GPU temp - 74c Idle - Is this normal?


Recommended Posts

I had temperatures of around 89 degrees idle on my GPU using my stock heatsink for my card, and I since installed an Arctic Cooling Accelro X1 cooler, which lowered my temp to 74 degrees on the GPU and 46 on the chip..Well ATiTool says "temperature of temp chip"..Not sure what that is.

Anyways, are these temperatures perfectly acceptable for an idle PC? This is with the side of my case closed, and the three case fans blowing.

Note: The card is a BFG 6800GT.

I should mention we're on the third floor apartment so with heat naturally rising, I felt I should mention that.

Link to comment
https://www.neowin.net/forum/topic/663012-gpu-temp-74c-idle-is-this-normal/
Share on other sites

I don't have the numbers for GPUs memorized off the top of my head, but like processors, the load temperature is the only one that's important. You figure that and your ambient temperature out while I see what I can find on what the 6800's are good till.

Googled around, Nvidia's released specs for their newer cards..but the older cards don't have anything. I found a review where a shot of the driver showed that 125?C was the "Core slowdown threshold"..however the box looked editable. Anyway, I can't seem to find this stuff, I'd say under triple digits and you're fine.

Alright, thanks for searching around. The highest it got was 85 degrees in WoW, but it was mostly sitting at 81....Considering before I put this cooler on and I had only one working fan on the stock heatsink the temperature went up to 106...I'd say this is a vast improvement heh.

Now I'm amazed I can play CoD4 at 1024 on this card without it over heating.

Edit: Yeah Mystic this is true...But I'm using a cheap Orion PSU, this room in the apartment is one of the hottest, and it's been pretty damn hot lately. I'm hoping those are all big contributing factors. I hope.

I'm actually starting to wonder if ATiTool is giving me an inaccurate number. I just started a stress test with a program, and the card got up to 91 degrees, but as soon as the program closed (really, there was barely any delay) the card dropped to 75 degrees. I couldn't imagine a 16 degree drop in a matter of seconds. Then again, I could be wrong.

I came across other 6800gt users saying their card was at 55 degrees. This is factory overclocked too but I couldn't see it making a 19 degree difference. Although..Maybe I should have mentioned that earlier? >_>

Edited by DigitalManifestations
Well, I got GPU-Z and it's telling me my fan speed is only at 53 percent...That may be part of the problem. Of course, I have no option to change the fan speed in my nVidia control panel.
Get riva tuner.

Riva Tuner should be able to do it. Here's a guide on how to configure v2.09 http://www.vaguetech.com/index.php?pageid=rt207 the one at guru3d doesn't quite have the updated guide.

Thanks for the link Crash.

I'm at 73 idle with the fan at 100 percent, and 78-79 while gaming. It's definitely an improvement. I'd like it to be at 55-60 but like I said, other things may be a factor too such as how hot the apartment is, cheap PSU etc etc.

Thanks for the link Crash.

I'm at 73 idle with the fan at 100 percent, and 78-79 while gaming. It's definitely an improvement. I'd like it to be at 55-60 but like I said, other things may be a factor too such as how hot the apartment is, cheap PSU etc etc.

No problem, glad to help. You can set fan speed profiles if you want, that way once it reaches a certain temp (that you can specify) the fan will adjust it's self based on temperature. Or you can just max the fan speed out, if you can stand the noise. :laugh:

Ambient room temps will have a impact. You can try improving airflow inside the case by routing wires/cables out of the way.

No problem, glad to help. You can set fan speed profiles if you want, that way once it reaches a certain temp (that you can specify) the fan will adjust it's self based on temperature. Or you can just max the fan speed out, if you can stand the noise. :laugh:

Haha. I'm just leaving it at 100. It's actually surprisingly quiet at 100 percent speed.

I am running BFG 6800 Ultra OC, it idle at 62 C. Last month it was idling at around 78-80 C. I took apart the heatsink, cleaned everything and applied Arctic Silver 5. All the heat pads above memory chips was almost gone due to melting of the pads..

Yeah, I cleaned the entire card and the new cooler just came in today, it was spotless. Can dust in other components and fans other than that on the GPU play a role in GPU temperatures?

Ambient temperatures can. As well as other components generating heat that is not being removed by exhaust fans which will subsequently raise your case temperatures which could lead to high GPU temperatures.

Is your CPU having any temperature problems?

Yeah, I cleaned the entire card and the new cooler just came in today, it was spotless. Can dust in other components and fans other than that on the GPU play a role in GPU temperatures?

It can if it's on the case fans. It'll reduce the flow of air somewhat, how much of a difference it'll make, I haven't got a clue.

Ambient temperatures can. As well as other components generating heat that is not being removed by exhaust fans which will subsequently raise your case temperatures which could lead to high GPU temperatures.

Is your CPU having any temperature problems?

This is the first time I've looked at CPU temps...So I'll just post what Speedfan says.

I should note that Speedfan is telling me my GPU is 19 degrees...And it drops to 0 as well heh.

post-45347-1219987172_thumb.jpg

  • 2 weeks later...

I had a similar problem with my 6800GS. When playing GRID the temp would go up to 125C then hit its emergency 'holy crap' mode and slow the hell down to stop it from frying itself.

I took the card out, took off the air duct, and noticed there was a VERY thick wall of dust between the heat sink and the fan (nowhere near the GPU itself) which was stopping any air from the fan from reaching the heat sink. I clean it all up, put it back together and now it idles at a comfortable 41C.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I have not even heard of that game. will take a look
    • Chasys Photo 5.41.01 by Razvan Serea Chasys Photo is a suite of image editing applications including a layer-based image editor with adjustment layers, linked layers, timeline and frame-based animation, icon editing, image stacking and comprehensive plug-in support (Chasys Photo Editor), a fast image viewer (Chasys Photo Viewer) and a fast multi-threaded image file converter (Chasys Photo Converter) , with RAW image support in all components. It supports the native file formats of several competitors including Adobe Photoshop, Affinity Photo, ArtWeaver, Corel PhotoPaint, FireAlpaca, GIMP, Krita, Paint.NET, PaintShop Pro and Pixlr, and the whole suite is designed to make effective use of multi-core processors, touch-screens and pen-input devices. Designed under the mantra of “unique, flexible and powerful”, Chasys Photo takes a radically different approach to image editing with the aim of opening up new possibilities for those who dare to be different. Chasys Photo key features: Free-style layering with blending modes Adjustment layers with multiple adjustments per layer Linked layers (a.k.a Linked Smart Objects) Composite, Image List, Frame Animation and Object Animation image modes Animation, both frame-based and object-based (timeline animation) Animation Composer engine Image Stacking for noise reduction, super-resolution, etc. Tablet/Pen-input/Stylus support with pressure control Touch-screen support with gestures including pitch-to-zoom and multi-finger panning Support for the native formats of Adobe Photoshop, Affinity Photo, ArtWeaver, Corel PhotoPaint, FireAlpaca, GIMP, Krita, Paint.NET, PaintShop Pro and Pixlr Support for common formats such as JPEG, animated PNG, animated GIF, TIFF, PICT, WebP, HEIF, DDS, JPEG-2000, JPEG-XR, JPEG-XL, AVI video, etc. Support for the OpenRaster interchange file format and rare formats such as QOI, MNG/JNG and DPX Support for older formats such as PPM/PGM/PBM, PCX/DCX, PCD, TGA, COKE, etc. Comprehensive Camera RAW file support with live adjustment Extensive plug-in support with streamlined SDKs Support for Photoshop Filter Plug-ins (.8BF) Advanced printing and scanning engines PDF document generation Icon and cursor editing, import and export, including Vista-style and Mac-OS icons Screen Capture, including Video Screen Capture with multiple triggering modes Video capture from devices (e.g. TV/Video) Supports multi-core processors, High-DPI displays and Multiple Display setups Integrated File Browser, Bluetooth OBEX and in-built utilities (Calculator, Notepad) Shell integration with thumbnails and conflict detection Unlimited Undo/Redo and Asynchronous Auto-Save, with Just-in-time memory compression to save space Fully re-editable text with advanced styling and effects (TextArt) Full alpha channel through out the workflow with Alpha protection (a.k.a. transparency protection) Multiple language support with user-editable language files and translation assistant (Chasys Photo Language Studio) Anti-aliasing and super-sampling support in tools and paths* Smart-resizing (similar to seam-carving) Best-in-class post-edit heuristics anti-aliasing engine Physical measurement specification with display size detection via EDID Uses the latest CD5 specification with animation and multi-resolution Super-fast internal graphics engine (JpDRAW2) Full UNICODE support in all components Metadata save, restore and scale to imitate vector art Configurable Guides and Grids with Snap-to-Grid Smart-dither to custom palette Asynchronous preview rendering engine Pantone equivalent palettes for PMS 100 to 814-2x Automatic color naming ... and many more! Chasys Photo 5.41.01 changelog: New Features Layered images with multiple pages (Composite/Multi-page) Additional templates to support template-centric workflow New Layer Blend Mode: Inverse Luma Mask Horizon detection in Rotate Transform Cropping option when importing video Orientation options in QR Code Generator plug-in Solved angle ambiguities (CCW versus CW) Internal Improvements Improved graphics engine (JpDRAW2™ v26.05) Improved CD5 codec (v4.10, improved ACSC compression) Improved interpolation when downsizing images Improved motion detection in Video Capture Slightly lower memory usage (RAM is getting expensive!) File Support and Bug Fixes Improved PXZ file support (placeholders, blanks) [bug-fix] Memory leak in flt_JPEG.dll Download: Chasys Photo 5.41.01 | 46.1 MB (Freeware) View: Chasys Photo Home Page | Wikipedia Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • We don't need stars for the word, just use the word "CSAM"
    • If they want to do business in the UK then they can't ignore it. thats why Imgur pulled out of the UK
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      220
    3. 3
      ATLien_0
      92
    4. 4
      +Edouard
      90
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!