Fan Speed not changing on load


Recommended Posts

Ok so I was having some framerate problems with some games couldent figure it out. seems to be better*

Other night I Decided to clean my computer out without the use of compressed air and cleaned everything with a paper towel and alot of Qtips (dry).

I unscrewed the the 2 fans my computer has and cleaned them pretty good and heatsinks all the ram and grafix card. I also Qtipped all connectors and all around the motherboard and capaciters. (stayed grounded to chassis during everything)

Why fan speed not Increase with load. Like backing up games on steam Was all power to backing up and now no change at all in fan speed or anything. Did I miss somthing when I was Doing this I know I got case fan backwards and flipped it back around and thats it.

Second random Question I have This computer was a store baught one from a few years back the manufacurers website says

Does that mean the limit of what the hardware will support or the OS it came with support originally had 32bit vista

Memory Support Four DDR2 800/667/533/400 MHz SDRAM slots

Support up to 4 GB system memory

Link to comment
https://www.neowin.net/forum/topic/1102965-fan-speed-not-changing-on-load/
Share on other sites

Depends really, doesnt vista only see 4gb under 32bit? Not sure on the hardware capabilities as you havent mentioned what computer you have etc.

Has the fan ever gone on full under load? If it hasnt there might be an option in the bios to set the limit of it, not sure though.

It has on plenty of occasions before I cleaned it out Mostly when backing up files on steam or

http://support.gateway.com/s/PC/R/1015322R/1015322Rnv.shtml is my computer as well just upgraded psu to a 410watt to support an upgraded grafix card of an nvidia 450gts

Using core temp to watch it and it hovers around 40C

Will post test with load tester

You honestly can't expect us to help you with what you have just posted, right? Please provide at least some sort of detail - for starters, your system specs.. Second, are the fans hooked up to the motherboard, or the power supply (PSU)? Also, do they support PWM?

If they're hooked up to the motherboard, and support PWM, try using a program like SpeedFan. If they're hooked up to the PSU, they'll run at 100%.

Ok I got it load tested cpu fan responded although temp got to 62C before I Stopped the test lots of stuttering as well

Case fan did not swapped it and it worked must have killed the Original one.

Speed fan didnt affect the speed of any fans in my computer unfortuantly

Excuse my ignorance I dont know some of the common sense things with computers but I try

specs

Operating System

MS Windows 7 Ultimate 64-bit SP1

CPU

AMD Phenom X4 9500

Agena 65nm Technology

RAM

3.00 GB Dual-Channel DDR2 @ 334MHz (5-5-5-15)

Motherboard

ECS MCP61PM-GM (Socket AM2 )

Graphics

Acer S201HL (1600x900@60Hz)

1023MB GeForce GTS 450 (EVGA)

Hard Drives

298GB Seagate ST3320620A ATA Device (PATA)

466GB Western Digital WDC WD50 00AAKS-22YGA SCSI Disk Device (ATA)

Optical Drives

No optical disk drives detected

Audio

Realtek High Definition Audio

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!