Fan Speed not changing on load


Recommended Posts

Ok so I was having some framerate problems with some games couldent figure it out. seems to be better*

Other night I Decided to clean my computer out without the use of compressed air and cleaned everything with a paper towel and alot of Qtips (dry).

I unscrewed the the 2 fans my computer has and cleaned them pretty good and heatsinks all the ram and grafix card. I also Qtipped all connectors and all around the motherboard and capaciters. (stayed grounded to chassis during everything)

Why fan speed not Increase with load. Like backing up games on steam Was all power to backing up and now no change at all in fan speed or anything. Did I miss somthing when I was Doing this I know I got case fan backwards and flipped it back around and thats it.

Second random Question I have This computer was a store baught one from a few years back the manufacurers website says

Does that mean the limit of what the hardware will support or the OS it came with support originally had 32bit vista

Memory Support Four DDR2 800/667/533/400 MHz SDRAM slots

Support up to 4 GB system memory

Link to comment
https://www.neowin.net/forum/topic/1102965-fan-speed-not-changing-on-load/
Share on other sites

Depends really, doesnt vista only see 4gb under 32bit? Not sure on the hardware capabilities as you havent mentioned what computer you have etc.

Has the fan ever gone on full under load? If it hasnt there might be an option in the bios to set the limit of it, not sure though.

It has on plenty of occasions before I cleaned it out Mostly when backing up files on steam or

http://support.gateway.com/s/PC/R/1015322R/1015322Rnv.shtml is my computer as well just upgraded psu to a 410watt to support an upgraded grafix card of an nvidia 450gts

Using core temp to watch it and it hovers around 40C

Will post test with load tester

You honestly can't expect us to help you with what you have just posted, right? Please provide at least some sort of detail - for starters, your system specs.. Second, are the fans hooked up to the motherboard, or the power supply (PSU)? Also, do they support PWM?

If they're hooked up to the motherboard, and support PWM, try using a program like SpeedFan. If they're hooked up to the PSU, they'll run at 100%.

Ok I got it load tested cpu fan responded although temp got to 62C before I Stopped the test lots of stuttering as well

Case fan did not swapped it and it worked must have killed the Original one.

Speed fan didnt affect the speed of any fans in my computer unfortuantly

Excuse my ignorance I dont know some of the common sense things with computers but I try

specs

Operating System

MS Windows 7 Ultimate 64-bit SP1

CPU

AMD Phenom X4 9500

Agena 65nm Technology

RAM

3.00 GB Dual-Channel DDR2 @ 334MHz (5-5-5-15)

Motherboard

ECS MCP61PM-GM (Socket AM2 )

Graphics

Acer S201HL (1600x900@60Hz)

1023MB GeForce GTS 450 (EVGA)

Hard Drives

298GB Seagate ST3320620A ATA Device (PATA)

466GB Western Digital WDC WD50 00AAKS-22YGA SCSI Disk Device (ATA)

Optical Drives

No optical disk drives detected

Audio

Realtek High Definition Audio

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!