• 0

Error disabling Connection


Question

I would like to disable my eithernet network connection and I get a error saying error disabling connection - It is not possible to disable the connection at this time. This connection maybe using one or more protocols that do not support Plug and play, or it may have been initiated by another user or the system account., If any help it would be great.

Link to comment
https://www.neowin.net/forum/topic/348866-error-disabling-connection/
Share on other sites

16 answers to this question

Recommended Posts

  • 0
got the same problem any help?

586459729[/snapback]

my problem was because i installed xpize and netcfgx.dll got changed in such a way that it would no longer function. try replacing that file with a known-to-be good file using an app called replacer and see if that helps.

  • 0

THIS HELPED ME!!!!

PRB: Cannot Enable or Disable a Network Device from the Network Connections Folder

SYMPTOMS

If you have a network device driver with an unsigned co-installer and you use the Windows XP operating system, you cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

CAUSE

The Device Manager runs in the logged-on user context and is, therefore, allowed to disable or enable devices with unsigned co-installers. However, the request from the Network Connections folder to enable or disable devices is sent to a LocalSystem service, which is not allowed to enable or disable devices because an unsigned co-installer cannot be trusted to run in the logged-on user context.

STATUS

This behavior is by design.

  • 0

I have exactly this same problem,

This happened when I installed Autopatcher XP August 2006.

I get this very error of not being able to disable internet connection from connections menu. I have to do it everytime from the device manager.

So far I have tried replacing netcfgx.dll and it didn't work. And I have also tried the following method too..

corrupted crypo service database...

Click Start, click Run, type cmd in the Open box, and then OK.

At the command prompt, type the following commands, pressing ENTER after each line:

net stop cryptsvc

ren %systemroot%\System32\Catroot2 oldcatroot2

reboot the computer back to normal mode.

None of them worked for me. Please tell me what to do.

Regards,

Furqan

i've had lots of similar problems when i installed xpize :pinch: very poor software

What did you do remove them? Except for ofcourse a new install.

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

Thanks.. my problem solved using this method..

so is there anyhting else I need to take care of ?

  • 0

If you... cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

That helped me to remove an annoying "Bluetooth-Disconnected" icon from my [32-bit] systray. It was so easy, I'm sure to be the hero on someone else's computer, too. Thanks.

  • 0

New to this forum so Hello everyone. I would like to try the method that tripbert gave to fix the Error Disabling Connection message problem. Unfortunately unlike gr8leo87, I need a little more help. I know how to copy what tripbert posted that is in between Start and Stop, but I don't know how to paste it into a file. I certainly tried, and even renamed one, but I couldn't paste the info in to it and was even sure where the file should go if I could. If any of you could give me a step by step explanation on how to accomplish this I'd appreciate it. Like others here, although this problem isn't a big deal, it still bothers me. I'm not sure exactly when it began, but it worked fine up until an install of AVG Internet Security Suite about two weeks ago, (Uninstalling it didn't make a difference) and updated to the newest FireFox version and McAfee SiteAdvisor. Other than that I'm not sure what caused this Error, and that's what bothers me the most about it I think. LOL. I did uninstall and reinstall the Wireless Network Adapter, as I was also getting a message that it may not be installed correctly. whenever I tried to use the repair feature. Anyway thanks ahead of time, it will certainly be appreciated.

  • 0
Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

1 year later thank you so much for this trick my internet work fine now!

  • 0
1 year later thank you so much for this trick my internet work fine now!

I went into the device manager, right clicked my Ethernet connection and the drop-down menu gave the option to "enable" but "disable" was not present. It was already enabled from the Control Panel so I found this confusing. However, I enabled via the Device Manager, then disabled via the Control Panel, and it worked. I have no idea what all that scripting is or for, but there are some very interesting things that can be done w/ @echo off...

  • 0

hi ...........

wre 2 paste this one and how 2 proceed....

thank u

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Opinion. All you did was blame Democrats for everything. You offered nothing but a hit piece to support your pro Trump, anti union right wing ideology.
    • Excuse me for having an opinion, fella'... (Why am I not surprised?...) Congrats on your very informative post however...
    • By the sounds of that wall of Fox News propaganda gibberish attacking the Democratic Party you've already had plenty of "juices" flowing this morning. You've ruined what could have been a productive comment thread.
    • (Topic to get the juices flowing this Sunday morning!...) Actually, the situation has almost nothing to do with "lack of skills", especially since assembly-line skills can be taught to anyone, including Americans, certainly. Rather, the inadequacy-to-impossibility of large-scale tech manufacturing in America today, and the reasons why America finds tech manufacturing completely onerous in the 21st century, has to do with politically driven laws amid a plethora of non-scientific, utterly politicized "science-fact" that is patently false, punitive business taxation at every turn, an array of judicial fines of unimaginable scope and complexity, and, last but not least, American unionization strictures that serve to actually slay job creation and hobble all such manufacturing endeavors in America before they can get off the ground. Globalism emerged, they tell us, as the needed answer to American hubris and an unholy American drive to excel. Unless one is buried under mounds of political propaganda, it's easy to see the absurdity of labeling the employees of SpaceX, for instance, as "unskilled labor"... Etc. ad infinitum. At one time in the recent past, American manufacturing prowess was the envy of the world in a wide variety of technical fields! The current federal and state government roadblocks against America becoming competitive globally in tech manufacturing are considerable, it's true, as anyone with a working brain knows. But remarkably, that is only half the story! The other half of the story is, of course, the corporations themselves... Chinese tech manufacturing is simply unassailable in terms of profits, because the Chinese government wants to see its tech manufacturing second-to-none globally so that no companies/nations can compete in terms of ROI, and China has completely succeeded in that goal. Let's tic-off a few things: *Chinese tariff policies are set according to what is considered best for Chinese business, Chinese employees, and the Chinese people. Huge difference with how things are done with tariffs in the US--as the US government (SCOTUS in this case, Congress in others) plainly feels that tariffs are "unfair" for the limited number of citizens who may pay them, whereas nothing is "unfair" when Congress considers the Personal Income Tax rates to be infinitely hike-able, along with infinitely enlarging annual budget deficits. *The Chinese government boldly subsidizes Chinese companies to artificially amplify their profits. *The Chinese government deliberately refuses to avidly demonize Chinese businesses and does not consider Chinese businesses "the enemy", so very unlike American (D)s these days. *Chinese labor laws and businesses are allowed to set their own labor policies according to what Chinese companies consider is best for companies and their employees... Simply put, American workers in tech manufacturing are not allowed to set their own labor policies! * One additional problem corporations have that I also do not sympathize with is they don't want to pay to train their American employees. They could easily do so, but would rather not have to pay for it. I find that pathetic, actually. It is the height of hypocrisy for Americans to decry working conditions in China while simultaneously ensuring that American products are manufactured in China, not in the US, simply to maximize profits. There is nothing wrong with making a profit, of course, absolutely nothing. But there is plenty wrong with attempts to normalize hypocrisy of this kind! But rank hypocrisy and the (D) party in the US are longtime bedfellows... The current government in Washington is working overtime to see if it can toss out the horribly poor, failed economic policies of the past, while the (D)s still in Washington work very hard to bring back the stupidity whenever possible. With the right policies in place, America can be an infinitely competitive manufacturer.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      62
  • Tell a friend

    Love Neowin? Tell a friend!