Exchange and DDNS? Possible?


Recommended Posts

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org. mx0.example.com will then need to be a record itself. I guess you could also just have test.no-ip.org as your only MX record.

My first thought though would be to test the possibility of receiving and sending on port 25. I would have thought most domestic ISP's will block this communication.

SK[' timestamp=1343722926' post='595047579]

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org.

My first thought though would be to test the possibility of receiving on port 25 and sending. I would have thought most domestic ISP's will block this communication.

well i think there was also a way around this for using a ddns fqdn as a web server from your home rite? i imagine there is something also like this for stmp (port 25, like you comment)

Can't think of a way as every other SMTP server in the world will be expecting to speak to your server on port 25. If your ISP block it then your pretty much stuffed. DynDNS offer some sort of mail feature though.

As I said test the connectivity first before implementing a solution that won't work. I host my three sites on my home network with the same Dynamic IP being used as an alias. It works fine. I know though that port 25 is blocked outbound as there is no mail functionality working. Kinda annoying as I run forums. Still, they are dead ones these days and are only really used for reference.

SK[' timestamp=1343722926' post='595047579]

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org. mx0.example.com will then need to be a record itself. I guess you could also just have test.no-ip.org as your only MX record.

My first thought though would be to test the possibility of receiving and sending on port 25. I would have thought most domestic ISP's will block this communication.

Not all do. Time Warner for example leaves the port open but adds its residential IP blocks to one or more DNS Block lists, so that all mail that comes from them gets marked as spam by receivers who check against said lists.

I'd imagine using something like DDNS probably would cause a similar issue. Though idk.

If what you want to do is accept incoming mail, yeah not too many issues there - get a MX record pointed to where you want to accept mail. That is about it.

Where the problem comes in is sending, as mentioned already -- most of the major players will block you from sending them email from a dynamic IP. Even if not using a block list, do you have a valid PTR for this IP - not going to accept mail from you.

So if what you want to do is send mail to your friend billy on his HOME smtp server, then sure go for it. If what you want to do is send actual production email that your sure is going to get there. Not so much, not to any of the major player domains, or any companies doing any sort of decent filtering.

  • 5 months later...

I run my own exchange server. Receiving emails are OK but sending gives an error. Tested via Exchange Connectivity and its says that no PTR Record available for the IP. Any solution to this?

by the way, I use Zerigo as my Dynamic DNS.

receiving you will be fine, it is always the sending. Many isps have closed out bound port 25 traffic outside of their network when on their dynamic ip network. Many spam filters have excluded dynamic range from being able to get through. How do you get around the world denying you?

The option would be to send through a mail host, you can use your isp mail host, but they may have a sending limit.

receiving you will be fine, it is always the sending. Many isps have closed out bound port 25 traffic outside of their network when on their dynamic ip network. Many spam filters have excluded dynamic range from being able to get through. How do you get around the world denying you?

The option would be to send through a mail host, you can use your isp mail host, but they may have a sending limit.

Using my ISP Mail Host is a great idea. I don't mind if they have sending limit. Do I only require to get the SMTP for the ISP? or what else info is required?

yeah sure there are lots of people that provide FREE email servers for you to send your mail through :rolleyes:

If you want/need to send email - then you have to be ready to show your not some random box on the net sending spam. No business that needs to use email is going to be on a dynamic IP. Your also going to be able to setup a PTR because again your not a on dynamic IP and your ISP provides you the ability to change the name the IP resolves too. Only the owning ISP can do this, arin controls who where netblocks point for dns here in the US, other parts of the world would be other orgs, lacnic, ripe, apnic, afrinic

Shoot more and more companies are giving up on running their own mail and doing it in the cloud themselves - not even running their own email servers any more. Or contract out companies to be the front man to their exchange boxes - where this other network sends and recv the mail, and exchange gets mail from this company, and sends all email through them "smart host"

Here is the thing - running your own email server on a home connection for anything other than a hobby or for you to get mail from to some bs domain that gets a couple of mails a day and sends a few a day through your isp email server is nothing more than an exercise in futility.

More likely than not your prob just going to end up running a spam machine anyway ;)

edit: What version of exchange are you running? Look up how to setup smarthost. Keep in mind that many isp will not allow you to send mail from other than your email address, ie say account is [email protected] -- many will not allow you to send mail through their servers that say the email is from [email protected]

SMTP you will need as well as your account info to be able to authenticate and send mail through. You will need to send mail as this account though...the mail header needs to show this for your recipients to be able to receive mail. Unless they just do a ip check (which may be the case), but if they do any sort of resolve and the ip doesn't match the header host it won't make it through. There is a lot that goes on to verify authenticity of the sender in a spam filter.

edit: What version of exchange are you running? Look up how to setup smarthost. Keep in mind that many isp will not allow you to send mail from other than your email address, ie say account is [email protected] -- many will not allow you to send mail through their servers that say the email is from [email protected]

am using Exchange Server 2013 over Windows server 2008 R2 (which is a DC as well). My ISP is Saudi Net (worst ISP in the entire middle east with no support at all). Cant even request for PTR. Tried the SMTP for them but still not working, maybe am not configuring Exchange Server properly.

SMTP you will need as well as your account info to be able to authenticate and send mail through. You will need to send mail as this account though...the mail header needs to show this for your recipients to be able to receive mail. Unless they just do a ip check (which may be the case), but if they do any sort of resolve and the ip doesn't match the header host it won't make it through. There is a lot that goes on to verify authenticity of the sender in a spam filter.

I tried tons of ways but none work. Web Server was way easy configuring compared to exchange server :/

"Cant even request for PTR."

I don't know of any ISP that would setup PTR of a dynamic IP other than the generic ones you get.. For example

;; QUESTION SECTION:

;xx.xx.13.24.in-addr.arpa. IN PTR

;; ANSWER SECTION:

xx.xx.13.24.in-addr.arpa. 7200 IN PTR c-24-13-xx-xx.hsd1.il.comcast.net.

Now such a PTR might meet some filtering some domains do in the sense that it exists.. Others might reject it because its not a true reflection of the forward name.. So for example if your mail server IP is resolved via smtp.somedomain.tld, they might like the PTR of the IP that resolves to to reflect the same smtp.somedomain.tld

As I already mentioned, some ISPs won't allow their smtp servers to send mail for anything other than the account holder email address. So if your email address with your isp is [email protected] and your trying to send email from [email protected] - even if you auth with your specific account info, their server might tell you to get lost since the email address is not valid for that account.

Many ISPs don't even allow outbound on 25 from their dynamic client networks, nor allow their smtp server to send email for any other email address then what is listed on the specific account - this is to help reduce spam being sent from their network. If you have such restrictions then your only solution is to pay for a smarthost that allows you to send mail they forward on your behalf on a different port, etc. The dyndns company already mentioned provides such solutions. If you not willing to pay for such services - how are you affording exchange? ;)

If you not willing to pay for such services - how are you affording exchange? ;)

I can afford all the services, but I wanted to setup it for free at all. By the way, setting up all this was a part of my exercise. Wanted to learn about the Web hosting, Domain Controller, Email exchange. All was setup properly except this Exchange. I tried adding the PTR host in Zerigo (my Dynamic DNS service) it was done but my ISP really need to assign me a PTR record to my IP (which seems not possible for Dynamic IP Users). How about if I search for some free SmartHost providers before paying for something :rofl:

Edit: by the way, I get free license for Microsoft Products :D so trying all of them is not that bad :rolleyes:

Your not going to find a FREE smart host.. Not that I can think of - I don't even think google apps when it was free for your domains allowed that?

What would the smarthost get out of it? Other than prob blacklisted because you were using them to send spam ;)

You can study the setup of exchange without really having to send mail to all the major players.. Does your isp allow outbound of their network on 25? Simple enough to test, try connecting to a smtp server somewhere?

Cheap way you could do it is get yourself a VPS somewhere... I have a vps for $15 a year that would be more than capable of sending email for me, etc. And I can setup the PTR on the IP the host gave me. So it can be done for very cheap.

But again if all your doing is playing/learning does not matter if the major players will block you.. there are plenty of domains you can send to for testing that wont filter you.

So telnet to a smtp server on 25, can you connect - if so then your isp allows you to send outbound on 25 and could setup exchange to directly send.. Just some of the major players are not going to accept mail from you.

budman@ubuntu:~$ telnet mailin-01.mx.aol.com 25

Trying 205.188.159.42...

Connected to mailin-01.mx.aol.com.

Escape character is '^]'.

554- (RTR:DU) http://postmaster.info.aol.com/errors/554rtrdu.html

554 Connecting IP: 24.13.xx.xx

Connection closed by foreign host.

so you see my ISP allows me outbound on 25, but mail server for AOL told me to get lost ;) Because

54 RTR:DU[/url]

Cheap way you could do it is get yourself a VPS somewhere... I have a vps for $15 a year that would be more than capable of sending email for me, etc. And I can setup the PTR on the IP the host gave me. So it can be done for very cheap.

Where? can I get that too?

Will post the telnet results once I get the exact SMTP for the ISP :wacko:

smtp for the isp? Just do a dns look for any smtp server for any domain. Use aol for an example

As to a vps -- here are some listings of cheap ones

http://www.lowendbox.com/

http://lowendstock.com/

Mine is with http://buyvm.net/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂
    • "This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time" ... Lol.
    • This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time by Sayan Sen Recently we covered a really good deal on an AMD RX 9070 three-fan model that's available at slightly above its MSRP. If you are looking for a GPU for 1440p gaming that's around the performance of the Nvidia RTX 5070 you should most definitely check it out. Let's say that you are looking for a monitor to pair that up with too. The Samsung 49" G9 curved QD-OLED superultrawide is a good option that can provide an immersive experience. However despite being a very good deal currently (at $855), it may seem unaffordable to you, or you may simply not want to spend as much on a monitor. In that case Dell's S2725QS can be a very good option as it's on sale at the moment for its lowest price in over six months (purchase link under the specs table down below). The big highlight of the Dell S2725QS is its 27-inch IPS panel with a 3840 x 2160 (4K UHD) resolution, offering a high pixel density that can make text appear sharper while also providing plenty of screen space for productivity and media consumption. The display supports a refresh rate of up to 120Hz through both HDMI and DisplayPort, making it suitable not only for everyday desktop use but also for smoother gaming and scrolling. AMD FreeSync Premium support is included as well, helping reduce screen tearing during gaming sessions. The screen has fairly good brightness and color accuracy so you can use it for general work purpose, though photo/video editing is probably not going to be the best match for this. The technical specs of the Dell S2725QS are given in the table below: Specification Value Viewable Screen Size 27 in (68.58 cm) Screen Mode 4K UHD Maximum Resolution 3840 × 2160 Maximum Preset Resolution 3840 × 2160 @ 120 Hz Standard Refresh Rate 120 Hz Panel Technology In-plane Switching (IPS) Backlight Technology LED Edgelight System Pixel Density 163 PPI Response Time 8 ms GTG, 5 ms GTG, 4 ms GTG Horizontal Viewing Angle 178° Vertical Viewing Angle 178° Brightness 350 cd/m² (nits) Native Contrast Ratio 1500:1 Color Support 1.07 Billion Colors Color Gamut 99% sRGB (CIE 1931) Adaptive Sync AMD FreeSync Premium HDCP Support Yes Mount Type Panel Mount VESA Mount 100 × 100 mm Maximum Height Adjustment 13 cm Tilt -5° to 21° Swivel -30° to 30° Pivot ±90° Stand Adjustments Tilt, Swivel, Height, Pivot Glass Hardness 3H Horizontal Frequency 27–270 kHz (DisplayPort 1.4 / HDMI 2.1) Vertical Frequency 48–120 Hz (DisplayPort 1.4 / HDMI 2.1) Video Inputs 2 × HDMI 2.1 (HDCP 1.4 & 2.3), 1 × DisplayPort 1.4 (HDCP 1.4 & 2.3) Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C Operating Humidity 10%–80% (Non-condensing) Storage Humidity 5%–95% (Non-condensing) Get it at the link below: Dell S2725QS 27-inch 4K 120Hz IPS monitor: $218.49 (Sold and Shipped by Amazon US) (Was: $280) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      +Edouard
      243
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      84
    5. 5
      macoman
      64
  • Tell a friend

    Love Neowin? Tell a friend!