subject to regulatory approval before being finalized. That was all wrapped up this week, with the SEC in the U.S. providing its approval on March 5.

      As a result, the two companies hosted a roundtable event, where it was revealed that Game Pass would be gaining 20 Bethesda games – some of which will take advantage of FPS Boost -, and that future Bethesda titles (outside of existing contractual obligations) will be exclusive to platforms with Xbox Game Pass. In other words, going forward, you’ll see those titles on Xbox consoles, PC, on mobile devices via xCloud streaming, and any other platform that will allow Microsoft to push Game Pass. At this point, there’s a higher chance of hell freezing over than Game Pass landing on PlayStation, but weirder things have happened before.

      It's also worth highlighting some other gaming news, such as the arrival of Forza Horizon 4 on Steam with Xbox cross-play (but not cross-save), the announcement that The Outer Worlds’ second story expansion, Murder on Eridanos will be available March 17, and that language labels have now been added to Xbox games on the Microsoft Store.

      As always, there are a number of Deals with Gold to peruse for those looking to expand their library but don’t want to pay full-price for games.

      No more old Edge


      It’s no use dancing around the subject, ye olde Edge of 2015, otherwise known under it original codename of Project Spartan, is now no longer supported. As our very own Rich Woods has dubbed it, Dedge, due to being supplanted by the Chromium-based version - initially announced in 2018 and reached GA in 2020 – is now for all intents and purposes dead.

      While EdgeHTML and Legacy Edge themselves are ending, support for WebView is not, and in fact has been enhanced via WebView2, supported in the latest variant of the browser. To draw a line in the sand, Microsoft will be removing Legacy Edge from Windows 10 systems with the April Patch Tuesday set of updates, provided you’re on version 1803 or newer. What’ll happen with 1607 and 1507 from the Long-Term Servicing Branches is as of yet unclear.

      The firm isn’t waiting until April to move forward on certain platforms though, as Chromium Edge is starting to get rolled out to folks on Xbox, and the macOS version is ditching AutoUpdate in favor of the much more sane – and speedy – implementation that’s currently found on Windows.

      Edge Dev 90.0.818.0 is also out, allowing folks to sort Collections, adding an option to disable the Dev Mode extensions popup, and more. Though coming later this year in version 92, Microsoft will also allow folks to sync the payment information across all signed-in devices, a feature set to debut after the ability to scan the Clipboard for relevant info, bulk password delete support, the expansion of the history search function, and more PDF improvements.

      And finally, Microsoft has decided that four distinct channels really weren’t enough, so there’s now a fifth one. From most to least frequently updated we have Canary, Dev, Beta, and Stable, and joining the roster is now an Extended Stable channel.

      All Chromium-browsers are set to adopt the four-week release schedule as outlined by Google, but the Extended Stable channel on Microsoft’s side is aimed at business, and will be updated every eight weeks. In essence, business customers will receive every other update and biweekly security updates.

      Dev channel
      New firmware updates have been pushed out to the Surface Go and Laptop Go, with the Intel-powered Surface Laptop 3 getting some driver updates. In terms of new hardware, Microsoft is rumored to announce the Laptop 4 with last-gen Ryzen chips and current-gen Intel chips, as well as a new webcam this spring. For the few folks that were using it, the Cortana functionality in the Invoke speaker has now been removed. Dark mode for the unified Office app on Android is in the works, while Whiteboard is now in preview on the platform, but not for personal accounts. On the other end of the spectrum, the Microsoft Store for Business and Education may be killed off soon, while the company’s UserVoice feedback pages have already gone the way of the Dodo. Microsoft and Intel are collaborating with DARPA to help out with the Data Protection In Virtual Environments encryption project (otherwise known as DPRIVE), while the former has expanded its AccountGuard features to high-risk entities in 31 countries. Logging off
      We end with a bit of news concerning the ongoing Exchange kerfuffle and some Microsoft event dates.



      Let’s begin with the event dates, as a new video from leakster WalkingCat has seemingly revealed the dates for some of the company’s upcoming virtual gatherings. For one, there’s one that already happened, the March 2-4, 2021 variant of Ignite, then in chronological order Build (May 25-27), Ready (July 21-22) and finally, the fall version of Ignite (October 13-14).

      The fact that the Build dates are listed as May 25-57, as well as the fact that fall Ignite is only two days have led to some folks speculating that these are merely placeholder dates. We’ll found out more in due time.

      And speaking of time, Microsoft thought it was the time to release an advisory regarding the ongoing Exchange vulnerabilities.

      For those not aware, this is concerning Exchange on-premises servers and there are numerous attacks taking place via exploitation of four vulnerabilities, either from state-sponsored groups or other bad actors.

      Some reports state that over 30,000 organizations in the U.S. are affected, with Microsoft stating that of the 400,000 servers the company investigated on March 1, 300,000 had been patched by March 9, and that number rose to 318,000 only two days later. That still left around 82,000 exposed, but nevertheless, it’s still an impressive number to have patched in that short a time frame.

      The Redmond giant is continuing to release patches and updates to its relevant blog posts, as well as guiding folks to make use of the CISA (Cybersecurity and Infrastructure Security Agency) guidance.

      Missed any of the previous columns? Be sure to have a look right here.