GUNNER Posted April 28, 2003 Share Posted April 28, 2003 here is my 1700+ Palameno :D Link to comment Share on other sites More sharing options...
m0 Posted April 28, 2003 Share Posted April 28, 2003 here is my 1700+ Palameno :D crop? ;) m0. Link to comment Share on other sites More sharing options...
JK1150 Posted April 28, 2003 Share Posted April 28, 2003 (edited) these are my overclocked, updated a bit. It's stable and fast, so I like it. no problems at all EDIT: err... sry I have a socket 478, forgot to update my CPU program, just found it on my HD Edited April 29, 2003 by JK1150 Link to comment Share on other sites More sharing options...
Qba73 Posted April 30, 2003 Share Posted April 30, 2003 ok now up to 3.4ghz stable with a p4 2.4b Link to comment Share on other sites More sharing options...
JK1150 Posted April 30, 2003 Share Posted April 30, 2003 ok now up to 3.4ghz stable with a p4 2.4b damn, how did u do that? Link to comment Share on other sites More sharing options...
thE_qubE Posted April 30, 2003 Share Posted April 30, 2003 ok now up to 3.4ghz stable with a p4 2.4b ok, now how the f**k did u do that????? do u have a water cooling system or sumthin.. Link to comment Share on other sites More sharing options...
Qba73 Posted April 30, 2003 Share Posted April 30, 2003 no water cooling, she's a air breather, with a swiftech mcx4000 (awesome heatsink!) with a thermaltake smartfan 2. Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95. p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100) Link to comment Share on other sites More sharing options...
rezza Veteran Posted April 30, 2003 Veteran Share Posted April 30, 2003 not much here. i did have my xp 2000+ running at 1800mhz, but it was getting a bit too hot so i just dropped it back down to almost factory settings. and my ti4600 is barely overclocked at all... i would overclock if i had any cooling whatsoever in here - i don't even have any thermal paste on my processor, neither do i have any case fans. my cpu runs at around 55 idle, 60-65 load, and the case temp is around 50... :blush: as soon as i get me a job, i'll get some cooling and crank her up a bit. Link to comment Share on other sites More sharing options...
thE_qubE Posted April 30, 2003 Share Posted April 30, 2003 no water cooling, she's a air breather, with a swiftech mcx4000 (awesome heatsink!) with a thermaltake smartfan 2. Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95. p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100) is your mobo naturally fsb@800mhz or is it 533mhz and you overclocked it? :blink: Link to comment Share on other sites More sharing options...
m0 Posted April 30, 2003 Share Posted April 30, 2003 I only have one overclock :D 1700+ @ 2000Mhz :yes: are Ati Radeon 9100 overclockable? m0. Link to comment Share on other sites More sharing options...
sciguy007 Posted May 1, 2003 Share Posted May 1, 2003 im proud of myself. just did my first overclock and so far so good. p4 2.4b running @ 150 fsb, 2.7ghz (default 1.525V), and my memory is at 2-2-2-6 and 400mhz (150*2.66 @ 2.6V) weeeeeee...fun. i hope i dont blow something up later. :o Link to comment Share on other sites More sharing options...
Qba73 Posted May 1, 2003 Share Posted May 1, 2003 no water cooling, she's a air breather, with a swiftech mcx4000 (awesome heatsink!) with a thermaltake smartfan 2. Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95. p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100) is your mobo naturally fsb@800mhz or is it 533mhz and you overclocked it? :blink: its a 533 board sis 655 chipset Link to comment Share on other sites More sharing options...
thE_qubE Posted May 1, 2003 Share Posted May 1, 2003 no water cooling, she's a air breather, with a swiftech mcx4000? (awesome heatsink!) with a thermaltake smartfan 2. Well to start i have a sinxp1394 (which is a great overclocker), i have my vcore @ 1.60 which is not high at all, runnin my pc3500 el ddr @ 1:1 ratio with the cpu, have my fsb @ 190, and memory @ 380 2-8-2-2 timings and thats pretty much it, boot and go...and my temps are 36-37 idle 45-46 @ load and 47-48 running prime95. p4 2.4b's are great overclockers, the b designates that is a 533 (4x133)chip and not a 400 (4x100) is your mobo naturally fsb@800mhz or is it 533mhz and you overclocked it?:blink:: its a 533 board sis 655 chipset so wat ure trying to tell me is that you've overclocked an P4@2.4 to 3.4, and taken your fsb to 633 from 533 without water cooling with just a heatsink and a fan???? wats ure mobo? MSI? Soyo?...and what kind of Tower do you have? Link to comment Share on other sites More sharing options...
ck2k01 Posted May 1, 2003 Share Posted May 1, 2003 ya man ive seen alot of people hit 3.4 gig with his chip and some even as high as 3.8 on aircooling! expecially if they have the chip that came from, uhhh, puerto rico was the country i beleive Link to comment Share on other sites More sharing options...
enigma-penguin Veteran Posted May 1, 2003 Veteran Share Posted May 1, 2003 bwhahahaha go puerto rico, *thinks of a vacation* ahhh western countries and their missuse of foreign labor now lets see amd go there heheh maybe they'll make a good chip Link to comment Share on other sites More sharing options...
Rudnartim Posted May 1, 2003 Share Posted May 1, 2003 Man I overrevved mine to about 9000 boy it didnt like that at all LOL But any I had an Athlon 750 overclocked to 850 .. stock cooling Now have an P3 550 to gonna risk overclocking since my athlon died just last summer un expectedly......... sigh.......... Though I working on plans to completely submerger a system and do a complete system overclock... any tips? Link to comment Share on other sites More sharing options...
Qba73 Posted May 1, 2003 Share Posted May 1, 2003 so wat ure trying to tell me is that you've overclocked an P4@2.4 to 3.4, and taken your fsb to 633 from 533 without water cooling with just a heatsink and a fan???? wats ure mobo? MSI? Soyo?...and what kind of Tower do you have? yes its a 533 board, actually its running closer to 800fsb, like 759bus to be exact,...no water just an air breather, alot of people understimate the mcx4000 heatsink, and the p4 2.4b, its giving me a 1000 mhz overclock and the great thing about it is it rock stable. I have a Gigabyte SinXP1394 Dual channel ddr board. i have an enermax CS-3171L-B3A tower (with the rainbow light cathodes on the sides,) Link to comment Share on other sites More sharing options...
Krage Posted May 1, 2003 Share Posted May 1, 2003 Just finished a new OC'd system: Tbred-B 1700+ DLT3C JIUHB 0310XPMW Epox 8rda+ 512mb corsair xms3200 vantec aeroflow hsf (with as3) Got this system running at 2900+ (2.3GHz, 11.5 x 200) on 1.625v rock solid stable. Everything's in an antec sonata with the case fan on temp controlled and temps are 32C idle / 41C load / 28C case / 20C ambient. Formerly I was running a P3 500E @ 667. Link to comment Share on other sites More sharing options...
enigma-penguin Veteran Posted May 1, 2003 Veteran Share Posted May 1, 2003 My system just got its revamp........ 30 degrees no load and 36 degrees load Thermaltake 8cm Smart Fan II cool mod x2 Vantec tornado 80 mm fan (ducted) on a thermalright sk-7 heatsink bumped her up 5% in volts added pc3500 ram kicked her upto 1850 but im not sure about higher Link to comment Share on other sites More sharing options...
lammmetak Posted May 1, 2003 Share Posted May 1, 2003 i got a amd 2400 overclocked to a AMD 2800+ cooler: Thermaltake 7+ no load: 40-42 degrees on load: 45-47 degrees from 2 ghz to 2.25 ghz multiplier: 13.5x166 vcore: 1.8v look in my sig for my specs Link to comment Share on other sites More sharing options...
enigma-penguin Veteran Posted May 2, 2003 Veteran Share Posted May 2, 2003 ok so maybe i should make it faster... considering that im running lower temps Link to comment Share on other sites More sharing options...
generalstupid Posted May 5, 2003 Share Posted May 5, 2003 i have mine up in my sig... but my memory timings are 5-2-2-2... i have my vcore at 1.8 and my ram voltage at 2.7... Link to comment Share on other sites More sharing options...
knightcomm Posted May 5, 2003 Share Posted May 5, 2003 I got a 2400+ @ 2450MHz (175MHz FSB) Rated 3100+ a 1700+ @ 1647MHz (150MHz FSB) Rated 2000+ and my Duron 1GHz @ 1332MHz (133MHz FSB) I hope to push the 2400 up a little more when I get my new dual channel ram in... right now I am only using Samsung PC2700 :whistle: Link to comment Share on other sites More sharing options...
lammmetak Posted May 5, 2003 Share Posted May 5, 2003 I got a 2400+ @ 2450MHz (175MHz FSB) Rated 3100+a 1700+ @ 1647MHz (150MHz FSB) Rated 2000+ and my Duron 1GHz @ 1332MHz (133MHz FSB) I hope to push the 2400 up a little more when I get my new dual channel ram in... right now I am only using Samsung PC2700 :whistle: i got the same cpu and motherboard( not deluxe) and samsung 3200 but if i put it higher it gets un stabel so u put the vcore higher but i had it on 1.8( wich is the max of this board) how did u do that and what r ur multiplier and fsb? Link to comment Share on other sites More sharing options...
akira Posted May 20, 2003 Share Posted May 20, 2003 (edited) Update!!... :cool: AMD Athlon xp 1700+ DLT3C o/c to 2.10GHz (Fsb 210*10) Vcore at 1.6V Abit NF7-S rev 2.0 Coolermaster HHC-001 running fan at 7200 rpm idle 47C full load 53C ( need extra cooling ) Abit Siluro G4 Ti 4200 OTES 128 MB Windows XP SP1 Edited May 20, 2003 by akira Link to comment Share on other sites More sharing options...
Recommended Posts