Recommended Posts

How to install System restore on server 2003

This thread describes how to install system restore on server 2003. It is not a thread for talking about WHY you might want to do this, that belongs to another thread :)

Below i will show how to do this after server 2003 is installed. I haven't tried slipstreaming this, but i imagine it could be done easily. If there's enough interest i might show how to slipstream system restore into server 2003.

Before we begin, you'll need an XP CD. Doesn't matter if it's home or pro. It shouldn't matter if it has a service pack on it, since all the files will be the same source. In testing i used a slipstreamed cd that already had sp1 on it.

In XP, system restore is installed in syssetup.inf under the inf.always section. If you have XP installed, you can open up %windir%\inf\syssetup.inf and search for [infs.Always], you'll see the section xp looks at for installing system components. You'll notice it has sr.inf, this is the inf for system restore. For server 2003, if you look at syssetup.inf you won't find sr.inf. This doesn't mean system restore won't work in server 2003, it just means they didn't install it.

So first what we're going to need to do is right click on sr.inf and select 'install', to install it on server 2003. If you have xp installed on another computer/partition you can just right click on it. If you don't, then extract \i386\sr.in_ from the XP cd to your desktop, then right click on it and select 'install'. It'll prompt you were the files are, point it to the XP CD. Once done, it'll prompt to restart, say yes.

That was easy, the next part is the tricky part. After restarting you'll get an error saying the service couldn't start. Specifically the error is error 1068. I searched google and found this link - http://www.aerdyne.com/Kbase/article_000005.htm. The error basically means it cannot run under the service it's on. In system restore's case, it runs under the network service. I know this because in services.msc, for path to executable, it says this: C:\WINDOWS\system32\svchost.exe -k netsvcs. This got me thinking so i opened up sr.inf, and found this line:

[sRSvc_delreg]

HKLM,"Software\Microsoft\Windows NT\CurrentVersion\SvcHost","SRGroup"

I opened up regedit, and this registry key didn't exist. So it seems the sr.inf doesn't register system restore to run under the network services group. Using the above registry key as an example, i opened regedit and went to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost

On the right hand side i saw netsvcs. I double clicked on it, but saw SRService no where (SRService is the name for system restore). On a hunch, at the bottom i added SRService, rebooted, and this time got no error on startup. I opened up rstrui.exe, and system restore opened fine. I also had a System restore tab in system properties now too. I was able to make a restore point fine, then restore the computer to it without any problems. So in the above key, you want to double click on netsvcs, and at the bottom of the list, you want to type in SRService (probably case sensitive).

If you're not good with the registry you can save the following as a whatever.reg file and import it, but because it's binary i can't say if it'll work. I recommend manually adding SRService to the netsvcs key.

---copy below to whatever.reg then double click on it -----

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost]

"netsvcs"=hex(7):41,00,70,00,70,00,4d,00,67,00,6d,00,74,00,00,00,41,00,75,00,\

64,00,69,00,6f,00,53,00,72,00,76,00,00,00,42,00,72,00,6f,00,77,00,73,00,65,\

00,72,00,00,00,43,00,72,00,79,00,70,00,74,00,53,00,76,00,63,00,00,00,44,00,\

4d,00,53,00,65,00,72,00,76,00,65,00,72,00,00,00,45,00,76,00,65,00,6e,00,74,\

00,53,00,79,00,73,00,74,00,65,00,6d,00,00,00,48,00,69,00,64,00,53,00,65,00,\

72,00,76,00,00,00,49,00,61,00,73,00,00,00,49,00,70,00,72,00,69,00,70,00,00,\

00,49,00,72,00,6d,00,6f,00,6e,00,00,00,4c,00,61,00,6e,00,6d,00,61,00,6e,00,\

53,00,65,00,72,00,76,00,65,00,72,00,00,00,4c,00,61,00,6e,00,6d,00,61,00,6e,\

00,57,00,6f,00,72,00,6b,00,73,00,74,00,61,00,74,00,69,00,6f,00,6e,00,00,00,\

4d,00,65,00,73,00,73,00,65,00,6e,00,67,00,65,00,72,00,00,00,4e,00,65,00,74,\

00,6d,00,61,00,6e,00,00,00,4e,00,6c,00,61,00,00,00,4e,00,74,00,6d,00,73,00,\

73,00,76,00,63,00,00,00,4e,00,57,00,43,00,57,00,6f,00,72,00,6b,00,73,00,74,\

00,61,00,74,00,69,00,6f,00,6e,00,00,00,4e,00,77,00,73,00,61,00,70,00,61,00,\

67,00,65,00,6e,00,74,00,00,00,52,00,61,00,73,00,61,00,75,00,74,00,6f,00,00,\

00,52,00,61,00,73,00,6d,00,61,00,6e,00,00,00,52,00,65,00,6d,00,6f,00,74,00,\

65,00,61,00,63,00,63,00,65,00,73,00,73,00,00,00,53,00,61,00,63,00,73,00,76,\

00,72,00,00,00,53,00,63,00,68,00,65,00,64,00,75,00,6c,00,65,00,00,00,53,00,\

65,00,63,00,6c,00,6f,00,67,00,6f,00,6e,00,00,00,53,00,45,00,4e,00,53,00,00,\

00,53,00,68,00,61,00,72,00,65,00,64,00,61,00,63,00,63,00,65,00,73,00,73,00,\

00,00,54,00,68,00,65,00,6d,00,65,00,73,00,00,00,54,00,72,00,6b,00,57,00,6b,\

00,73,00,00,00,54,00,72,00,6b,00,53,00,76,00,72,00,00,00,57,00,33,00,32,00,\

54,00,69,00,6d,00,65,00,00,00,57,00,5a,00,43,00,53,00,56,00,43,00,00,00,57,\

00,6d,00,69,00,00,00,57,00,6d,00,64,00,6d,00,50,00,6d,00,53,00,70,00,00,00,\

77,00,69,00,6e,00,6d,00,67,00,6d,00,74,00,00,00,77,00,75,00,61,00,75,00,73,\

00,65,00,72,00,76,00,00,00,42,00,49,00,54,00,53,00,00,00,53,00,68,00,65,00,\

6c,00,6c,00,48,00,57,00,44,00,65,00,74,00,65,00,63,00,74,00,69,00,6f,00,6e,\

00,00,00,68,00,65,00,6c,00,70,00,73,00,76,00,63,00,00,00,75,00,70,00,6c,00,\

6f,00,61,00,64,00,6d,00,67,00,72,00,00,00,57,00,6d,00,64,00,6d,00,50,00,6d,\

00,53,00,4e,00,00,00,53,00,52,00,53,00,65,00,72,00,76,00,69,00,63,00,65,00,\

00,00,00,00

--- copy above --------------------------------------------------------

That's it! Remember to restart both times.

Enjoy,

-gosh

post-77-1057441727.jpg

post-77-1057441727.jpg

Ok i just did a bit of editing. You know the system restore icon, looks a bit naff dont it? Kinda looks like Microsoft didnt have time to finnish it.... anyway i personally think the icon from Windows Me looks a lot nicer (i requested this icon it in another thread but its ok i found it now).

Anyway i extracted the icon group from the file, then used resource hacker to integrate the new icons into the original file. I thought id share just incase you want to use it :) just pop it in the \system32\restore\ folder.

rstrui.2k3.zip

rstrui.2k3.zip

Ok i just did a bit of editing. You know the system restore icon, looks a bit naff dont it? Kinda looks like Microsoft didnt have time to finnish it.... anyway i personally think the icon from Windows Me looks a lot nicer (i requested this icon it in another thread but its ok i found it now).

Anyway i extracted the icon group from the file, and i thought id share just incase you want to use it :).

rstrui.2k3.zip

rstrui.2k3.zip

To slipstream you would just need to add the registry key for netsvcs then copy the files for system restore into the i386 folder.

For instance in the hivesft.inf for xp youll see this:

HKLM,"SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost",netsvcs,0x00010000,\

"6to4",\

"AppMgmt",\

"AudioSrv",\

"Browser",\

"CryptSvc",\

"DMServer",\

"DHCP",\

"ERSvc",\

"EventSystem",\

"HidServ",\

"Ias",\

"Iprip",\

"Irmon",\

"LanmanServer",\

"LanmanWorkstation",\

"Messenger", \

"Netman",\

"Nla",\

"Ntmssvc",\

"NWCWorkstation",\

"Nwsapagent",\

"Rasauto",\

"Rasman",\

"Remoteaccess",\

"Schedule",\

"Seclogon",\

"SENS",\

"Sharedaccess",\

"SRService",\

"Tapisrv",\

"TrkWks",\

"W32Time",\

"WZCSVC",\

"Wmi",\

"WmdmPmSp",\

"winmgmt"

In hivesft.inf for server 2003 youll see this:

HKLM,"SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost",netsvcs,0x00010000,\

"AppMgmt",\

"AudioSrv",\

"Browser",\

"CryptSvc",\

"DMServer",\

"EventSystem",\

"HidServ",\

"Ias",\

"Iprip",\

"Irmon",\

"LanmanServer",\

"LanmanWorkstation",\

"Messenger", \

"Netman",\

"Nla",\

"Ntmssvc",\

"NWCWorkstation",\

"Nwsapagent",\

"Rasauto",\

"Rasman",\

"Remoteaccess",\

"Sacsvr",\

"Schedule",\

"Seclogon",\

"SENS",\

"Sharedaccess",\

"TrkWks",\

"TrkSvr",\

"W32Time",\

"WZCSVC",\

"Wmi",\

"WmdmPmSp",\

"winmgmt"

So just edit the server 2003 hivesft.inf file, and add SRService in that list. Then copy the files listed in sr.inf to the 2003 i386 folder. Finally, find some way to run the install. One way you could do this is with an unattend file, and have it run this command:

rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 sr.inf

Just change the path to sr.inf. That's the basic idea! That should work but untested.

-gosh

Well not quite, someone has to still get the welcome screen back up and the little user photo in the start menu. Once we have that, we will all trully have something unique. ;) Even better still if someone could pool all the hacks here (at least this kind) on this forum into an installable .exe conversion pack.

Q

Syntax Error - Microsoft didn't put System Restore on a Server OS because if the end user were to use it ( e.g. due to installing a faulty program .... ), it would cause data replication on the system - which is not good for a server in a production enviroment ....

Radish.

How are we so sure, that doing this, will make System Restore Work as its indented too?

Does it actually create "System Volume Information" in which it really does save the restore points?

or is this just some registry hack to make the application appear to work.

i'm too busy now, but tomorrow i'm planning on doing all this and doing some tests with system restore. then i'll post the results. from just installing the inf file, the tab appears in system properties, and it puts an icon in the start menu, in accessories\system tools. it seems pretty real to me.

Even without system restore you have a system volume information folder. In my original post i put that i was able to make restore points, then restore my computer to that restore point. Your just mad because you said it was "impossible" to do this, and i did it in 5 mins ;p

-gosh

make a list of questions you want me to answer about it tomorrow, i'll try to answer as many of them as possible. dunno about that automatic restore points though, cause that's every 24 hours windows is running, and i'm not using that install of windows nearly as much as xp. :/

Ok, number 1 can you lay out your guide a little more clearly minus superflous points, just action/outcome action/outcome sort of thing. (eg. Go to this directory do this, go to that directory do that, all in list format). Not that I'm sying its hard to follow, just that it could use a little cleaning up. BTW is that reg key all we need? Or is anything else required? If that's so can you post it in .reg format (I know its easy to do with notepad and change the extension, but its nice to just collect all these keys - and as I said, hopefully some day someone will get round to making an installer that will reisntate all these keys and hacks).

Q

Edited by raid517

Gosh.

All i can say is great work, You have been able to do something that has not been able to be done and that has been known as 'impossible' from the likes of myself and others.

Great guide you made there also, nice and thorough and easy to understand.

I appreciate your time in creating that guide.

Thank you so much for this.

Cheers

:D

Sorry I didn't make myself very clear, I've modified my post a little.

Anyway, great work all in all. I don't understand why people are saying its a bad thing though. Data replication in a server may be bad (why though?) but if your using it as a work station, is it still a bad idea?

Q

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!