Recommended Posts

if you want to make a graphic area 1 x 40, you would make your graphic area and then open up your config file and manually edit it

or if you already have a graphic area, under Graphic Area Settings, on the right is the option to Use Border

check that and you can set the border for top, bottom, left, & right of that particular graphic area

Both meters are for the Network. The top two are the current data rates (sending and receiving). I'm still working on those two. The bottom two are the TOTAL that has been moved across the net (sent and received). This meter is built in to samurize.

Anybody know how to configure the top two meters? Are they separate scripts altogether?

Here's my first crack at it...

ss.png

Registered with this forum because of thread. Thanks to all for the info I have recieved so far.

Quick question though. When I try to modify Judges config file via the Config program, it wont open it and just says

Waiting... an the bottom of the window. What am I doing wrong?

ok this is smiffy's config. i got it from another thread only i can't find it now :p . anyway this is the first time i have used samurize so i have no idea how to set it up. i've got it working and all but a few things aren't displaying any data. can u tell me how to get it working? take a look at the screenshot below. thx :D

post-45-1042585455.jpg

Both meters are for the Network. The top two are the current data rates (sending and receiving). I'm still working on those two. The bottom two are the TOTAL that has been moved across the net (sent and received). This meter is built in to samurize.

Anybody know how to configure the top two meters? Are they separate scripts altogether?

Here's my first crack at it...

http://www.auburn.edu/~smitjel/images/ss.png

How do you get the progress bars to separate like that into different segments?

ok is your computer names \\RICKYSCOMP\ - that is all the way through the config - as a start if that is not your computers names - I would use Notepad and replace that with your system name

Next ...

Does this sort of line ...

\\RICKYSCOMP\Network Interface(Realtek RTL8139 Family PCI Fast Ethernet NIC)

...

refer to a NIC in your machine? Cos that is in loads of the meters too - and again if that is not a) your machine and b) the NIC in your machine you'll have a problem - for the volume of changes that you are talking about - I would use Notepad to open the INI file and make the changes

In addition to the above kind of line - there are a few references to ...

Realtek RTL8139 Family PCI Fast Ethernet NIC

again the same applies

HTH (If not PM me or post here and I'll take another look)

DavidM

PS I got the config going on my machine just fine

Ravager - download Judge's config - on one of the earlier pages - the meter is not one - but is five - with the first one show values from 0 -20, the second showing values from 20 - 40, the third showing values from 40 - 60, the fourth showing 60 - 80 and the last showing 80 - 100 - it is a really smart way of doing things - download his config and it'll all be clear(er)

DavidM

:yes: alright thanks alot. i changed the name to my name in the config and that got the cpu graph working. the bandwidth one is still not working though. i dunno if it's configed to my modem or not it look like the same one. here is a pic. i'm probably just doing smth really simple and stupid wrong but i've never used this before and have no idea how to set it up. thanks alot again for ur help. :p i modified this post so i'll have to put the pic in another one

Edited by Ji@nBing

Yeah that looks like the right card type ... for a NIC ... is that your modem though (do you have a modem and a NIC in there?) - have you tried just changing one of the meters via the config editor to match your machine and then openning the INI in Notepad to see the changes?

And now for me :sleep: :sleep: :sleep:

anyone using the getquote script from the samurize site?  I put the script on both of my computers.  Somehow on my laptop, the quotes update and on my computer it doesn't.  Both of the scripts are exactly the same so are the configurations.  Whats with that?

Reload the config a couple of times. Sometimes my weather script would just show what was already written to the temp file and not show the current weather. I could reload it and it would sync back up...I don't know...I'm just a noob with this thing :blink:

ok this is smiffy's config. i got it from another thread only i can't find it now :p . anyway this is the first time i have used samurize so i have no idea how to set it up. i've got it working and all but a few things aren't displaying any data. can u tell me how to get it working? take a look at the screenshot below. thx :D

What font are you using there Ji@nBing?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Apple is expanding Private Cloud Compute beyond its own data centers by Pradeep Viswanathan At WWDC 2026, as part of the improved Apple Intelligence capabilities, Apple today announced that it is expanding Private Cloud Compute (PCC), its privacy-focused cloud infrastructure for Apple Intelligence, beyond its own data centers for the first time. Private Cloud Compute was designed to handle Apple Intelligence requests that are too complex to run fully on-device. The PCC system does not store user data and does not allow Apple or anyone else to access user requests. Last year, Apple also expanded its Security Bounty program with rewards of up to $1 million for researchers who could find serious vulnerabilities in PCC. Until now, Apple's PCC data centers were using Apple's own silicon. As part of the expansion, Apple is working with Google and NVIDIA to run new Apple Intelligence workloads on Google Cloud systems powered by NVIDIA GPUs. Apple will be using this new infrastructure to execute more demanding AI tasks while maintaining the same privacy and security guarantees of PCC. The new implementation uses NVIDIA Confidential Computing with NVIDIA GPUs, Intel CPUs with TDX, and Google’s Titan chip. Apple says it has worked with Google to build additional protections beyond a traditional confidential computing deployment. Despite the expansion to third-party data centers, Apple claims that its core PCC requirements remain unchanged, including stateless computation, no privileged runtime access, non-targetability, and verifiable transparency. The company highlighted that it will continue to control the PCC software stack, and Apple devices will only trust PCC software that has been cryptographically approved by Apple. To take security to the next level, Apple mentioned that it is maintaining an append-only ledger of Google Cloud hardware that is part of the PCC fleet. The company claims this will help reduce the risk of supply chain attacks. In addition to AI infrastructure, Apple also worked with Google to use technologies behind the Gemini family of models to build the next generation of Apple Foundation Models to power Apple Intelligence features across on-device and cloud workloads. As expected, for more demanding AI tasks like agentic tool use and complex reasoning, Apple will rely on the expanded PCC infrastructure running on Google Cloud. The expansion of PCC on Google Cloud will gradually ramp toward the full set of protections during the summer preview period. As before, Apple will also publish binaries for public inspection, provide research tooling, and give researchers access to live PCC nodes in research mode through the Apple Security Bounty Program.
    • my problem with outlook (new) is that it connects only to outlook.com. all connections to external providers goes through there. Got your mail server and want to use imap directly? no way... it adds a connector on outlook.com. last bug; if your email on an external provider if the same as principal email of your microsoft account, it doesn't work...
    • It's the only reason I finally have an iPhone (for work) and enjoy using it so much that I'm tempted to move from android next time I need to replace my own device
    • So is Russia, China, Iran, North Korea, just to mention a few. What's your point? Everyone is a threat from their enemies' perspective. I'd say that Israel is only a threat to their immediate enemies like Hamas, Hezbollah and the Iranian regime, not to anyone else.
    • The government is not the good guy either. You propose 99% of people require that the government overreach and govern their freedom of information and privacy, while ignoring the government is made up 100% of people, of which 99% are (as you described) brain dead. You can't have both. The reality is Signal is absolutely right and the government is doing what it has always done. Ignoring that we are their boss and grabbing all the power they possibly can to make sure we aren't. Your (societies) ###### parenting is not reason enough as to why I can't have a safe platform for my data/information. Thinking the government is helping is precisely what they are targeting psychologically to take suckers like you for a ride. "Think of the children" was, has, is, and will always be a mechanism of control. In the rare occasion it's actually essential the mass consensus has always been there and it doesn't become a debate.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      222
    3. 3
      ATLien_0
      92
    4. 4
      +Edouard
      86
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!