Lord Ba'al Posted May 16, 2009 Share Posted May 16, 2009 Same procedure as every build :laugh: Here's the thread to report any bugs concerning Build 7127: - dead bugs which have been extreminated in 7127 - bugs which started in earlier builds and are still around - new bugs, not found in any previous builds 7127 x64 has just finished appearing on my HD and I've yet to install it, so I'll add any bugs I'll possibly find later on. Link to comment Share on other sites More sharing options...
08993 Posted May 16, 2009 Share Posted May 16, 2009 *jumps at the sound of a pin dropping* Not sound anything I'd consider a bug in 7127 yet! Link to comment Share on other sites More sharing options...
lee31 Posted May 16, 2009 Share Posted May 16, 2009 I kept on getting start up problems in the RC that I hadn't had in earlier builds where I get asked to either start up normally or use start up repair. That happened nearly everytime I first booted it up at the beginning of the day but thankfully so far that issue has gone in this build. Other than that I have no other issues so far. Link to comment Share on other sites More sharing options...
jjrambo Posted May 16, 2009 Share Posted May 16, 2009 7130 Escrow RTM? Link to comment Share on other sites More sharing options...
Kevin. Posted May 16, 2009 Share Posted May 16, 2009 7130 Escrow RTM? Nothing has been confirmed on which build is an RTM Escrow. Link to comment Share on other sites More sharing options...
Pharos Posted May 16, 2009 Share Posted May 16, 2009 1. Open Start Menu 2. Open "Getting Started", or type Getting Started if it's not in the list 3. Open "Choose when to be notified about changes to your computer" , or just click Change UAC settings via the Jump list - Watch how the icon opens in the superbar Is this a bug? :huh: Link to comment Share on other sites More sharing options...
codenamepenryn Posted May 16, 2009 Share Posted May 16, 2009 1. Open Start Menu2. Open "Getting Started", or type Getting Started if it's not in the list 3. Open "Choose when to be notified about changes to your computer" , or just click Change UAC settings via the Jump list - Watch how the icon opens in the superbar Is this a bug? :huh: yeah, i opens on the right, and moves to the left, while on other applications, it just opens. Link to comment Share on other sites More sharing options...
Satchmo Bevins Posted May 16, 2009 Share Posted May 16, 2009 The Action Center tray icon is turned off, and I see no way to turn it on. To see if there are issues you have to go to Control Panel -> Action Center Flight Simulator X now works as it should. No more erroneous messages about having the wrong DirectX version. WMP seems to be not forgetting the library now. But I think that was fixed in 7100. Installed the CCCP codec pack and that seems to work nicely for watching .mkv videos. There is still the Firefox-minimize -> Messenger-open bug. Overall, 7127 x64 is pretty snappy on an dual core with 2gb of memory. Link to comment Share on other sites More sharing options...
Denis W. Veteran Posted May 16, 2009 Veteran Share Posted May 16, 2009 1. Open Start Menu2. Open "Getting Started", or type Getting Started if it's not in the list 3. Open "Choose when to be notified about changes to your computer" , or just click Change UAC settings via the Jump list - Watch how the icon opens in the superbar Is this a bug? :huh: I suppose it spawns a process, which quickly executes UserAccountControlSettings.exe and closes itself. Link to comment Share on other sites More sharing options...
Pikey Posted May 16, 2009 Share Posted May 16, 2009 The Action Center tray icon is turned off, and I see no way to turn it on. To see if there are issues you have to go to Control Panel -> Action Center Shows up fine here .. takes a little while to appear though .. Link to comment Share on other sites More sharing options...
venejo Posted May 16, 2009 Share Posted May 16, 2009 It's own screesavers don't work on my system. Installed this morning using clean install. Link to comment Share on other sites More sharing options...
dcoaster Posted May 16, 2009 Share Posted May 16, 2009 This is the first build that does not recognize my sound card. Every other build from 6956 onward worked fine with my sound, but 7127 cannot find drivers. I've tried Creative's website, but no luck finding any drivers. (N) Link to comment Share on other sites More sharing options...
Satchmo Bevins Posted May 16, 2009 Share Posted May 16, 2009 Shows up fine here .. takes a little while to appear though .. If I go: right-click Taskbar->Properties->Notification Area->Customize->, there is no entry for Action Center. If I go to "Turn Systems Icons On or Off", the option of "on" or "off" for Action Center is grayed out and inaccessible. I'm still happy with this build. :yes: Link to comment Share on other sites More sharing options...
Lord Ba'al Posted May 17, 2009 Author Share Posted May 17, 2009 I suppose it spawns a process, which quickly executes UserAccountControlSettings.exe and closes itself. Yes, it was done that way to make it more secure. Link to comment Share on other sites More sharing options...
mikemc2k Posted May 17, 2009 Share Posted May 17, 2009 I have 7100 build and action center comes up fine??????? Link to comment Share on other sites More sharing options...
KyleGM Posted May 17, 2009 Share Posted May 17, 2009 1. Open Start Menu2. Open "Getting Started", or type Getting Started if it's not in the list 3. Open "Choose when to be notified about changes to your computer" , or just click Change UAC settings via the Jump list - Watch how the icon opens in the superbar Is this a bug? :huh: How do you notice little things like that :p I'm liking the lack of bugs being found though :D Link to comment Share on other sites More sharing options...
burnsflipper Posted May 17, 2009 Share Posted May 17, 2009 upgraded from 7100 so far runs great, the only thing, daemon tools lite stopped working, and the sptd driver wont install again, but virtual clonecd works great Link to comment Share on other sites More sharing options...
08993 Posted May 17, 2009 Share Posted May 17, 2009 upgraded from 7100 so far runs great, the only thing, daemon tools lite stopped working, and the sptd driver wont install again, but virtual clonecd works great Yeah that happened to me to, so I did a fresh install of 7127 and DT installed and works fine. Link to comment Share on other sites More sharing options...
freakyfriday Posted May 17, 2009 Share Posted May 17, 2009 i did a upgrade from 7100 and when it was checking the upgrade thing, it said to uninstall dt and then reinstall it after. works fine for me i'm on x64 Link to comment Share on other sites More sharing options...
gregrocker Posted May 17, 2009 Share Posted May 17, 2009 Question to you who have installed this build: Can you confirm that it activates with RC keys AND receives Windows updates as RC would? Uploader sez that there is no support for this build from MS but don't know whether that means anything different than RC. I have a stupid little annoying bug in 7100 (task bar too fat and won't resize) requiring reinstall and I want to use this build if it wil activate and update. Link to comment Share on other sites More sharing options...
lee31 Posted May 17, 2009 Share Posted May 17, 2009 Question to you who have installed this build: Can you confirm that it activates with RC keys AND receives Windows updates as RC would? Uploader sez that there is no support for this build from MS but don't know whether that means anything different than RC. I have a stupid little annoying bug in 7100 (task bar too fat and won't resize) requiring reinstall and I want to use this build if it wil activate and update. You can use the RC keys just fine however it's not an official release and like your uploader said there is no support for this build so you won't receive updates. Link to comment Share on other sites More sharing options...
terminx Posted May 17, 2009 Share Posted May 17, 2009 upgraded from 7100 so far runs great, the only thing, daemon tools lite stopped working, and the sptd driver wont install again, but virtual clonecd works great This happened to me, too. Was able to fix it by changing some registry key permissions. Link to comment Share on other sites More sharing options...
gregrocker Posted May 18, 2009 Share Posted May 18, 2009 You can use the RC keys just fine however it's not an official release and like your uploader said there is no support for this build so you won't receive updates. Deal killer for me since I want performance, driver and security updates. Is there anything I will miss by not keeping up with these higher builds, or are any substantial bug fixes or other stability improvements pushed through on WUpdate? Link to comment Share on other sites More sharing options...
08993 Posted May 18, 2009 Share Posted May 18, 2009 Deal killer for me since I want performance, driver and security updates. Is there anything I will miss by not keeping up with these higher builds, or are any substantial bug fixes or other stability improvements pushed through on WUpdate? Well TBH, if you use unofficial builds you are best keeping up with them. Having said that, if 7100 gets patched up to have the same fixes 7127 has I'll go back to 7100! 7127 has increased game compatability and WMP fixes, and as a gamer that puts it ahead of 7100 for me. Link to comment Share on other sites More sharing options...
ObiWanToby Posted May 18, 2009 Share Posted May 18, 2009 I'd still like to know if Punkbuster works. Game compatability is increased but will it break PB. PB seems to work with official builds, 7000 and 7100. Link to comment Share on other sites More sharing options...
Recommended Posts