Recommended Posts

If by installing you mean extracting them to c:windows/fonts, then yes that was the first thing I did actually :s

I think you have to actually right click on them and click install, rather than just copying them to the fonts folder. I'm not sure the effect is the same.

I think you have to actually right click on them and click install, rather than just copying them to the fonts folder. I'm not sure the effect is the same.

:blush:

Hmmm. Strange everyone else that's having those issues didn't have the fonts installed.

No need for sarcasm mate!

Ok goint to try what Vizion said, right click installing

Thanks vizion! installing the font worked!

You're very welcome. Glad you fixed it :)

ah cr*p just noticed buttons are missing...

I've not read all the other posts above. I'm guessing if the buttons are missing its an images problem though. Have you made sure you've followed the readme to the letter and extracted them to the correct place?

No need for sarcasm mate!

Wasn't meant to be sarcastic. I forgot a question mark.

Meant to say:

Hmmm. Strange? Everyone else that's having those issues didn't have the fonts installed.

:D

Wasn't meant to be sarcastic. I forgot a question mark.

Meant to say:

Hmmm. Strange? Everyone else that's having those issues didn't have the fonts installed.

:D

Haha I saw the same thing happen to someone else in another thread a little while ago. Sometimes a little punctuation completely changes the way the sentence is read :p

be sure that foo_exvar.dll is in your foobar2000/components/ folder, this is the component that point to the images folder which MUST be : .../foobar2000/images/kameleon/

check your install (paths) and feel free to read the documentation on http://br3tt.online.fr/html/K/index.htm

Wasn't meant to be sarcastic. I forgot a question mark.

Meant to say:

Hmmm. Strange? Everyone else that's having those issues didn't have the fonts installed.

:D

Oh I though you were just being rude :s No Worries!

Haha I saw the same thing happen to someone else in another thread a little while ago. Sometimes a little punctuation completely changes the way the sentence is read :p

:s

be sure that foo_exvar.dll is in your foobar2000/components/ folder, this is the component that point to the images folder which MUST be : .../foobar2000/images/kameleon/

check your install (paths) and feel free to read the documentation on http://br3tt.online.fr/html/K/index.htm

I did the whole thing again,exvax is there, still no images, this is how my image folder look like:

C:\Program Files\foobar2000\images\kameleon

Still using it like that anyways :p

  • 2 weeks later...
I have been trying to use Foobar for a while but I always give up. My main issue is Tags. I use iTunes and all my mp3s are tagged through that. Whenever I have tried Foobar it reads the tags incorrectly. Is it possible to have Foobar read the tags just as iTunes does?

Don't know if you or anyone still cares, but there is a id3v2 compatibility mode in the advanced tagging options. I don't know if it applies to both writing and reading, or just the writing of tags. However, it may be worth a shot. And to be fair, itunes is the one that doesn't write/read tags properly.

be sure that foo_exvar.dll is in your foobar2000/components/ folder, this is the component that point to the images folder which MUST be : .../foobar2000/images/kameleon/

check your install (paths) and feel free to read the documentation on http://br3tt.online.fr/html/K/index.htm

Hey Brett, love the theme and to be honest, Ive tried foobar2k before and never got on with it cos I could never get the themes to work.

Since I saw this thread yesterday, Im now using your skin and foobar2000 works very fast, looks fantastic and amazingly customizeable from the UI you made. Im figuring out what you can do in there bit by bit, but there is one thing missing.

Most of my tracks are tagged so they have multiple artists - example the Gorillaz CD has many different artists stored in the artist field as well as "Gorillaz", depending on the track. Because of this, the song list that shows up when you select the whole album is split up, grouping the same sets of artists together. It looks fugly and doesnt play in order correctly. Is there any way I can mod the list setup to order by Album Artist instead of Artist? All of my library is organised based on this field, not the Artist field.

Ive read through the documentation but its pretty long and Im a bit of a n00b on foobar, and cant really see anything in there about this.

Any thoughts?

well, my foobar used to look decent sometimes but, because it stays all day long hidden in the taskbar and I only use my keyboard, I thought I can settle with something simple.

i have to admit it used to look better with a dark theme...

foobarsimplyblack.jpg

I need help tagging my Mp3 files properly cause when i add albums in foobar i found that they are separated in 2 or 3 places instead of one but when i open them in Mp3Tag i can`t find a problem ? , also how can i group single different files in foobar as if they are one album ?

I just started using Foobar2000 on my PC (used to use iTunes on PC and Mac but PC blows). I know this is a dumb question that was probably answered on one of the 500+ pages but how do i make the album art show up. I downloaded an album art image and put it in the folder and it doesn't pick it up. Also i downloaded dBpowerAMP to edit the tag and assigned it the image file but still not working. Is there something i am missing? Sorry again for the noob question

post-26431-1242147337_thumb.jpg

I dont thing the playlist used on that skin reads embedded art, retarded but all too common on Foobar skins. It's most likely looking for "folder.jpeg" in the track's directory, so make sure your images are named as such.

Otherwise....

Right click on the playlist and select "Settings". Click on the "Field Definition" tab, double click "_ART.COVER_" then replace the existing string with the following,

$if3($findfile($replace(%path%,%filename_ext%,%directoryname%.jpg)),$findfile($replace(%path%,%filename_ext%,%directoryname%.png)),$findfile($replace(%path%,%filename_ext%,%directoryname%.gif)),$findfile($replace(%path%,%filename_ext%,folder.jpg)),$findfile($replace(%path%,%filename_ext%,folder.png)),$findfile($replace(%path%,%filename_ext%,folder.gif)),$findfile($replace(%path%,%filename_ext%,*.jpg)),$findfile($replace(%path%,%filename_ext%,*.png)),$findfile($replace(%path%,%filename_ext%,*.gif)),$findfile($replace(%path%,%directory%\%filename_ext%,*.jpg))$findfile($replace(%path%,%directory%\%filename_ext%,*.png))$findfile($replace(%path%,%directory%\%filename_ext%,*.gif)))

Click apply and you're done.

Edited by O.G
  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Just for anyone reading, AdGuard (the free, standalone MV3 extension) is quite good now, a direct competitor to uBlock Origin Lite and much more built-out than it.
    • Microsoft Edge 149.0.4022.62 by Razvan Serea Microsoft Edge is a super fast and secure web browser from Microsoft. It works on almost any device, including PCs, iPhones and Androids. It keeps you safe online, protects your privacy, and lets you browse the web quickly. You can even use it on all your devices and keep your browsing history and favorites synced up. Built on the same technology as Chrome, Microsoft Edge has additional built-in features like Startup boost and Sleeping tabs, which boost your browsing experience with world class performance and speed that are optimized to work best with Windows. Microsoft Edge security and privacy features such as Microsoft Defender SmartScreen, Password Monitor, InPrivate search, and Kids Mode help keep you and your loved ones protected and secure online. Microsoft Edge has features to keep both you and your family protected. Enable content filters and access activity reports with your Microsoft Family Safety account and experience a kid-friendly web with Kids Mode. The new Microsoft Edge is now compatible with your favorite extensions, so it’s easy to personalize your browsing experience. Download: Microsoft Edge (64-bit) | 193.0 MB (Freeware) Download: Microsoft Edge (32-bit) | 170.0 MB Download: Microsoft Edge (ARM64) | 188.0 MB View: Microsoft Edge Website | Release History Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yeah, when I saw that, I wanted to find the nearest nose. You can't find a good nose these days when you need one.
    • Anthropic launches Claude Fable 5, a state-of-the-art AI model that beats OpenAI's GPT-5.5 by Pradeep Viswanathan Back in April, Anthropic announced Claude Mythos Preview, a frontier model with state-of-the-art coding capabilities. Due to the cybersecurity implications that would occur due to the availability of such a powerful model, Anthropic made it available to only a select set of companies around the world. The company's plan was to prepare appropriate guardrails before releasing such a powerful model to everyone. Now, after nearly two months, Anthropic announced Claude Fable 5, its most capable AI model yet for general users. The company also announced Claude Mythos 5, the same underlying model as Fable 5, but with safeguards lifted, making it more suitable for selected cybersecurity and biology use cases. Claude Fable 5 sits a tier above its Opus models and it beats most other generally available models across areas including software engineering, knowledge work, vision, scientific research, and long-running autonomous tasks. To prevent model misuse, when Claude Fable 5 detects certain requests related to cybersecurity, biology, chemistry, or model distillation, the request will be routed to the Claude Opus 4.8 model. Anthropic claims that these safeguards trigger in less than 5% of sessions on average. However, for large organizations working on critical software, Claude Mythos 5 can be availed through Project Glasswing. Later, Anthropic has plans to expand access through a broader trusted access program. As you can notice in the benchmarks above, Fable 5 and Mythos 5 are state-of-the-art on most key AI benchmarks and they are well ahead of OpenAI's frontier model, GPT-5.5. For example, Fable 5 is the new state-of-the-art model for vision tasks. Also, Mythos 5 has the strongest cybersecurity capabilities of any model in the world. Claude Fable 5 and Claude Mythos 5 are priced at $10 per million input tokens and $50 per million output tokens, which is less than half the price of Claude Mythos Preview. Another big change is that Anthropic is making a change to the way they handle business customer data for both Fable 5 and Mythos 5 models. The company will now require 30-day retention for all traffic on both first- and third-party surfaces. Anthropic promises that it won't use the data to train Claude models, instead it will use it against complex and novel attacks. Claude Fable 5 is available today on the Claude API and consumption-based Enterprise plans. It is also included at no extra cost for Pro, Max, Team, and seat-based Enterprise customers from today through June 22. After that, users on those plans will need usage credits to continue using Fable 5, unless Anthropic extends the included access window based on capacity. Developers can access Fable 5 through the Claude API using the claude-fable-5 model name.
  • Recent Achievements

    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
    • One Year In
      jojodbn earned a badge
      One Year In
    • One Month Later
      jojodbn earned a badge
      One Month Later
    • Week One Done
      jojodbn earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      525
    2. 2
      PsYcHoKiLLa
      232
    3. 3
      +Edouard
      124
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!