NEVER85 Posted May 14, 2009 Share Posted May 14, 2009 This is an issue I came across after installing the RC of Windows 7. Sometimes it wouldn't appear but now it happens all the time. Whenever I turn off my monitor and turn it back on, my resolution would be changed to 1280x1024 instead of my native 1440x900. I wouldn't be able to change it back via Windows settings or by the nVidia Control Panel. The only way I would get my default resolution back is to reboot, but the problem would just resurface if I turned my monitor off and back on again. Has anyone else had this issue, and if so, is there a fix available? I'd appreciate any help on the matter. Link to comment Share on other sites More sharing options...
Lord Ba'al Posted May 15, 2009 Share Posted May 15, 2009 When I turn off my monitor and back on, it's still the same resolution (1920x1200). Ati Catalyst drivers thought, so it might be a nVidia driver issue. Link to comment Share on other sites More sharing options...
O.G Posted May 15, 2009 Share Posted May 15, 2009 Is the setting for scaling in the Nvidia control panel set to use the monitors built in scaling? Link to comment Share on other sites More sharing options...
NEVER85 Posted May 16, 2009 Author Share Posted May 16, 2009 Is the setting for scaling in the Nvidia control panel set to use the monitors built in scaling? Yeah it's set to use the built-in scaling. This doesn't happen in Vista SP2 however. Link to comment Share on other sites More sharing options...
NEVER85 Posted May 24, 2009 Author Share Posted May 24, 2009 Bumping this. It happens regardless of the driver, whether it's the latest nVidia driver, the older nVidia drivers, or the Microsoft driver, the resolution bug happens every time I turn my monitor on. It still goes from 1440x900 (native) to 1280x1024. Link to comment Share on other sites More sharing options...
Ghostdraconi Posted May 24, 2009 Share Posted May 24, 2009 Try looking at the monitor drivers, its a long shot but that might be the problem. Link to comment Share on other sites More sharing options...
Nadja Posted May 25, 2009 Share Posted May 25, 2009 happens to me very occasionally with an ATI 4850 - 9.4 and 9.5 Catalyst x64 drivers tested. for both 7100 x64 and 7127 x64 (on 2 separate hdd's) I thought it was one of my cables/connectors playing up because turning off the power to the monitor for a few seconds fixes it. Viewsonic 1920x1080 native and a 1360x768 native TV as a second monitor. very strange bug... Link to comment Share on other sites More sharing options...
NEVER85 Posted May 26, 2009 Author Share Posted May 26, 2009 I've tried again with build 7127. Unfortunately, the bug is still present. The only things I've noticed are when I'm in Appearance and Personalization > Display > Screen Resolution. When the monitor is on the correct resolution, the monitor is listed properly (FPD1975W) under Display. But when I turn the monitor off and on, and the resolution is messed up, it's listed as "Generic non-PnP monitor". If I have Device Manager open with the normal resolution, it says "Generic PnP monitor", but with the screwed up resolution, it says "Generic non-PnP monitor" as well. I don't know if this helps any but it's the only consistency I've noticed with this bug. I googled Generic non-PnP monitor but nothing helpful really came up. Link to comment Share on other sites More sharing options...
ozgeek Posted May 27, 2009 Share Posted May 27, 2009 Not a bug with Windows 7. Sounds like device driver failing. Find updated drivers from site or windows update? Tried another cable (might be unrelated but worth a try)? Or perhaps to do with your video card than the monitor (test by trying the monitor on another computer). Link to comment Share on other sites More sharing options...
Pikey Posted May 27, 2009 Share Posted May 27, 2009 Why not try the other port on the card? Link to comment Share on other sites More sharing options...
+KibosJ Subscriber² Posted May 27, 2009 Subscriber² Share Posted May 27, 2009 I haven't seen this issue and my monitor is constantly turned on and off, unplugged, plugged back in. I have nVIDIA drivers installed, doesn't happen with Microsoft Update drivers either. I'd suspect the card, like Pikey said, try the other port on the card. The monitor is detected as a 'device' in windows seven, dunno if it is the same in Vista. (When unplugged it plays the 'device unplugged' sound) Link to comment Share on other sites More sharing options...
NEVER85 Posted May 28, 2009 Author Share Posted May 28, 2009 I haven't seen this issue and my monitor is constantly turned on and off, unplugged, plugged back in. I have nVIDIA drivers installed, doesn't happen with Microsoft Update drivers either.I'd suspect the card, like Pikey said, try the other port on the card. The monitor is detected as a 'device' in windows seven, dunno if it is the same in Vista. (When unplugged it plays the 'device unplugged' sound) I tried the other port on the card, and it still did the same thing. I have no problems in Vista, so I'm still at a loss as to what the problem is in 7. I have onboard graphics that I don't use, I'll give that a try. Link to comment Share on other sites More sharing options...
Recommended Posts