mikejd1 Posted June 12, 2002 Share Posted June 12, 2002 hey neowin....got a major problem. i have two cd roms hooked up to the secondary IDE on my motherboard. Everytime my PC reboot, on the main system startup screen, the Secondary Master and secondary slave dissapear and show "none" but when i shut down and shut the PC off from the back switch, and turn itback on, both CD roms now show. This is eally starting to get to me. Any suggestions????? Mike Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 top.... anyone? Link to comment Share on other sites More sharing options...
masterbug Posted June 12, 2002 Share Posted June 12, 2002 I can only tell you the obvious, check your ide cables and master/slave jumpers... Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 I assume what your saying is when your mobo posts and it shows what's starting BEFORE getting into windows it says None there right? But when you cut the power and turn it back on your mobo detects them? If thats so it sounds like a bios problem, if those channels are set to auto in the bios try manually setting them to cd-rom, if set manually try to turn them to auto. What kind of motherboard is it? Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn I assume what your saying is when your mobo posts and it shows what's starting BEFORE getting into windows it says None there right? But when you cut the power and turn it back on your mobo detects them? If thats so it sounds like a bios problem, if those channels are set to auto in the bios try manually setting them to cd-rom, if set manually try to turn them to auto. What kind of motherboard is it? The board is K7S6A Ok, here is what I found. I have two cd roms and two hard drives. Both Hardrives are on primary as master and slave. the cd roms are on Secondary master and slave. The primary harddrive is my Wester Digital 45er and the second is my IBM 120 Gig. I have the WD set to master and the IBM to slave. Everytime i boot my pc with just the Western Digital and the Primary master with no Primary slave, EVERYTHIUNG WORKS GREAT..but once that IBM is connected as the primary slave, all hell breaks loose....does this help? Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 hey I got a k7s5a. Well you could try moving the IBM to the other master so that both HD's are Masters and both cd-roms are slaves. Second, maybe a bios upgrade could fix it. Third try searching and posting here. The best ECS forum there is and a great source of info. But you may have to bump a couple but once the guys bite there you'll get some good help. Here it is. http://forum.ocworkbench.com/ocwbcgi/ultim...?ubb=forum&f=27 Hope any of this helps. Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn hey I got a k7s5a. Well you could try moving the IBM to the other master so that both HD's are Masters and both cd-roms are slaves. Second, maybe a bios upgrade could fix it. Third try searching and posting here. The best ECS forum there is and a great source of info. But you may have to bump a couple but once the guys bite there you'll get some good help. Here it is. http://forum.ocworkbench.com/ocwbcgi/ultim...?ubb=forum&f=27 Hope any of this helps. first off....how do i upgrade the bios. :) i cant find there website. Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 http://www.ecs.com.tw Thats the Tiawanese website, they get the newer drivers earlier than the us site. But don't bother, i checked the revisions and the new bios add's usb fixes and support for the new athlon. Rule of thumb with ECS boards i've found is don't flash unless it fixes something you need. And If you do decide to flash read thier faqs up there cause your board uses a different flash utility than mine. Basically what it'll entail is put the biosflash utility and the bios rom file you wanna upgrade to, you'll reboot into dos, if using xp you'll need a dos boot disk, then start the flash program and select what you want to do OR you'll have to find out the switches and flash from the command line. Not recommended if you haven't done it before And it won't fix your problem. Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn http://www.ecs.com.tw Thats the Tiawanese website, they get the newer drivers earlier than the us site. But don't bother, i checked the revisions and the new bios add's usb fixes and support for the new athlon. Rule of thumb with ECS boards i've found is don't flash unless it fixes something you need. And If you do decide to flash read thier faqs up there cause your board uses a different flash utility than mine. Basically what it'll entail is put the biosflash utility and the bios rom file you wanna upgrade to, you'll reboot into dos, if using xp you'll need a dos boot disk, then start the flash program and select what you want to do OR you'll have to find out the switches and flash from the command line. Not recommended if you haven't done it before And it won't fix your problem. i have the XP 2100+ does this mean i should upgrade now? Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 do a quick thing for me reboot the computer and while it's booting it'll show either a bios version or a date get that for me and I'll tell you. Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 And another thing, I never quit understood if the IDE channel was failing DURING boot or in Windows. If it's windows a new driver might fix it, although unlikely Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn do a quick thing for me reboot the computer and while it's booting it'll show either a bios version or a date get that for me and I'll tell you. 1/16/2002 is the bios date. Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn And another thing, I never quit understood if the IDE channel was failing DURING boot or in Windows. If it's windows a new driver might fix it, although unlikely during boot. Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 no you have the next to latest bios, the only thing added was support for new athlon but it doesn't say wich. Plus your cpu's fine anyways. Try switching the drives then the forum. Also how many ram dimms do you have? Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn no you have the next to latest bios, the only thing added was support for new athlon but it doesn't say wich. Plus your cpu's fine anyways. Try switching the drives then the forum. Also how many ram dimms do you have? 1 RAM dimm at 512 333mhz PC2700 Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 12, 2002 Veteran Share Posted June 12, 2002 no ram problem most likely. Try this site http://www.storage.ibm.com/hdd/support/dow...tm#Installation I gotta go to work but i'll try and check in during lunch. Link to comment Share on other sites More sharing options...
mikejd1 Posted June 12, 2002 Author Share Posted June 12, 2002 Originally posted by mAcOdIn no ram problem most likely. Try this site http://www.storage.ibm.com/hdd/support/dow...tm#Installation I gotta go to work but i'll try and check in during lunch. thanks buddy. Link to comment Share on other sites More sharing options...
mAcOdIn Veteran Posted June 13, 2002 Veteran Share Posted June 13, 2002 sorry crappy work day, anything new? Link to comment Share on other sites More sharing options...
mikejd1 Posted June 13, 2002 Author Share Posted June 13, 2002 hey, not sure yet. lol, i went home to trouble shoot yesterday but still seeming to have problems. I'm gonna try it one more time. Just for ****s and giggles...I'll run what I have set right now for you.. Primary Master: WD 45gig set to "master" Primary Slave: IBM 120 GXP set to "slave" Secondary Master: Regular CD rom Secondary Slave: Plextor 40X CDRW Wanna check the specs on this drive on the IBM website? Maybe I'm doing something wrong. Mike Link to comment Share on other sites More sharing options...
Recommended Posts