Recommended Posts

Having issues hooking up a network connection to my Netgear Wireless router.

Vista seems to see my wireless network and when i try to connect with the WPA passphrase it says connecting but my router doesnt seem to respond with a valid dhcp address. (ie throws back the old 169.x.x.x IP address)

I then tried a static IP 192.168.1.10 along with 192.168.1.1 as my gateway and when it takes i check by running ipconfig /all and for some reason the default gateway remains blank..... :angry:

I cant get an internet connection........

Has this got something to do with my wireless pci card driver? (WAG311 Netgear)

HELP!!!

Nevermind Its working now Im posting it from Vista and it insanely fast!!

It<s so stable and all my drivers are installed! :laugh:

586294676[/snapback]

man... why they sent me that invitation >>>> Microsoft Windows Installer 6.2 Beta Program Invitation

it's Vista.... i want that Vista :devil:

Well, I have spent at least 18 hours on trying to install it on my laptop and It just will not work. Oh well. I could install it on my desktop but, I seriously do not want to change what I have set up, way too much of my work. All my hardware I have double checked to make sure it is supported only thing I am not sure about is my Intel Pro Wireless 2200 pci. I am seriously upset and frustrated at this.

I have no idea what the issue is, all my hardware is supported I even logged in and redownloaded the ISO thinking it may have been a bad burn or download.

586293731[/snapback]

Only took me 45 minutes, which I'm stunned by :blink:

Keep trying, it really is worth it!

Worst case, create a small XP partition, put the ISO image on there with demon tools and install from the image to a second partition like I did, worked first time!

Having issues hooking up a network connection to my Netgear Wireless router.

Vista seems to see my wireless network and when i try to connect with the WPA passphrase it says connecting but my router doesnt seem to respond with a valid dhcp address. (ie throws back the old 169.x.x.x IP address)

I then tried a static IP 192.168.1.10 along with 192.168.1.1 as my gateway and when it takes i check by running ipconfig /all and for some reason the default gateway remains blank.....  :angry:

I cant get an internet connection........

Has this got something to do with my wireless pci card driver? (WAG311 Netgear)

HELP!!!

586294538[/snapback]

Some screenshots attached........

post-120911-1122680384.jpgpost-120911-1122680394.jpgpost-120911-1122680406_thumb.jpgpost-120911-1122680369.jpg

I got it working on VMWare

But I can't install it on my PC!! The progress bar gets up to just past the 2 at the bottom, then I get A file couldnt be found message followed by

"this application has failed to start because TAPI32.dll was not found. Re-installing the application may fix this problem."

WTF!? Can anyone suggest how I might be able to get this working?

Re-Burn the ISO?

Just got it installed and is working beautifully :D :D

Installed it without a hitch. Got a question though: when I installed it, it created the Windows.old folder with all the old files from the XP, are stuff from that folder still usable?

I havent been following this thread that much...also how do you get the glass/transparent windows?

ummm i get the Aero Glass and all those cool tings on my Old Gforce FX 5200 128MB

should i install those new Nvidia Drivers ??? (faster, better or something...)

586292647[/snapback]

only required for thr 6xxx and 7xxx cards dude

Just got it installed and is working beautifully :D :D

Installed it without a hitch.  Got a question though:  when I installed it, it created the Windows.old folder with all the old files from the XP, are stuff from that folder still usable?

I havent been following this thread that much...also how do you get the glass/transparent windows?

586295260[/snapback]

for nvidia cards: Nvidia Alpha Drivers for 6xxx and 7xxx series cards

I got it working on VMWare

But I can't install it on my PC!! The progress bar gets up to just past the 2 at the bottom, then I get A file couldnt be found message followed by

"this application has failed to start because TAPI32.dll was not found. Re-installing the application may fix this problem."

WTF!? Can anyone suggest how I might be able to get this working?

Re-Burn the ISO?

586294869[/snapback]

I also met this problem!

ai first i only build one subarea ,and windows appeared the message the same as yours!

then i build another subarea,all is OK NOW!

I'm beta tester did anyone know if we will going to have for free the final version of VISTA?  :cool:

586295315[/snapback]

That really depends how good a tester you prove to be :)

From Vista B1 first impressions article:

a major change in the way we use our personal computers is coming through Vista
I find that very hard to believe. Still gonna have the start menu, still gonna be throwing all our stuff on the desktop, still gonna be using our computers the same way we have been.

Can i point out please, before i get any more PM's, that Aero Glass will only work on DirectX 9.0c cards - if you can get it working on non dx9, great, if not, thats how it should be.

Finally got around to having sometime to install.

Having a problem when selecting partition. I have 2 HDs, one HD has XP installed and I don't want to install on that as it said it will make that Windows install useless.

So I am trying to select the 2nd drive but it gives a message ::: "The partition you have selected has one or more dynamic volumes that are not supported for Windows installation"

How can I fix this?

Thanks

Finally got around to having sometime to install.

Having a problem when selecting partition.? I have 2 HDs, one HD has XP installed and I don't want to install on that as it said it will make that Windows install useless.

So I am trying to select the 2nd drive but it gives a message? ::: "The partition you have selected has one or more dynamic volumes that are not supported for Windows installation"

How can I fix this?

Thanks

586295464[/snapback]

format the drive under Windows XP as NTFS, should be fine then

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • When I was a teen, I actually believed that the government used to be always be the bad guy. However as an adult, someone who has actually seen the Law work (though not perfect). I now think everyone cries a river. In this specific case, the so called freedom has consequences to society. Anyone who has seen how child are indeed affected, and I don't mean only extreme things like getting drugs or hate crimen , but no one can deny society as a whole has gone down a rabbit hole due to exesive use of internet. Before anyone calls out that it's the parents responsibility. Yes that's true, but the reality your family/kids might be good people. There are 99% out there who are not and have been brain dead by many things on the internet.
    • Siri AI : iPhone Air, iPhone 17 Pro iPad with M4 and later with 12GB or more in memory Mac with M3 and later with 12GB or more in memory
    • Siri AI will only work locally on these new machines. Not great iPhone Air, iPhone 17 Pro iPad with M4 and later with 12GB or more in memory Mac with M3 and later with 12GB or more in memory
    • Universal Media Server 15.6.0 by Razvan Serea Universal Media Server is a DLNA-compliant UPnP Media Server. UMS was started by SubJunk, an official developer of PMS, in order to ensure greater stability and file-compatibility. The program streams or transcodes many different media formats with little or no configuration. It is powered by MEncoder, FFmpeg, tsMuxeR, AviSynth, MediaInfo and more, which combine to offer support for a wide range of media formats. Because it is written in Java, Universal Media Server supports all major operating systems, with versions for Windows, Linux and Mac OS X. To see a comparison of popular media servers, click here. Universal Media Server 15.6.0 changelog: General Added Discogs integration for audio metadata and UPnP Added new options for DNS resolution handling (thanks, @henry701 Henrique Campos!) Added a loading indicator to the Shared Content area on the web settings (#6037) Improved detection of sample videos Improved stability of speed test (thanks, @henry701 Henrique Campos!) Fixed support for servers with no Internet access (#6047) (thanks, @henry701 Henrique Campos!) Fixed wrong Linux yt-dlp binary being packaged (#6011) (thanks, @Pro-pra!) Fixed API lookups happening for TV series when episode lookup fails, even if the series metadata is already in the local database (#6080) Fixed JDK being used in Docker image instead of JRE (#6089) (thanks, @mvanhorn Matt Van Horn!) Fixed editing a video feed on the web settings erases the URL (#6046) (thanks, @serinekjo kjo!) Fixed docs for FFmpeg GPU support (thanks, @Harshit-dell Harshit Kumar Sahu!) Translation updates via Crowdin Dutch (97%) (thanks, Lefteye!) English (United Kingdom) (80%) (thanks, Andi Chandler!) Italian (63%) (thanks, parduz!) Portuguese (Brazilian) (67%) (thanks, Henrique Campos!) Download: Universal Media Server 15.6.0 | 157.0 MB (Open Source) Download: Other operating systems View: Universal Media Server Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      222
    3. 3
      ATLien_0
      92
    4. 4
      +Edouard
      86
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!