Cannibal Corpse Posted June 15, 2002 Share Posted June 15, 2002 Dear All, I am about to put together a retail 1.8a P4, Abit IT7 MAX (DDR and Soft Menu III) and need to know what parameteres should I use in the BIOS? These include: CPU Multiplier CPU Votlage and RAM <---(this part is where I am am NOT familiar with) Thanks in advance. Link to comment Share on other sites More sharing options...
username Posted June 15, 2002 Share Posted June 15, 2002 OK, first try upping the FSB from 100 to the next highest setting until you can no longer get into windows then up the DDR voltage and the CPU voltage a setting up and try again. Repeate the process till you hit a limit What is the speed of your RAM, if it PC2100 (DDR266) it has a speed of 133mhz so you should have no problem running that 100mhz FSB P4 up to that level Also know where your CMOP reset jumper is on the motherboard in case you get locked out of your BIOS. Read this first however (does not matter that its AMD) http://www.amdmb.com/article-display.php?ArticleID=148 Link to comment Share on other sites More sharing options...
Recommended Posts