Opened up my PS3 and reapplied heatsink paste


Recommended Posts

Just a friendly topic to say I finally cracked open my PS3 Slim tonight, cleaned out the dust, and then put new paste on my heatsinks. I have to say the default application from Sony in the factory is weak - I redone mine with IC Diamond 7.

Seems to be running a little quieter, but that will probably be mostly to do with dust clean out.

Wasn't a hard job at all, simply a little time consuming to take it at a slow pace.

yeah it's really simple. how old is your slim? it takes a few years for that stuff to dry up.

About 2 years (maybe 2.5-3 years actually?). It wasn't half dried up, crumbling and looked like a pretty uneven application to start with.

edit: The PS3 Slim was bought about 2 months after the US launch, whenever that was - It's a US console imported to UK.

I've noticed recently my slim has started to make a slightly different noise from the fan, which I'm sure is dust build-up causing a slight imbalance. Been meaning to give at a clean, might crack it open this weekend. Any idea what size the fan is? I might consider replacing it entirely for a quieter PC fan if it's not too incompatible.

  • 2 weeks later...

Hmmm, after reading this thread, think I might just clean my PS3's just to clean them.

However the other part of me is thinking just leave well enough alone, as they both seem fine. I do also usually blow compressed air on them at least once a month, if not more frequently.

I've had my PS3 for a long time, 3 years perhaps, and there was very little dust in mine. It was a bit of fun to take it apart and have a look around inside, but it was entirely unnecessary for the amount of dust I removed. My fan also looked as if it was brand new. I must take better care of my electronics than I thought I did :laugh:

I have a near launch PS3 (roughly March '07) and the first time I had cleaned it out was maybe a year ago and it was surprisingly clean in there. There's a decent amount of spacing between the fins on the heatsink that it doesn't clog with dust really at all. If you used compressed air that will clean it out just fine, and going any further would likely not be worth the time/effort. I also keep my apartment a lot cleaner than most, if not everyone I know, so maybe that plays some sort of role as well.

I had taken mine apart because the fan was starting to ramp up quicker than it used to, so figured that I'd give it a good cleaning as it had been a while. Turns out it wasn't really dirty at all inside but the thermal paste was pretty dried up (and I ended up sanding down the heatsink further as it wasn't as flat as I would've liked, but that's me being a bit OCD). Definitely noticed a difference afterwards but I'm quite sure it's because of the better thermal contact with the CPU/GPU as the previous paste was kind of crappy.

  • 4 weeks later...

I've read there's no real point replacing the heatsink paste because the chips don't even touch the heat plate. Sure cleaning the dust out is fine but unless you pull the heat plate off the processor and GPU (which is really dangerous) there's no benefit to replacing the paste cause there is even more paste underneath the heat plate.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!