Camaro owner records mechanics abusing car, scheming to get damages paid fo


Recommended Posts

When you own a sports car, you inevitably get a little paranoid about how it's treated when in the care of strangers. One South Carolina man was worried enough that when he took his 2010

Chevrolet Camaro SS in for service at a Chevy dealer, he hid a voice recorder in the car. He was right to be worried: The recorder caught mechanics doing burnouts and discussing how to make the owner pay for a ruined clutch the car didn't have before coming in. Now the Internet Justice League has taken the wheel.William Clark says he took his Camaro to Best Chevrolet-Kia in Easley, S.C. for a clunking noise in the car's six-speed manual transmission. After a previous visit to a different dealer, his Camaro had died shortly after Clark retrieved it; while he suspected the staff at that dealership of joyriding, he had no proof at the time.

This time, the voice recorder hidden in the door pocket catches employees doing several burnouts and hard launches in the Camaro; Smith later says the techs drove it harder in 20 minutes than he had in three years. Once back in the shop, the mechanics realize the Camaro's clutch has been fried, and come up with a plan to blame the damage on Smith, saying to "write it up as him buying a (expletive) clutch," while saying another part failed under warranty so that General Motors would pay for its replacement.

Smith says he's taken his evidence to the dealer and Chevrolet customer service; the dealer offered to reassess the damage or take the Camaro as a trade-in on another car, but refused Smith's demand to buy the car back. Smith says Chevrolet customer service washed it hands of the problem, saying it was an issue between him and the dealer. As of the last update, the car's smoked clutch remains untouched.

Unfortunately for Smith, there's few other steps he can take that don't end in court. Dealers are regulated by states; Clark can file a complaint with South Carolina officials, but even with an audio recording the assessment of damage isn't so clear-cut as if the mechanics had wrecked it on a test drive. Instead, other Camaro owners have taken up the cause, posting Smith's video to the dealership's Facebook page and otherwise making noise about the problem.

You can hear the entire exchange, including the profanity, here. A lawyer for Best Chevrolet, in a request to Yahoo Autos to take down this story, told us in an email that the audio was "misleadingly edited." Clark has said the dealership has threatened to sue him over the audio, but has also spoken with him about buying the Camaro back. The dealership may soon learn that in the Internet era, one burnt clutch can create quite the stink.

Absolutely shocking.

Really feel for the guy, he is stuck in a bad situation due to idiot "mechanics". He is now left with court cases, a broken car (he presumably cant/isnt driving) and probably he will also end up with the bill.

Instead of trying to catch them out with his voice recorder (which probably doesn't do much in the way of evidence), he should have listened to his gut and gone to another dealer.

(which probably doesn't do much in the way of evidence)

I thought the same thing. I'm not sure if secretly recording someone is admissible. Perhaps he hoped he could shame them into doing the right thing, but that doesn't seem to be the case.

I thought the same thing. I'm not sure if secretly recording someone is admissible. Perhaps he hoped he could shame them into doing the right thing, but that doesn't seem to be the case.

I think if they're inside your property you have the right to record whatever you like, though I'm not sure.

I work for a dealership and I can assure you that anytime a technician was caught abusing a customers car... they were typically fired on the spot. Some were allowed to stay, but then given poor paying work and forced out. It's one thing my company is very strict about.

As a former Camaro owner, I would be at the dealership every day until they bought the car from me for KBB value.

No excuse for this.

You woul dhave lost money since a burnt out clutch significantly lowers its value. Remember that a single scratch takes a car from very good to good.

I work for a dealership and I can assure you that anytime a technician was caught abusing a customers car... they were typically fired on the spot. Some were allowed to stay, but then given poor paying work and forced out. It's one thing my company is very strict about.

i once took my honda for a repair (fuel sensor was broken) in a dealership and when i was taking the car home i notice a noise in the engine; turns out someone left the old sensor in a space between the engine and the battery :o took the car back to the dealer and said to the guy in the reception "i think you guys forgot this".. :laugh:

The dealer manager talked to me, profusely apologizing for the situation and saying an internal investigation was going to initiated to know what happened; next time i went there (had to change the radio antenna) he told me the mechanic that left the old sensor there was fired, since that could had sparked an accident or engine damages and it was unacceptable.

this and many other stories that i have about mechanic fails are the reason i distrust that profession; very few mechanics i trust my car and, ultimately, the safety that car could give to me and my family.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Excuse me for having an opinion, fella'... (Why am I not surprised?...) Congrats on your very informative post however...
    • By the sounds of that wall of Fox News propaganda gibberish attacking the Democratic Party you've already had plenty of "juices" flowing this morning. You've ruined what could have been a productive comment thread.
    • (Topic to get the juices flowing this Sunday morning!...) Actually, the situation has almost nothing to do with "lack of skills", especially since assembly-line skills can be taught to anyone, including Americans, certainly. Rather, the inadequacy-to-impossibility of large-scale tech manufacturing in America today, and the reasons why America finds tech manufacturing completely onerous in the 21st century, has to do with politically driven laws amid a plethora of non-scientific, utterly politicized "science-fact" that is patently false, punitive business taxation at every turn, an array of judicial fines of unimaginable scope and complexity, and, last but not least, American unionization strictures that serve to actually slay job creation and hobble all such manufacturing endeavors in America before they can get off the ground. Globalism emerged, they tell us, as the needed answer to American hubris and an unholy American drive to excel. Unless one is buried under mounds of political propaganda, it's easy to see the absurdity of labeling the employees of SpaceX, for instance, as "unskilled labor"... Etc. ad infinitum. At one time in the recent past, American manufacturing prowess was the envy of the world in a wide variety of technical fields! The current federal and state government roadblocks against America becoming competitive globally in tech manufacturing are considerable, it's true, as anyone with a working brain knows. But remarkably, that is only half the story! The other half of the story is, of course, the corporations themselves... Chinese tech manufacturing is simply unassailable in terms of profits, because the Chinese government wants to see its tech manufacturing second-to-none globally so that no companies/nations can compete in terms of ROI, and China has completely succeeded in that goal. Let's tic-off a few things: *Chinese tariff policies are set according to what is considered best for Chinese business, Chinese employees, and the Chinese people. Huge difference with how things are done with tariffs in the US--as the US government (SCOTUS in this case, Congress in others) plainly feels that tariffs are "unfair" for the limited number of citizens who may pay them, whereas nothing is "unfair" when Congress considers the Personal Income Tax rates to be infinitely hike-able, along with infinitely enlarging annual budget deficits. *The Chinese government boldly subsidizes Chinese companies to artificially amplify their profits. *The Chinese government deliberately refuses to avidly demonize Chinese businesses and does not consider Chinese businesses "the enemy", so very unlike American (D)s these days. *Chinese labor laws and businesses are allowed to set their own labor policies according to what Chinese companies consider is best for companies and their employees... Simply put, American workers in tech manufacturing are not allowed to set their own labor policies! It is the height of hypocrisy for Americans to decry working conditions in China while simultaneously ensuring that American products are manufactured in China, not in the US, simply to maximize profits. There is nothing wrong with making a profit, of course, absolutely nothing. But there is plenty wrong with attempts to normalize hypocrisy of this kind! But rank hypocrisy and the (D) party in the US are longtime bedfellows... The current government in Washington is working overtime to see if it can toss out the horribly poor, failed economic policies of the past, while the (D)s still in Washington work very hard to bring back the stupidity whenever possible. With the right policies in place, America can be an infinitely competitive manufacturer.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      64
  • Tell a friend

    Love Neowin? Tell a friend!