Recommended Posts

Wasn't this pinned?

 

 

I agreed with Munky to unpin the thread as I never made a new guide. Most people around here know about UMS so I didn't really think the topic needed to be pinned until I/someone else maybe made a PS4 guide? (once DLNA is added). Thing is it'll probably work 1:1 the same as the PS3 anyway :p

 

Years ago PSMS/UMS were harder to use, and weren't always good at transcoding, now it really is just install, and play. Not much need for a guide IMO.

 

In fact the guide was originally made for MKV2VOB!

 

Sorry, that's my fault. AB and I spoke via PM if he had plans to upload a new version of the guide or create a new one. If you guys still want to make use of this topic then we'll keep it pinned :)

 

@AB, I hope you don't mind but I remembered you posted the guide to another forum and I have copied it back to the OP. It's not perfect, as Neowin as a picture limit (news to me), so I've had to edit the PSP Remote Play section. Hope you don't mind. It's probably not the most recent version you wrote but maybe it'll come in use for someone and will at least be archived now.

Sorry, that's my fault. AB and I spoke via PM if he had plans to upload a new version of the guide or create a new one. If you guys still want to make use of this topic then we'll keep it pinned :)

 

@AB, I hope you don't mind but I remembered you posted the guide to another forum and I have copied it back to the OP. It's not perfect as Neowin as a picture limit (news to me), so I've had to edit the PSP Remote Play section. Hope you don't mind. It's probably not the most recent version you wrote but maybe it'll come in use for someone and will at least be archived now.

 

That's an ooolllldddd guide :P Ah well, nostalgic reasons and all that! Sony better have DLNA support in this months rumoured PS4 FW.

That's an ooolllldddd guide :p Ah well, nostalgic reasons and all that! Sony better have DLNA support in this months rumoured PS4 FW.

 

Yeah I figured it would be. As you say though, it's more straight forward now than it was to begin with (Y)

Universal Media Server v3.3.0: Mac / Windows / Linux

This release lets you further customize your server name, automatically muxes more types of files, improves video compatibility, especially on Panasonic TVs, and more!

  • General:
    • Added the option to toggle the display of the profile name after the server name on the renderer
    • Added a warning on the Status tab if the UMS port is being blocked
    • Added some missing entries to UMS.conf
    • Added automatic video scaling to renderer resolution limits in FFmpeg
    • Added the ability to use asterisks for the "Force transcoding" and "Skip transcoding" options
    • Added config option "itunes_library_path"
    • Improved detection of which videos should be muxed automatically when using MEncoder or FFmpeg
    • Fixed files with compatible video but incompatible audio not muxing video
    • Fixed support for outputting 24-bit FLAC files as 24-bit by muxing them with video
    • Fixed audio playback if VLC is enabled
    • Made server restarts more reliable
    • Made sure FFmpeg outputs a compatible colorspace when transcoding to H.264
    • Made sure the transcode folder appears before files instead of after (below)
    • Renamed config setting "ffmpeg_font_config" to "ffmpeg_fontconfig"
    • Renamed config setting "hide_new_media" to "hide_new_media_folder"
  • Renderers:
    • Improved video compatibility on Panasonic TVs
    • Updated the PS3 image
    • Updated the XBMC logo
  • Languages:
    • Minor language tweaks
    • Renamed "Advanced Monitoring" to "Include in New Media folder"

 

 

Upgrade Notes:
For all versions below 3.2.0: If you have enabled FFmpeg's fontconfig or hid the New Media folder, you will need to re-apply those settings.
For all versions below 3.0.0-b1: It is recommended to delete your UMS.conf file prior to installing this version. Windows users can choose the "clean install" option while installing instead.

If it actually works, I might have a reason to start using my PS3 again for something other than a dust collector!

 

It works great, simply passes AC3 audio straight to your receiver like with DTS. I guess if you have any cinavia protected MP3 audio content you'll simply need to transcode to AC3 before playing - Not that the transcoding matters audio quality wise here, if you're playing an audio track in MP3 I'm going to guess it's a 'cinema' copy ;)

It works great, simply passes AC3 audio straight to your receiver like with DTS. I guess if you have any cinavia protected MP3 audio content you'll simply need to transcode to AC3 before playing - Not that the transcoding matters audio quality wise here, if you're playing an audio track in MP3 I'm going to guess it's a 'cinema' copy ;)

Guess I'll have to wait til it makes it into a normal build to see if it works with my awful setup.

Guess I'll have to wait til it makes it into a normal build to see if it works with my awful setup.

 

I'll upload my build just now!

 

Here (has the cinavia AC3 removal) - https://dl.dropboxusercontent.com/u/10631352/UMS.exe

Thanks for the upload. Now time to acquire some media with cinavia on it. :shifty:

 

Definitely works. Only reason it wouldn't is if your home receiver somehow picks up on cinavia? (don't even know if there are any that do).

 

Seen DirtyLarry around NW again, I'm sure this will make him happy!

Definitely works. Only reason it wouldn't is if your home receiver somehow picks up on cinavia? (don't even know if there are any that do).

 

Seen DirtyLarry around NW again, I'm sure this will make him happy!

Well that's the reason I called it my "awful setup." I don't have any of the fancy dodads to send the signal to my TV, It's literally just my PS3 plugged directly into an HDMI port on my TV. Then once I found out about all this cinavia junk, I darted through the internet trying to find a fix for the PS3 (a setting or workaround for the media) and found nothing that worked. Scraped together enough money to buy a used WD TV Live that ignores cinavia just to watch anything and it was smooth sailing from then on out.

 

So if all of this works, It'll be nice to have a reason to use my PS3 again and go back to making the coverart thumbnail things to make it look nice. If not, WD TV here I come.

Definitely works. Only reason it wouldn't is if your home receiver somehow picks up on cinavia? (don't even know if there are any that do).

 

Seen DirtyLarry around NW again, I'm sure this will make him happy!

If receivers picked up Cinavia they'd refuse to play back nearly any Bluray.

 

Cinavia is meant to be triggered at the 'source', the player decoding the file.

If receivers picked up Cinavia they'd refuse to play back nearly any Bluray.

 

Cinavia is meant to be triggered at the 'source', the player decoding the file.

 

Ah right! I had an update for my Panasonic receiver to remove cinavia but I didn't click till know it will be in regards to the in-built media/blu-ray player.

  • 3 weeks later...

Made a slightly newer build for everyone, still no official build - https://dl.dropboxusercontent.com/u/10631352/UMS.exe

 

This is now based off of 3.4.0

This topic is now closed to further replies.
  • Posts

    • ABP has become "old news" when MV3 started rolling out. They've gone downhill and is now simply irrelevant..... in my experience.
    • About two years ago, I switched to Brave and haven't looked back.
    • FWIW StatCounter has been trash for over 25+ years! Back in the day (circa 2000 and GeoCities pre-Blogger era), it was useful to paste a number on your webpage indicating how many visitors you had. In the ensuing 25+ years, they've grown in reputation and changed their ways... but their overall consumer value has remained abysmal. Serious marketing agencies only cite StatCounter when there's literally no other sources available to support any marketing claims! They are the absolute lowest threshold serious companies use to push any sort of narrative about this-or-that happening. Besides their credibility being what it is, they are forever subject to quality issues. They're so bad that my DNS-level ad-filter prevents me from even viewing their main website! HA!
    • Microsoft had to shut down 70+ GitHub repos after getting hacked, brings back some by Aditya Tiwari The self-replicating malware campaign known as Miasma took the open-source world by storm. It was reported that almost 73 Microsoft GitHub repositories were infected by the worm and had to be temporarily shut down to determine how attackers compromised projects and stuffed password-stealing malware in the code. These GitHub repos span across different organizations, including Microsoft Azure, Azure-Samples, Microsoft, and MicrosoftDocs. The malware enabled attackers to steal passwords and credentials when compromised tools were opened in popular AI coding apps, including Claude Code, Gemini CLI, VS Code, and Cursor. The security firm Cloudsmith, malware analysis site OpenSourceMalware, and 404 Media were among the first to report the hack. For background, Miasma is a variant of the Mini Shai-Hulud worm, open-sourced by the threat group TeamPCP. It started its journey by compromising a Red Hat employee's GitHub account to attack the @redhat-cloud-services npm namespace. Earlier this month, Microsoft Threat Intelligence reported that the Miasma attackers published 32 malicious packages across more than 90 versions under the @redhat-cloud-services npm scope to steal cloud credentials. The worm didn't take long to start attacking source repos directly rather than package registries. It is known to skip the npm registry entirely for several targets and plant malicious code straight into public repos like "icflorescu/mantine-datatable." The delivery approach was designed to weaponize AI coding tools. Miasma's malicious payload embedded into projects can trigger automatic code execution when the infected repo is opened in an AI coding tool or IDE. The list of affected projects includes "durabletask", a Python package compromised by TeamPCP a month earlier to deliver an information stealer designed for Linux systems. That said, Microsoft has begun restoring some repos affected by the malware campaign, The Hacker News reports. A company spokesperson stated the following: Microsoft will continue to investigate the attack. It has notified a small number of customers who may have removed their content from the affected repos. The company will reach out to customers again through established support channels "if anything further is identified that requires customer action."
    • Why is Opera doing this notification at all? They have their own extension store. They don't have to obey anything dictated by Google. Others like Brave and Vivaldi that rely on Chrome's extension store, not so much. Firefox is entirely separate as well with its own extensions store. I honestly don't understand why entire world is just insisting on Chrome. Like, why? It's a stupid fat browser with barely any functionality. But sure, it's installed on everything by default. I don't understand how people even use web that's filled with tracking garbage and ads all over the place.
  • Recent Achievements

    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
    • One Year In
      jojodbn earned a badge
      One Year In
    • One Month Later
      jojodbn earned a badge
      One Month Later
    • Week One Done
      jojodbn earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      531
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      +Edouard
      131
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!