• 0

Darik's Boot and Nuke Vs Kill Disk?


Question

14 answers to this question

Recommended Posts

  • 0
  stardom744 said:
Which is better? I plan on using dban then afterwards, use killdisk to erase the harddrive then give to my sister.

Overkill. Or does your sister work for the NSA /Homeland security or someother security governmental organization so you has the resources to recover and you have data stored of national importance that she is going to waste the time to try to recover?

  • 0
  stardom744 said:
Which is better? I plan on using dban then afterwards, use killdisk to erase the harddrive then give to my sister.

using killdisk is pointless if you are going to use DBAN

if you want that much security just select the -guttman overwrite- in DBAN

  • 0

DBAN is great, but has problems with SCSI RAID arrays. DBAN is better suited for SINGLE, JBOD and Master/Slave arrangements. Killdisk 4.1 (the CD/DOS-bootable version) takes care of RAID-0 arrays (and presumably RAID-1 and RAID-5) with ease. SO, if your nukeing workstations, you'll probably be OK using DBAN to wipe IDE, EIDE, PATA and SATA, but get Killdisk to take care of those interfaces AND your SCSI controllers that don't support SINGLE or JBOD.

  • 0

"then give to my sister. "

QFT - "Overkill. Or does your sister work for the NSA"

Its your sister, as a courtesy to her so she doesn't find any of your "cute kitty pictures" I could see doing a "clean" install of whatever OS your running. And to make sure it is clean of any malware, etc. But to be honest I really don't see the point of doing any sort of zero write to the drive.

A normal clean install would remove all pointers to anything of yours what so ever, be it websites you visited your "kitty" pictures, and the like. Sure without a zero write it would be possible for her to run some undelete software and recover any files not overwritten in the install of the OS files as you do the clean install. if its just a data drive, then a simple format would be more than sufficient when giving the drive to a family member. Unless you think your sister might go looking for your kitty pictures?

But since your giving it to family the zero write is clearly overkill -- unless of course she is working for a gov agency and your hiding something said agency shouldn't know, or maybe its the other way around and you store the US Arsenal Launch codes on your system?? And you suspect your sister is a member of some terrorist org? ;)

  • 0

Ehh, it's not a bad idea to do a zero overwrite on the disk before you give it to someone else. You never know what they'll end up doing with it, or whose hands it'll be in. It could be considered overkill, but if you have anything that you consider sensitive, it's good practice regardless. Now, DBAN should have plenty of options to wipe the disk as quickly or as thoroughly as you'd like. I don't see what using two apps would do to make it more secure than just using DBAN at your chosen security level.

  • 0

Those damn spambots ;) Normally I check post dates, maybe we could get a feature where if start of thread is over X number of days it warns you of that before you post ;) Something like thread was start X days ago, sure you want to post..

  • 0
  On 17/01/2012 at 21:08, BudMan said:

Those damn spambots ;) Normally I check post dates, maybe we could get a feature where if start of thread is over X number of days it warns you of that before you post ;) Something like thread was start X days ago, sure you want to post..

Wouldn't be difficult to implement, and I think it's a great idea. Just a red banner that pops up when a topic is very old. Probably even better if it recognizes that there was a large gap between posts, that way it wouldn't be triggered for long lasting threads.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft 365 Copilot Notebooks now integrated in OneNote on Windows by Paul Hill Microsoft has announced that Enterprise customers with Microsoft 365 Copilot, SharePoint, or OneDrive licenses can now use Microsoft 365 Copilot Notebooks integrated directly with OneNote on Windows. Copilot Notebooks are AI-powered and bring together different resources such as Copilot Chat, files, notes, and links into a single space to make you more productive. The Redmond giant wants to make it easier for customers to gather content, understand complex topics, and create “smarter content” with Copilot Notebooks. This integration is squarely aimed at Enterprise customers, not Personal or Family subscribers. How Copilot Notebooks enhance productivity in OneNote When you open OneNote on Windows, you should see Copilot Notebooks in the left-hand sidebar, from here you can view or edit existing notebooks or you can create one by going to Home > Create Copilot Notebook or New notebook. During the creation of your new notebook, you can give it a name and add references such as OneNote pages, .docx, .pptx, .xlsx, .pdf, or .loop files. This gives Copilot extra context to provide you with more refined answers. Once you have created a notebook and added your reference documents, you can use Copilot Notebooks to help you gather insights from your documents, draft summaries, and generate audio overviews. An important caveat to mention about these notebooks is that you can only add 20 files as references and only individual OneNote pages, as opposed to sections and notebooks, can be added. Microsoft could add support for these in the future, but you can’t add them yet. Another limitation right now is that some OneNote features aren’t functional within Copilot Notebooks, including tags, section groups, inking, templates, password protection, Immersive Reader, and offline support. Availability and what it means for enterprise users Microsoft 365 Copilot Notebooks in OneNote for Windows are available for Enterprise customers with an appropriate license (anyone with a Microsoft 365 Copilot, SharePoint, or OneDrive license) running OneNote Version 2504 (Build 18827.20128) or later. If you have any other feedback to give to Microsoft, you can give it via Help > Feedback. As an Insider preview, Microsoft will likely improve this before declaring it stable so let Microsoft know of any issues you have. Now that the feature is available as a preview, it’s the perfect time for IT admins and other decision-makers to evaluate the feature to see how it could benefit their wider organization.
    • Mixxx 2.5.2 by Razvan Serea Mixxx is powerful, free, and open-source DJ software designed for both beginners and professionals. It offers real-time beatmatching, auto DJ, effects, and MIDI controller support. With a clean interface and compatibility across Windows, macOS, and Linux, Mixxx is ideal for live performances, radio broadcasts, or practice sessions. Its active community and constant updates make it a reliable tool for any DJ. Mixxx integrates the tools DJs need to perform creative live mixes with digital music files. Whether you are a new DJ with just a laptop or an experienced turntablist, Mixxx can support your style and techniques of mixing. Mixxx key features: Realtime audio engine with low-latency performance MIDI and HID controller mapping with customizable scripting (JavaScript-based) Vinyl DVS support (absolute & relative timecode modes) OpenSL, ASIO, WASAPI, and JACK audio backend support Advanced BPM & musical key detection (KeyFinder integration) Quantized beat sync and phase locking Effect chain routing with LADSPA plugin support 4-deck mixing with independent EQ and gain control Support for wide file formats (MP3, FLAC, OGG, WAV, AIFF) Broadcasting via Icecast and Shoutcast with metadata support Library with Crate, Playlist, and Smart Playlist organization Multi-core CPU support for performance optimization Microphone and Auxiliary input routing with talkover ducking OSC and Web MIDI support Skinnable and themable Qt-based UI Cue points, hotcues, and looping with quantization Recording in lossless WAV or compressed formats Clock-synced looping and beatjump Mixxx 2.5.2 changelog: Library Fix playlist export when name contains a dot Fix loading the wrong track via drag and drop when using symlinks Fix: byte order in hotcue comments imported from rekordbox Tracks table: show ReplayGain with max. 2 decimals, full precision in tooltip Fix keyboard mappings with non-ASCII characters on Linux Computer feature: enable initial sorting during population Computer feature: avoid false-positve 'has children' for non-directory links Fix column header mapping when using external library Fixed Single track cover reload on reload metadata from file Controller Mappings Arturia KeyLab Mk1: initial mapping Denon MC7000: slicer mode TypeError Denon MC7000: crossfader curve using wrong parameter DJ TechTools MIDI Fighter Twister: support 4 decks Hercules DJControl Inpulse 500: the crossfader was not reaching 100% to the right end Icon Pro Audio iControls: initial mapping Numark Mixtrack Platinium FX: Fix 4 steps browsing issue Traktor Kontrol S3: Use GUI config for settings Traktor S2 MK3: Fixed LED issue Traktor S4 MK2: Use engine settings API for configuration Traktor S4 MK3: prevent sync lockup, add setting for tempo center snap Controller Backend Control picker: Allow to learn MIDI Aux/Mic enable controls Make [Main],headSplit CO persistent across restart Fix MIDI Controller button learning Fix learning with "No Mapping" selected Unit tests for engine.beginTimer engine-api.d.ts: brake()/spinback() documentation Target support Fix building with a CMake multi-config setup Fix building with gcc >= 14 with LTO and clang >= 19 (fpclassify) Fix: gcc -Warray-bounds= in fidlib by using a flexible member Added Linux Mint Codenames to debian_buildenv.sh Add hidden [Config],notify_max_dbg_time setting to reduce warnings in developer mode Detect arch and fail early if not supported when installing buildenv Misc Vinyl Control: Reduce sticker drift Fix infinite number of pop ups of the "No Vinyl|Mic|Aux|Passthrough input configured" dialog Reduce CPU usage with Trace log messages Fix adjust Gain after adopting it as ReplayGain only in requesting playe Skins: add loop anchor toggle to Deere, Shade, Tango Sound Hardware preferences: add manual link for Mic monitoring modes Work around an Ubuntu, Ibus or Qt issue regarding detecting the current keyboard layout. Fix BPM rounding for the 3/2 case Update cue & play indicators on paused decks when switching cue mode Download: Mixxx 2.5.2 | 113.0 MB (Open Source) Links: Mixxx Home page | Other OSes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • KDE brings Wayland PiP to Plasma 6.5, adds finishing touches to 6.4 as release nears by David Uzondu The KDE team has released its This Week in Plasma update, showing the final polish being applied to Plasma 6.4 ahead of its June 17 release. Last week, the KDE team brought performance upgrades, and this week the team is continuing that with improvements like faster loading for System Monitor components in Plasma 6.4. Future work for Plasma 6.5 is already underway, and it includes a feature that many have probably been waiting for: proper Picture-in-Picture support on Wayland. This uses an experimental version of the Wayland PiP protocol, which means applications like Firefox that also implement it can finally display PiP windows correctly. It is a long-overdue addition that moves the Wayland session closer to feature parity with X11. The devs also merged KWin's Background Contrast effect into the Blur effect. Virtual desktops can now be re-ordered from the Pager widget, a feature previously missing. Invert and Zoom settings have been moved into the Accessibility page, which is a more sensible place for them than the Desktop Effects page was. The team also brought consistency to the Breeze application style, with animated effects for checkboxes and radio buttons now working in QtQuick-based apps. Other small cleanups include standardizing the section headers in the Disks & Devices, Networks, and Bluetooth widgets. For those who do a lot of screen recording, Spectacle now makes it much clearer how to stop a recording, both in its notifications and shortcut names. As for the immediate future, Plasma 6.4 and its first point release are getting accessibility and user interface tweaks. The team improved text contrast for labels used in secondary roles throughout Plasma, making things like brightness indicators much easier to read. The Kicker Application Menu in 6.4 can now scroll horizontally when a search returns a ton of results, so you can actually see all of them. The team also delivered some stability improvements in Plasma 6.4.0, most notably fixing a long-standing issue where adding widgets to oversized panels could freeze the entire shell. Discover also got a much-needed fix for a crash that occurred when suggesting replacements for unsupported Flatpak apps. On the usability side, dragging files into a Folder View widget no longer causes glitchy visuals, and Open and Save dialogs from Flatpak-based browsers now properly allow the preview pane to open. Printing from Flatpak GTK apps now respects correct sizing, and installing or removing apps no longer wipes out your search input in Kicker or Kickoff while you're using it. Other notable fixes include: Selection rectangles on the desktop now render properly when using custom fonts or sizes (Plasma 6.3.6) A crash in System Monitor charts used by apps and Plasma components has been resolved (Frameworks 6.15) Switching process views in System Monitor no longer causes crashes (Frameworks 6.16) Open and Save dialogs no longer close when hovering over specific files (Frameworks 6.16) A thumbnailer crash on X11 caused by certain widget styles has been fixed (KDE Gear 25.04.3) Frameworks 6.15 also speeds up System Monitor by delaying tree view arrow loading There are still 3 high-priority Plasma bugs holding out, and the list of quick-win "15-minute bugs" has grown to 23.
    • Hasleo Backup Suite Free 5.4.2.0 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.4.2.0 changelog: Added backup image delete feature Added storage path management feature Improved file backup feature Show application notifications in Windows Notification Center Various other bug fixes and feature improvements Download: Hasleo Backup Suite 5.4.2.0 | 34.4 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      5i3zi1 earned a badge
      One Month Later
    • Week One Done
      5i3zi1 earned a badge
      Week One Done
    • Week One Done
      julien02 earned a badge
      Week One Done
    • One Year In
      Drewidian1 earned a badge
      One Year In
    • Explorer
      Case_f went up a rank
      Explorer
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      ATLien_0
      227
    3. 3
      +FloatingFatMan
      160
    4. 4
      Michael Scrip
      113
    5. 5
      +Edouard
      98
  • Tell a friend

    Love Neowin? Tell a friend!