Recommended Posts

Don't use this anymore since putting a Netgear ReadyNAS on the network. Although it doesn't transcode MKV files I try and avoid those and if I end up with them I just watch in the bedroom via my Acer Revo and XBMC.

Hey all, lately a few mkv's have been giving me issues while trying to stream them through media server. Specifically they say "Data is Corrupt" and I cannot play them at all. HIt has only been recently, and only a certain few. So does anyone know what is up? A new kind of codec perhaps? Do I have to use mkvmerge or some similar app and do something to get them to work? Up until this point in time never had any real issues with mkv files at all, so the few that did not work in the past I just did not watch. So any help here is appreciated. Is there a newer version of media server perhaps? TIA, DL

Is there an updated guide on how to stream mkv's to a PS3? Or is the OP up to date? I'm sick and tired to trying to get my 360 to play them. They're always skippy and laggy.

PS3 Media Server, and yes i know its PS3 but PS3 and xbox use the DLNA protocol for streaming so it works

Hey all, lately a few mkv's have been giving me issues while trying to stream them through media server. Specifically they say "Data is Corrupt" and I cannot play them at all. HIt has only been recently, and only a certain few. So does anyone know what is up? A new kind of codec perhaps? Do I have to use mkvmerge or some similar app and do something to get them to work? Up until this point in time never had any real issues with mkv files at all, so the few that did not work in the past I just did not watch. So any help here is appreciated. Is there a newer version of media server perhaps? TIA, DL

Install the build from here - http://ps3mediaserver.org/forum/viewtopic.php?f=14&t=8883

Install the build from here - http://ps3mediaserve...php?f=14&t=8883

Thanks AB, gonna give that a whirl today.

' timestamp='1293697852' post='593539912']

Actually I have the same problem with SOME mkv files and I am using the above build from day one!

Interesting, i will post back once I use it a few days and see, I just wish I could remember what mkv's it was, I know I deleted them. wacko.gif

Sometimes the program/computer may need to be restarted. I had a issue with Salt earlier, but a restart somehow solved it.

Hmmm, considering I leave my comp on 24/7 and have not restarted it in weeks, this could be the case. Gonna restart once I install the new build.

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

' timestamp='1293998996' post='593549926']

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

Thanks for the heads up (Y)

' timestamp='1293998996' post='593549926']

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

Thanks for the heads up (Y)

Another new build though

1.20.412-SB10:
  • Added PMSEncoder 1.3.0
  • PMSEncoder engine is applied by default and doesn't need to keep being added to PMS.conf after saves
  • Removed tsp's bugfixes since they were causing playback problems for Bravia users
  • Mac build now supports update.jar/plugins (issue 766) (if anyone wants to build it)
  • Allow pluggable engines (issue 686)
  • Fixed some code indentation
  • Language changes
  • Updated NSIS from 2.42 to 2.46

1.20.412-SB11:

  • Processes killed cleanly on non-Windows operating system (issue 680)
  • Allow custom MEncoder options at renderer level (from here)
  • English language updates
  • Added full changelog (CHANGELOG-SB.txt in the program folder)
  • Removed the iTunes navigation patch from issue 921 since it broke iTunes support for some users
  • Synchronised with the official build, which adds Android support and preliminary virtual folders support
  • Removed patch from issue 595 which allowed an extra file sorting option because it conflicts with the official build synchronisation
  • 2 weeks later...

1.20.441-SB12:

  • Synchronised with official r441 from r414 (Click here for changelog)
  • Support VOBsub subtitles inside MKV files with MEncoder (from here)
  • Bravia 5500 uses MediaInfo now which fixes codec support (feedback is appreciated on this, please)

Any of you guys run into this new Cinavia BS?

The euro release of Salt is protected with it. I tried to play a backup of mine and it ran fine with a DTS soundtrack. Am I missing something ?

Having tried to watch 1080p over the (wired) network it always has the stop and start thing happen would upgrading my router to one with Gbit ports help or is the 10/100 ports enough?

The router should be fine, as my Linksys 10/100 is just fine... unless your router is somehow slower. Is your computer fast enough for 1080p streaming? Mine is, but if there are subtitles, then it isn't.

I kept having issues playing certain movies that PMS would encode them. It added either "Subtitles" or "encoded" to the title and it would start to play and then PMS would crash. Got sick and tired of it so I went back to TVersity... that's a pain too to get it to connect to the PS3.. .ugh.

This topic is now closed to further replies.
  • Posts

    • I do trust Apple probably more than these other companies with certain data, but I also do think (and it has been demonstrated that) Apple pulls a lot of shenanigans and always has for a long time.
    • Does your iPhone support the latest iOS version? Here's the iOS 27 compatibility list by Aditya Tiwari It's that time of year when we get to know about the latest operating system updates for Apple devices. For iPhone, Apple previewed the iOS 27 update at WWDC 2026, where the company finally introduced an upgraded version of Siri. Apple typically supports iPhone models for up to five years. But it has been making exceptions in recent years (read iPhone 11). If you're wondering whether your iPhone is compatible with the iOS 27 update, here is the official list of devices: iPhone 17 Pro Max, iPhone 17 Pro, iPhone 17, iPhone 17e, iPhone Air iPhone 16 Pro Max, iPhone 16 Pro, iPhone 16, iPhone 16 Plus, iPhone 16e iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15 iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14 iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11 iPhone SE (2nd generation), iPhone SE (3rd generation) So, you can download the iOS 27 developer beta on up to 31 different iPhone models. There has been no change to the list of supported iPhones since iOS 26. However, it will expand to include more devices when the iPhone 18 series arrives later this year. To download the developer beta on your iPhone, go to Settings > General > Software Update > Beta Updates. Here, select "iOS 27 Developer Beta" from the list of choices to get the new update. In addition to iOS 27, you can try the developer beta versions of macOS 27, iPadOS 27, watchOS 27, tvOS 27, and HomePod software 27 on your supported devices. iOS 27 comes with improved Liquid Glass, which you can adjust using a new transparency slider. Apple said during the keynote that iPhone apps now launch up to 30% faster, new photos appear in the Photos app up to 70% faster, and AirDrop transfers work up to 80% faster. The new update promises to improve performance on older iPhones by introducing a new CPU Scheduler that supports devices all the way back to the iPhone 11. While iOS 27 is supported on older iPhones, it goes without saying that they'll lack several features due to hardware differences. For instance, iPhone 14/14 Plus and older models come with a notch instead of the Dynamic Island. Similarly, Apple Intelligence features are supported on iPhone 15 Pro/Pro Max and later models.
    • The Radeon RX 9070 XT is right up there with the GeForce RTX 5070 Ti
    • I don't know why someone said useless, but it does have that pesky kernel driver bundled, and it's in perennial turmoil. When it goes bad, it goes very bad, and it's impossible to predict when it will due to system differences. I know that they're in the middle of development for a major new version that will include a completely new driver, one that they expect will largely solve the problem, but that's a ways out and it's unproven at this point.
    • doesn't AdGuard let ads through that pay to be let through?
  • Recent Achievements

    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
    • Week One Done
      jojodbn earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      526
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      +Edouard
      132
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!