Which is your favourite motherboard of all time?


Recommended Posts

I'm feeling a bit nostalgic here. Recently my trusty old A8N-SLI Deluxe bit the dust. It was the first computer that I fully built by myself so I was sad to see it go.

In that time I had replaced the noisemaker fan on the chipset with a heatpipe from an A8N-SLI Premium, and learnt a lot about overclocking and hardware in general from this board.

In the end the thermal paste between the MOSFETs and the heatpipe didn't hold up after so many years of constant use.

I consider it a piece of history, as it was one of the first decent Socket 939 boards (and with SLI) bringing in the 64-bit era. I can't believe how much money I spent on a 6800GT which is worse than integrated graphics by todays standards. Within 6 months after that was released it was already obsolete and considered mid-range, and then low-range shortly after.

It was preceded by an ECS K7S5A, also legendary, which bit the dust a few years earlier after finally giving in to all the torture it was put through (Have of it's life without working USB Ports which short circuited, and used a PCI USB card instead). This one I did not fully build from scratch (only pulled it apart from someone else's build and fully rebuilt it again) so not as special.

edit: I just remembered (suppressed memory). Between the ECS and Asus, I also had a Gigabyte P4 board. It was so bad, I want to forget, I can't even recall the model number.

I don't know if I am so fond of it because it was my first build or because it was awesome.

What has been your favourite motherboard of all time?

Honestly, I've been pretty fortunate with every motherboard I've had. I believe all the ones I still have are still working. The worst I ever had was a Biostar that I ordered from Newegg. It went into my Q6600 build and right after install it failed me. Returned it for a Gigabyte and haven't looked back. I also had an MSI board that I think is still working to this day. As far as a specific favourite, I'd have to say either my ASRock I used for my old 939 or my Gigabyte UD3LR for my Q6600. The ASRock is still working and reliably so. While it's overclocking options were very basic, it was an innovative board based solely on the fact that they were selling adapters to allow your board to support the AM2 chips - It was a nice way to allow consumers a direct path to upgrading without having to replace their entire motherboard (and to keep the money with ASRock.) My UD3LR was my first "higher end" motherboard and one that had all the features I could want for overclocking. Set up was easy, the board has been reliable and it's sturdy as hell.

Yea I have never really had any problems with any of the motherboards I have had, of course I used to upgrade often.

The one I have now, which is on the way out is an EVGA 780i SLI, which has been good, but is dyeing slowly. It is though, over 6 years old I believe.

MSI KT4 Ultra, had an Athlon XP 1700+ and overclocked the arse off it with DDR400 RAM, had 6 ram slots, AGP x8, 6x PCI slots the first proper 'performance' board I bought. Was a cheap version of the nForce2 chipset that was really unstable. Was a nice upgrade from my Duron 700Mhz KT3 motherboard.

I would have picked another but I was too young to remember, it was an Intel chipset board with Intel Celeron 300A, bodged an Intel P3 heatsink to it and managed to get 300Mhz overclock out of it.

Damn those where the days.

ASUS BE6 with a Celeron oc to 450. It was pretty hot at the time. I also still have a DFI Lanparty 939 board with an Opteron.

Thats it!

ABIT BX6 board managed to get a cherry picked Celeron 300A to 600Mhz, I love it when PCs were niche and not every moron had one.

ASUS P4V800D-X, overall it's an astonishingly **** motherboard, and is full of such great bugs like turning it on with a PCI-Express graphics card and turning it off again will then cause each subsequent boot to just beep that no GPU was detected until you remove the GPU and plug it back in... (And yes, boot up will then go fine until power off whereby you will again have to repeat the cycle of removing the GPU and putting it back...)

What I love about it however is that it's the only socket 478 motherboard with a PCI-express slot on it! Shame ASUS didn't do it right at all though.

As far as a specific favourite, I'd have to say either my ASRock I used for my old 939 or my Gigabyte UD3LR for my Q6600. The ASRock is still working and reliably so. While it's overclocking options were very basic, it was an innovative board based solely on the fact that they were selling adapters to allow your board to support the AM2 chips - It was a nice way to allow consumers a direct path to upgrading without having to replace their entire motherboard.

I have built many computers, mainly for work. The only home PC i've built uses (yes, still uses) an ASRock 939 Dual Sata2. Still in use every day, never uprgraded to AM2 though. At the month end will be upgrading the PC to Windows 8 and hopefully add another gig of memory - running 1GB at the minute.

I have not had any problems with the motherboard even though at the time people online were commenting on it being a cheap brand.

MSI KT4 Ultra, had an Athlon XP 1700+ and overclocked the arse off it with DDR400 RAM, had 6 ram slots, AGP x8, 6x PCI slots the first proper 'performance' board I bought.

Yup, same here. Never had a problem with that board although I absolutely HATED VIA chipsets.

I like my current ASUS board but the audio just died out on me after 8 months. Not sure how I feel about that.

Wasn't the best ever made, but I'm biased to the one who helped me dive into the computer realm, DFI Lanparty Ultra D 939. Still using it right now to write this up. Its been my workhorse, unfortunately it seems its about to bite the dust. Will always be remembered...

  • Like 2

Hello,

Of all time? Probably the AMI Enterprise III Series 68 motherboard, for Intel 80486 (and Pentium OverDrive) CPUs. This was a server-grade motherboard that could take 256MB. Not a lot by today's standards, but when it came out, anything about 8MB was a lot of RAM.

Regards,

Aryeh Goretsky

I think mine was the Asus Rampage Formula which was running a Q6600. I oath, best board I have ever owned, and that sound card!!!! I miss that beast. I am also starting to like my current board, GA-Z77x-UD3H. Am having no issues with it. But Asus and the ROG, epic stuff. I need another one....

I loved my DFI NFII Ultra Infinity... It had character - you could stay up all night to find the perfect settings and stable clock rates and the final working settings would make no sense to you whatsoever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Zen Browser 1.21.4b by Razvan Serea Zen Browser is a privacy-focused, open-source web browser built on Mozilla Firefox, offering users a secure and customizable browsing experience. It emphasizes privacy by blocking trackers, ads, and ensuring your data isn't collected. With Zen Mods, users can enhance their browser experience with various customization options, including features like split views and vertical tabs. The browser is designed for efficiency, providing fast browsing speeds and a lightweight interface. Zen Browser prioritizes user control over the browsing experience, offering a minimal yet powerful alternative to traditional web browsers while keeping your online activity private. Zen Browser’s DRM limitation Zen Browser currently lacks support for DRM-protected content, meaning streaming services like Netflix and HBO Max are inaccessible. This is due to the absence of a Widevine license, which requires significant costs and is financially unfeasible for the developer. Additionally, applying for this license would require Zen to be part of a larger company, similar to Mozilla or Brave. Therefore, DRM-protected media won't be supported in Zen Browser for the foreseeable future. Zen Browser offers features that improve user experience, privacy, and customization: Privacy-Focused: Blocks trackers and minimizes data collection. Automatic Updates: Keeps the browser updated with security patches. Zen Mods: Customizable themes and layouts. Workspaces: Organize tabs into different workspaces. Compact Mode: Maximizes screen space by minimizing UI elements. Zen Glance: Quick website previews. Split Views: View multiple tabs in the same window. Sidebar: Access bookmarks and tools quickly. Vertical Tabs: Manage tabs vertically. Container Tabs: Separate browsing sessions. Fast Profile Switcher: Switch between profiles easily. Tab Folders: Organize tabs into folders. Customizable UI: Personalize browser interface. Security Features: Inherits Firefox’s robust security. Fast Performance: Lightweight and optimized for speed. Zen Mods Customization: Deep customization with mods. Quick Access: Easy access to favorite websites. Open Source: Built on Mozilla Firefox with community collaboration. Community-Driven: Active development and feedback from users. GitHub Repository: Contribute and review the source code. Zen Browser 1.21.4b changelog: New Features Updated to Firefox 152.0.2 and 152.0.3 Added 'Edit pinned tab' context menu item to manually set a pinned tab's URL Added 'Add Route for Domain' context menu item to quickly add a tab's domain to the Space Routing settings Fixes Prevent sidebar from flickering when moving a tab (#14131) Full-screening while on a glance tab will now expand the glance tab to a normal tab (#11766) Fixed space routing tabs opening in background when it should be in foreground (#14183) Other minor bug fixes and improvements. Download: Zen Browser | 90.2 MB (Open Source) Download: Zen Browser ARM64 | Other Operating Systems View: Zen Browser Home Page | Screenshots 1 | 2 | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I was using searxng for about a year , self hosted, but results were starting to timeout and eventually it became unusable so I switched to degoog. Much better for my needs, more polished and add-ons like maps and calculations etc
    • Fake Superman doing the Anti-Trump PR for us, good man !
    • Hello, I am not as familiar with AMD CPUs as I am with Intel's, but as I understand it, that's a mid-range CPU from about three years ago.  I would think it to be fine for everyday casual-type use.  A larger SSD might be better, but with storage prices these days that's a decision that has to be carefully thought about. Regards, Aryeh Goretsky  
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!