Slipstreaming Office 2003 Service Pack 1


Recommended Posts

Introduction

Slipstreaming a service pack for Microsoft Office has the same advantages as slipstreaming a service pack for Microsoft Windows. The next time you need to install Office, it will already have the latest updates "out of the box" eliminating the need to update once the application is already installed.

Microsoft Office 2003 Professional has a total of 5 discs. I assume this guide only works on professional, but it shouldn't be too hard to get it working on other versions (really, just try the steps for disc 1 and that should work; can anyone confirm?). Each disc is similar to slipstream (so I copied and pasted, changing some things), but pay attention to details!

Prerequisites

This guide assumes you have the following tools:

- A working Microsoft Windows system

- A working internet connection

- WinRAR, or WinZip

Slipstreaming Service Pack 1 on disc 1

Disc 1 contains:

Word 2003, Outlook 2003, Excel 2003, Access 2003, PowerPoint 2003, Publisher 2003

(1) Downloading the update

Download this update (74MB) from Microsoft and save it anywhere.

(2) Extracting the update

Use WinZip, WinRAR, or any other compression utility that is able to extract files from an exe file. Use the tool to extract the files contained within Office2003SP1-kb842532-fullfile-enu.exe to C:\Office2003SP1\.

(3) Copying the CD

Unlike slipstreaming service packs for Windows, it is required that you do not simply copy the CD's contents. Place disc 1 in your CD drive. If a setup window appears, cancel it. Press the "Start" button and select "Run". Type D:\setup.exe /a into the box and press "OK". You may substitute D for your own CD drive letter. Once the setup comes up, use C:\Office2003\ as your "Install Location" and enter your CD key. Continue with the wizard. It will appear to be installing, but it is simply copying the files in a way that they will fit on a CD.

(4) Applying the service pack

Select "Run" from the "Start" menu again. This time, type msiexec /p C:\Office2003SP1\MAINSP1ff.msp /a C:\Office2003\PRO11.MSI shortfilenames=true /qb into the box and press "OK". When that finishes, select "Run" from the "Start" menu one last time. Now type msiexec /p C:\Office2003SP1\OWC11SP1ff.msp /a C:\Office2003\OWC11.MSI shortfilenames=true /qb and press "OK". Your updated disc 1 is now in C:\Office2003\. You may create an ISO from the files or burn them to a CD.

Slipstreaming Service Pack 1 on disc 2

Disc 2 contains:

FrontPage 2003

(1) Downloading the update

Download this update (74MB) from Microsoft and save it anywhere. This step is the same as in disc 1.

(2) Extracting the update

Use WinZip, WinRAR, or any other compression utility that is able to extract files from an exe file. Use the tool to extract the files contained within Office2003SP1-kb842532-fullfile-enu.exe to C:\Office2003SP1\. This step is the same as in disc 1.

(3) Copying the CD

Unlike slipstreaming service packs for Windows, it is required that you do not simply copy the CD's contents. Place disc 2 in your CD drive. If a setup window appears, cancel it. Press the "Start" button and select "Run". Type D:\setup.exe /a into the box and press "OK". You may substitute D for your own CD drive letter. Once the setup comes up, use C:\FrontPage2003\ as your "Install Location" and enter your CD key. Continue with the wizard. It will appear to be installing, but it is simply copying the files in a way that they will fit on a CD.

(4) Applying the service pack

Select "Run" from the "Start" menu again. This time, type msiexec /p C:\Office2003SP1\MAINSP1ff.msp /a C:\FrontPage2003\FP11.MSI shortfilenames=true /qb into the box and press "OK". When that finishes, select "Run" from the "Start" menu one last time. Now type msiexec /p C:\Office2003SP1\OWC11SP1ff.msp /a C:\FrontPage2003\OWC11.MSI shortfilenames=true /qb and press "OK". Your updated disc 2 is now in C:\FrontPage2003\. You may create an ISO from the files or burn them to a CD.

Slipstreaming Service Pack 1 on disc 3

Disc 3 contains:

Visio 2003 Professional

(1) Downloading the update

Download this update (22MB) from Microsoft and save it anywhere.

(2) Extracting the update

Use WinZip, WinRAR, or any other compression utility that is able to extract files from an exe file. Use the tool to extract the files contained within Visio2003-KB840663-FullFile-ENU.EXE to C:\Visio2003SP1\.

(3) Copying the CD

Unlike slipstreaming service packs for Windows, it is required that you do not simply copy the CD's contents. Place disc 3 in your CD drive. If a setup window appears, cancel it. Press the "Start" button and select "Run". Type D:\setup.exe /a into the box and press "OK". You may substitute D for your own CD drive letter. Once the setup comes up, use C:\Visio2003\ as your "Install Location" and enter your CD key. Continue with the wizard. It will appear to be installing, but it is simply copying the files in a way that they will fit on a CD.

(4) Applying the service pack

Select "Run" from the "Start" menu again. This time, type msiexec /p C:\Visio2003SP1\Visio2003-KB840663-FullFile-ENU.MSP /a C:\Visio2003\VISPRO.MSI shortfilenames=true /qb into the box and press "OK". Your updated disc 3 is now in C:\Visio2003\. You may create an ISO from the files or burn them to a CD.

Slipstreaming Service Pack 1 on disc 4

Disc 4 contains:

Project 2003 Professional

(1) Downloading the update

Download this update (25MB) from Microsoft and save it anywhere.

(2) Extracting the update

Use WinZip, WinRAR, or any other compression utility that is able to extract files from an exe file. Use the tool to extract the files contained within Project2003-KB837240-FullFile-ENU.exe to C:\Project2003SP1\.

(3) Copying the CD

Unlike slipstreaming service packs for Windows, it is required that you do not simply copy the CD's contents. Place disc 4 in your CD drive. If a setup window appears, cancel it. Press the "Start" button and select "Run". Type D:\setup.exe /a into the box and press "OK". You may substitute D for your own CD drive letter. Once the setup comes up, use C:\Project2003\ as your "Install Location" and enter your CD key. Continue with the wizard. It will appear to be installing, but it is simply copying the files in a way that they will fit on a CD.

(4) Applying the service pack

Select "Run" from the "Start" menu again. This time, type msiexec /p C:\Project2003SP1\Project2003-KB837240-FullFile-ENU.msp /a C:\Project2003\PRJPROE.MSI shortfilenames=true /qb into the box and press "OK". Your updated disc 4 is now in C:\Project2003\. You may create an ISO from the files or burn them to a CD.

Slipstreaming Service Pack 1 on disc 5

Disc 5 contains:

OneNote 2003

(1) Downloading the update

Download this update (19MB) from Microsoft and save it anywhere.

(2) Extracting the update

Use WinZip, WinRAR, or any other compression utility that is able to extract files from an exe file. Use the tool to extract the files contained within OneNote2003SP1-kb842774-fullfile-enu.exe to C:\OneNote2003SP1\.

(3) Copying the CD

Unlike slipstreaming service packs for Windows, it is required that you do not simply copy the CD's contents. Place disc 5 in your CD drive. If a setup window appears, cancel it. Press the "Start" button and select "Run". Type D:\setup.exe /a into the box and press "OK". You may substitute D for your own CD drive letter. Once the setup comes up, use C:\OneNote2003\ as your "Install Location" and enter your CD key. Continue with the wizard. It will appear to be installing, but it is simply copying the files in a way that they will fit on a CD.

(4) Applying the service pack

Select "Run" from the "Start" menu again. This time, type msiexec /p C:\OneNote2003SP1\ONENOTESP1ff.msp /a C:\OneNote2003\ONOTE11.MSI shortfilenames=true /qb into the box and press "OK". Your updated disc 5 is now in C:\OneNote2003\. You may create an ISO from the files or burn them to a CD.

Notes:

- In step 3 of each disc, it is important that you don't simply copy and paste the files. Run the command I gave you. Otherwise, you will end up with about 900 megabytes and you will not be able to burn it to a CD. Others have recommended a DVD in this thread if you end up with more than can fit on a CD.. but I personally haven't tested it and it all fits on a CD for me. (Note added on October 13, 2004)

- Copying this post (in part or in whole) without giving credit is called plagiarism.. I don't care if you copy this, but at least link back to this thread or write your own instructions. This took a lot of my time to polish. (Note added on October 13, 2004)

- All in one (AIO) CD's cannot be upgraded to Service Pack 1. You must use the original installation source. The all in one maker from xbetas is indeed warez in its current form, as it contains serial numbers. (Note added on January 15, 2005)

- Keywords for people searching: sp1 office 2003 office 2k3 o2k3 slipstream slipstreaming service pack 1 (Note added on July 11, 2005)

I'd like to thank everyone for 15,000 views of this thread. I can only hope I've helped 15,000 people. I'd also like to thank Larney for all of his hard work and helpfulness in this thread. :)

Edited by todd`

I just want to add (with a new post, so it's more noticable) that I apologize for the size of my post, but slipstreaming a service pack on 5 cd's isn't going to be short ;)

The content is mostly the same, but it's the links, commands, and files that change each CD

warez?

actually i just merged the 5 cds into one file using a utility from xbetas. i was hoping on slipstreaming the service pack from there.. slipstreaming the Sp's into each of the 5 cds and then running the merging util didnt sound like the best idea and was way too much work for me to attempt =p

You should note:

If you get an error on slipstreaming into RTM admin install point:

ERROR CANNOT FIND PRODUCT KEY SETUP CANNOT CREATE ADMIN INSTALL POINT.

Just run SETUP.EXE /A again make sure to specify a product key save to a new location and run slipstream again it will work.

got this error when i copied my CD to HD for slipstreaming. ( it was an admin install CD i made myself with Product Key in it)

maybe it got the read-only attrib, in any case i was surprised it let's you recreate the Admin point using the decompressed files.

1 more note:

you might want to add instructions for updating the web componants of Disc 4 Project.

For those that want to do a slipstream AIO, you're going to have to slipstream the individual discs as per the instructions, then run the AIO utility again. Pretty simple, works a treat - I did it myself. The ISO is a touch bigger, but still small enough to fit on one CD.

I've been meaning to ask this actually but never got the chance till now.

How could I slisptream SP1 onto a image that has an admin installation point created already from when I slipstreamed a few hotfixes? :cool:

Instead of running setup /a you could copy the cd contents to your hard drive, slipstream the SP and write everything to a new CD-R.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Apple is expanding Private Cloud Compute beyond its own data centers by Pradeep Viswanathan At WWDC 2026, as part of the improved Apple Intelligence capabilities, Apple today announced that it is expanding Private Cloud Compute (PCC), its privacy-focused cloud infrastructure for Apple Intelligence, beyond its own data centers for the first time. Private Cloud Compute was designed to handle Apple Intelligence requests that are too complex to run fully on-device. The PCC system does not store user data and does not allow Apple or anyone else to access user requests. Last year, Apple also expanded its Security Bounty program with rewards of up to $1 million for researchers who could find serious vulnerabilities in PCC. Until now, Apple's PCC data centers were using Apple's own silicon. As part of the expansion, Apple is working with Google and NVIDIA to run new Apple Intelligence workloads on Google Cloud systems powered by NVIDIA GPUs. Apple will be using this new infrastructure to execute more demanding AI tasks while maintaining the same privacy and security guarantees of PCC. The new implementation uses NVIDIA Confidential Computing with NVIDIA GPUs, Intel CPUs with TDX, and Google’s Titan chip. Apple says it has worked with Google to build additional protections beyond a traditional confidential computing deployment. Despite the expansion to third-party data centers, Apple claims that its core PCC requirements remain unchanged, including stateless computation, no privileged runtime access, non-targetability, and verifiable transparency. The company highlighted that it will continue to control the PCC software stack, and Apple devices will only trust PCC software that has been cryptographically approved by Apple. To take security to the next level, Apple mentioned that it is maintaining an append-only ledger of Google Cloud hardware that is part of the PCC fleet. The company claims this will help reduce the risk of supply chain attacks. In addition to AI infrastructure, Apple also worked with Google to use technologies behind the Gemini family of models to build the next generation of Apple Foundation Models to power Apple Intelligence features across on-device and cloud workloads. As expected, for more demanding AI tasks like agentic tool use and complex reasoning, Apple will rely on the expanded PCC infrastructure running on Google Cloud. The expansion of PCC on Google Cloud will gradually ramp toward the full set of protections during the summer preview period. As before, Apple will also publish binaries for public inspection, provide research tooling, and give researchers access to live PCC nodes in research mode through the Apple Security Bounty Program.
    • my problem with outlook (new) is that it connects only to outlook.com. all connections to external providers goes through there. Got your mail server and want to use imap directly? no way... it adds a connector on outlook.com. last bug; if your email on an external provider if the same as principal email of your microsoft account, it doesn't work...
    • It's the only reason I finally have an iPhone (for work) and enjoy using it so much that I'm tempted to move from android next time I need to replace my own device
    • So is Russia, China, Iran, North Korea, just to mention a few. What's your point? Everyone is a threat from their enemies' perspective. I'd say that Israel is only a threat to their immediate enemies like Hamas, Hezbollah and the Iranian regime, not to anyone else.
    • The government is not the good guy either. You propose 99% of people require that the government overreach and govern their freedom of information and privacy, while ignoring the government is made up 100% of people, of which 99% are (as you described) brain dead. You can't have both. The reality is Signal is absolutely right and the government is doing what it has always done. Ignoring that we are their boss and grabbing all the power they possibly can to make sure we aren't. Your (societies) ###### parenting is not reason enough as to why I can't have a safe platform for my data/information. Thinking the government is helping is precisely what they are targeting psychologically to take suckers like you for a ride. "Think of the children" was, has, is, and will always be a mechanism of control. In the rare occasion it's actually essential the mass consensus has always been there and it doesn't become a debate.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      222
    3. 3
      ATLien_0
      92
    4. 4
      +Edouard
      86
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!