Recommended Posts

I made another thread a few weeks ago but I've finally gone ahead and ordered most of my build, I have a few doubts on the remaining components I was hoping you could help me sort out though.

I have already ordered the following:

My two main questions are which SSD to get with it and whether I should get a third party CPU cooler or just use the stock one. I do plan to overclock the CPU and the GPU (though nothing extreme).

I'm currently considering one of these two SSDs, is there anything else at around that price point (given the capacity) that I should be looking at instead?

As for the monitor, I'm currently targeting the DELL UltraSharp U2711 but I'm considering getting 3 x DELL UltraSharp U2312HM or U2412M instead. Not sure yet...

Also, if I have any glaring omission please do tell me.

Link to comment
https://www.neowin.net/forum/topic/1074647-final-details-on-build/
Share on other sites

I have decided to go for the HP ZR2740w 27" 2560x1440 monitor, thoughts?

A major decisive factor was this:

The easiest answer is for those who are gamers. The only 27? monitor with 2560x1440 resolution I can recommend is the HP ZR2740w. Every other 27" QHD monitor tested has had far worse lag, well more than a frame, and you just aren?t going to be happy with it.

Taken from the review of another 27" IPS 2560x1440 panel at Anandtech http://www.anandtech.com/show/5752/nec-pa271w-when-accuracy-and-consistancy-matter/7

If you are going to be doing any overclocking of Ivy Bridge you will want to get an aftermarket cooler. They tend to run a little warmer than Sandy Bridge when OC'd.

Up to 20C hotter then Sandy ain't really what I'd call "a little warmer".

So yeah better get an aftermarket cooler :)

I took a look at the motherboard, and I must admit I'm not too familiar with the Z77 coolers but just when you are going to buy an aftermarket cooler make sure its not a low one because the transistors seem awfully close to the socket, I might be wrong on this tho.

In my opinion it even might not be loud but the problem is when you try to overclock it might get real hot real fast and in the worst possible scenario you might need to buy a new CPU in a short while after that, the more heat the CPU gets the less lifetime it has.

Ofcourse the stock coolers aren't some piece of crap, they are decent but yeah it's said that Ivy runs kinda hot when clocked compared to Sandy.

I see, any recommendations for coolers that would work well?

As for the SSD, I'm now considering either the 240GB Corsair Force GT mentioned earlier or the 256GB Samsung 830 series. Any idea which one is better?

To be honest, I haven't seen many Z77 coolers around just yet, depends on how compatible they are with previous sockets, best bet would be either the Corsair Hydro series for closed-loop watercooling. (The H100 is around 100 eruos here, yes thats kinda of a big money for a cooler but atleast you'll be safe for a long time)

And on the SSD part also go with the Corsair one :)

Thanks, I have decided to buy the Samsung 830 SSD

My new build is complete and has been ordered:

Intel Core i5 3570K (Ivy Bridge) Quad Core Processor @ 3.4 GHz

MSI Z77A-G45 LGA1155 Motherboard

16GB (4 x 4GB) Patriot G2 PC3-12800 RAM

Sapphire Radeon HD 7850 2GB

256GB Samsung 830 series SSD

Sony 24x SATA DVD-RW

OCZ ModXStream Pro 600W Modular PSU

Cooler Master Silencio 550 Case

Logitech Wireless Wave MK550 Keyboard & Mouse

HP ZR2740w 27" 2560x1440 IPS LED Monitor

This topic is now closed to further replies.
  • Posts

    • Removed the blue and underline as you did not post a link. This would also  be considered spamming.
    • Why it's almost impossible to produce a smartphone in the United States by Hamid Ganji If you look at the back of some Apple products, you can see the famous phrase “Designed by Apple in California, Assembled in China.” This phrase appears on products from one of the largest smartphone brands in the United States. These products are designed in the U.S., but their manufacturing takes place in China, India, Vietnam, or even Brazil. But why can’t Apple, as one of the largest American tech companies, produce its iPhones on U.S. soil? The idea for this topic came to me after the Trump Foundation launched a smartphone called the T1 and claimed that it was designed and built with American values in mind. However, this claim did not last long, as it was revealed that Trump’s phone was actually a rebranded HTC U24 Pro, with only a gold case and minor internal component changes. You see? Even a phone that is supposed to represent American values is manufactured in China. With a gross domestic product (GDP) exceeding $32 trillion, the United States is currently the world’s largest economy, while China ranks second with around $20 trillion. On the other hand, the United States is by a wide margin the global leader in various technological fields, and American companies spend hundreds of billions of dollars annually on research and development. From Apple and Google to Microsoft, Lockheed Martin, Boeing, and others, American tech and industrial giants lead their foreign competitors in many sectors. The United States also has no shortage of smartphone brands. Apple, Google, and Motorola are among the major brands in the smartphone market, collectively holding a significant share. However, the vast majority of their products are manufactured outside the United States. So why is it that the world’s largest economy, home to the most advanced technology companies and industrial powers, cannot produce a smartphone on its own soil? Let’s explore this question together. Even threats to impose tariffs won’t work After Trump entered the White House as the 47th President of the United States, his administration adopted strict tariff policies. One of these policies was the imposition of a 25% tariff on smartphones manufactured outside the United States. Trump said he “had a little problem” with Apple CEO Tim Cook over producing smartphones outside the U.S. So he thought that threatening a 25% tax on imported phones might force Apple to bring manufacturing back to the United States. “I have long ago informed Tim Cook of Apple that I expect their iPhones that will be sold in the United States of America will be manufactured and built in the United States, not India, or anyplace else,” Trump wrote on Truth Social. Image via The White House Although Apple currently manufactures some of the iPhone’s chips in the United States with TSMC's help, it still shows no willingness to shift full iPhone production to the country. At the time, renowned Apple supply chain analyst Ming-Chi Kuo wrote on X, “In terms of profitability, it’s way better for Apple to take the hit of a 25% tariff on iPhones sold in the US market than to move iPhone assembly lines back to the US.” However, manufacturing a smartphone in the United States is not as easy as it might seem, and many technical and economic barriers are involved. The lack of necessary manufacturing hubs There is a clear reason why many companies prefer to manufacture their products in China. China has established itself as the main global manufacturing hub for international companies, and over the past few decades, large contract manufacturers have emerged there, allowing companies like Apple to outsource production. One such example is Foxconn, which also manufactures some Apple products in India. Building the infrastructure required to produce smartphones in the United States would require tens of billions of dollars in new investment. Factories would need to be built, essential manufacturing equipment would have to be installed, and, most importantly, a skilled workforce capable of operating these systems would need to be recruited and trained. The United States currently lacks the core infrastructure needed to manufacture smartphones, and for this reason, many companies prefer to outsource production to Chinese contractors rather than spend tens of billions of dollars to build that infrastructure, which is significantly more economically efficient. Additionally, building such infrastructure in the United States could take up to a decade, ultimately leading to a significant increase in the product's final price for consumers. Shortage of trained labor in the U.S. compared to China Decades of serving as a global manufacturing hub have allowed China to build a massive talent pool in the production sector that is almost unmatched worldwide. Today, if a company chooses to manufacture its products in China, it can be confident that the workers involved in production have years of experience in their respective roles and are capable of producing high-quality goods with minimal errors. Even if we assume that tens of billions of dollars were invested in building smartphone manufacturing infrastructure in the United States, finding skilled workers would remain highly challenging. Apple CEO Tim Cook visiting the iPhone 6 assembly line in China in 2014. Image: Tim Cook on X In a 2015 interview on CBS’s 60 Minutes, Tim Cook said the main reason Apple isn’t producing in the US is a lack of skills. "China put an enormous focus on manufacturing, in what you and I would call vocational kind of skills. The US over time began to stop having as many vocational kinds of skills. I mean you could take every tool and die maker in the United States and probably put them in the room that we're currently sitting in. In China you would have to have multiple football fields,” Cook said. Also, in 2017, at the Fortune Global Forum in Guangzhou, Cook once again emphasized the importance of highly skilled Chinese workers. “China has moved into very advanced manufacturing, so you find in China the intersection of craftsman kind of skill, and sophisticated robotics and the computer science world. That intersection, which is very rare to find anywhere, that kind of skill, is very important to our business because of the precision and quality level that we like. The thing that most people focus on if they’re a foreigner coming to China is the size of the market, and obviously, it’s the biggest market in the world in so many areas. But for us, the number one attraction is the quality of the people,” Apple CEO said. Higher labor costs in the United States Producing almost any product in the United States is more expensive than in many other countries, and one of the main reasons is the higher cost of labor in the U.S. According to the Bureau of Labor Statistics, median weekly earnings of full-time workers in the United States were $1,235 in the first quarter of 2026. Meanwhile, the average annual salary in China's private sector in 2025 was RMB 71,590 (US$9,961). In many parts of the world, the weekly wage of an American worker is equivalent to several months of income. Another important factor to consider is that in the United States, the workforce capable of working on a smartphone assembly line is highly specialized and therefore commands higher-than-average wages. According to an estimate by Bank of America, producing an iPhone in the U.S. is technically possible, but “iPhone cost can increase 25% purely on higher labor cost in the U.S.” However, this 25% increase applies only if final assembly is performed in the United States while components are still sourced from China or elsewhere. In this case, the price of a base iPhone would rise from $799 to around $1,000. But in another scenario, if Apple were to produce the required components for the iPhone within the United States, production costs could increase by more than 90%. Trump’s dream for a “Made in the USA” iPhone might never come true In a free-market capitalist economy, one of the primary responsibilities of any CEO is to maximize profit. Using Apple as an example, Tim Cook’s role is to maximize the company’s profits so that it can fund research and development for new products and invest in areas such as artificial intelligence, while also keeping shareholders satisfied. Therefore, it is entirely understandable that Apple would choose not to bring its manufacturing back to the United States and instead keep production in countries where labor is cheaper, and products can be manufactured at a lower cost, thereby maximizing its profit margins. What is your opinion about manufacturing smartphones in the United States? If you are an American citizen, would you be willing to pay hundreds of dollars more for a smartphone made domestically in the USA? Let us know in the comments.
    • Cheers everyone for the replies. It's been very useful. 👍
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      153
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!