How To Use OpenBSD uath driver in Ubuntu


Recommended Posts

I need some Info on if its possible to install This OpenBSD: uath(4) Driver for a Atheros USB AR5005UG/AR5005UX on Ubuntu any info on what i need to get it to work if its possible

uath(4), a driver for Atheros USB2.0 AR5005UG/AR5005UX chipsets. Based on a black-box analysis of the Windows binary driver.

UATH(4) OpenBSD Programmer's Manual Page

OpenBSD: Atheros USB AR5005UG/AR5005UX

I'm not sure about that but just from looking around on google some people have gotten it to work using the old madwifi drivers:

1. install the sharutils and the build-essential packages

2. uninstall the restricted-modules package

3. Get old madwifi http://snapshots.madwifi.org/madwifi-old-current.tar.gz

4. untar, make, sudo make install

5. Check to make sure old modules are not loaded and remove if they are.

6. sudo modprobe ath_pci

7. sudo dhclient ath0

Good luck.

  TheMassAppeal said:
Atheros madwifi drivers does not support USB devices and ndiswrapper is a pain anyone know if this is possible

and OpenBSD are getting drivers to work by reverse engineering

Before making assumptions, you should at least try. The madwifi drivers that I have mentioned DO work with the USB adapter you are wanting to work. What you are wanting to do is more of a pain that using ndiswrapper (which, by the way, works with the ar5005 usb adapter).

ok i will try what you said and see if thats the way to go well the only reason i wanted to try and install the openBSD firmware uath(4) driver in Ubuntu was because i would then be able to put a Atheros USB AR5005UG/AR5005UX in Monitor Mode

well i did not get it to work with madwifi so i went back to try and use ndiswrapper used a different USB WIFI i have a Belkin N1 Wireless USB Network Adapter just tried it and it worked with ndiswrapper i should of tried it first i still want to be able to use my Netgear WPN111 Atheros USB AR5005UG so i can run it in Monitor Mode

Screen shot to show you that i have it working

screenshotyw9.th.png

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • TP-Link Tri-Band AXE5400 Wi-Fi 6E Gaming Router Archer GXE75 is just $135 by Sayan Sen If you’re juggling gaming consoles, 4K streams and a growing roster of smart devices, the TP-Link Archer GXE75 Tri-Band AXE5400 Wi-Fi 6E Gaming Router is a good option to look at right now, considering the device is currently on sale at just $135 (purchase link under the specs table below). The Archer GXE75 promises up to 5.4 Gbps of throughput across three bands: 574 Mbps on 2.4 GHz, 2402 Mbps on 5 GHz and 2402 Mbps on 6 GHz (HE160 channels enabled). A 2.5 Gbps WAN/LAN port pairs with three 1 Gbps LAN ports and a USB 3.0 port for fast file sharing or printer access (purchase link down below). The quad-core CPU and 512 MB of RAM should help to handle multiple streams without bogging down, while MU-MIMO, OFDMA and 1024-QAM improve efficiency when several devices connect simultaneously. The router’s built-in Game Accelerator engine is said to automatically prioritize gaming packets (both wired and wireless), and TP-Link’s GPN (Gamers Private Network) acceleration can reduce packet loss for supported titles. HomeShield security brings firewall protection, device quarantining and parental controls. The technical specifications of the router are given below: Specification Details Wireless Standards IEEE 802.11ax 6 GHz; IEEE 802.11ax/ac/n/a 5 GHz; IEEE 802.11ax/n/g/b 2.4 GHz Wi-Fi Speeds 6 GHz: 2402 Mbps (802.11ax); 5 GHz: 2402 Mbps (802.11ax); 2.4 GHz: 574 Mbps (802.11ax) Spatial Streams 6 streams (tri-band OFDMA/MU-MIMO) Processor 1.7 GHz 64-bit Quad-Core CPU Memory 512 MB high-speed RAM Ethernet Ports 1× 2.5 Gbps WAN/LAN; 1× 1 Gbps WAN/LAN; 3× 1 Gbps LAN USB 1× USB 3.0 SuperSpeed port (up to 10× faster than USB 2.0) Antennas 4× high-performance external antennas with Beamforming Buttons Power On/Off; Reset; WPS/Wi-Fi; LED On/Off Working Modes Router Mode; Access Point Mode Security WPA, WPA2, WPA3, WPA/WPA2-Enterprise; SPI firewall; Access Control; IP/MAC binding; Application-layer gateway; HomeShield security suite VPN OpenVPN, PPTP, L2TP (server & client); WireGuard (server & client) Software & Services IPv4/IPv6; TP-Link HomeShield; EasyMesh; Parental controls; QoS by device; WAN types (Dynamic IP, Static IP, PPPoE, PPTP, L2TP); DDNS (TP-Link, NO-IP, DynDNS); auto firmware updates Gaming Features Game QoS boost; gaming-port priority; Gamers Private Network acceleration; game-port forwarding; real-time game panel with stats & RGB control Operating Environment 0 °C – 40 °C; 10 %– 90 % non-condensing humidity Get the TP-Link Tri-Band AXE5400 Wi-Fi 6E Gaming Router Archer GXE75 at the link below: TP-Link Tri-Band AXE5400 Wi-Fi 6E Gaming Router Archer GXE75 | EasyMesh, HomeShield: $159.99 + $25 off with coupon => $134.99 (Sold and Shipped by Amazon US This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Oh no... here we go again. Tha same sh*t that happaned to Mail & Calendar...
    • I too have worked with pro gear for decades and so I found the interface to be unintuitive from both the pro and casual side (a rare "accomplishment" by what are obviously otherwise skilled coders, hehe). I eventually got it to work, thanks for offering, but I found other compatibility issues with my own use case, so I just dropped it entirely. Right now, I just use an analog line out/line in approach which works as expected across all usage scenarios. With both machines on the same power block/outlet, I'm not getting any analog hum or hiss. My next step will be to try the updated Multiplicity 4 when a bug, addressing this very issue unfortunately, is resolved. Knowing Stardock, that could be tomorrow or five years from now, so I check back every few months to see it it's fixed and I want to upgrade. Again, thanks for offering to help.
    • We recognize that performance can use some improvements, and we continue to work on improving it. However, it's worth noting that massive performance improvements don't happen overnight, they take a lot of work and effort, and in most cases, the improvements are more noticeable when you compare across several updates. That said, Files is open-source and everyone is invited to help with these efforts 🙂
  • Recent Achievements

    • Rookie
      Snake Doc went up a rank
      Rookie
    • First Post
      nobody9 earned a badge
      First Post
    • One Month Later
      Ricky Chan earned a badge
      One Month Later
    • First Post
      leoniDAM earned a badge
      First Post
    • Reacting Well
      Ian_ earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      Michael Scrip
      203
    3. 3
      ATLien_0
      197
    4. 4
      Xenon
      137
    5. 5
      +FloatingFatMan
      115
  • Tell a friend

    Love Neowin? Tell a friend!