Orbis (PS4) devkit docs leak; 8GBRAM, 2.2GBVRAM, new Controller


Recommended Posts

"British site CVG speculated last week that, because they'd heard the PS4's controller was "trying to emulate the same user interface philosophies as the PS Vita", that meant it would feature a touch screen. Instead, the Orbis' controller features a capacitive touch pad, like you find on the back of a Vita (presumably it's also on the back of the PS4's controller), that can recognise two-point multi-touch. The entire pad can also be "clicked" for an additional input button."

The PS4's controller will again be capable of motion-sensing, like its PS3 predecessors, only now with improved technology like tilt correction. It will also feature vibration, which Sony has thankfully learned is a next-gen feature you need to launch with. It'll also have an RGB LED light in it.While there have been reports of the PS4 controller featuring "biometric" technology, there was no mention of it in the information we were provided.

There's one other addition to the PS4's pad you won't find on a DualShock 3: a "Share" button. We're not exactly sure what it does. The most likely use would be to allow users to share some aspect of their gaming experience to Twitter or Facebook. Maybe a screenshot? We have no idea. But that Share button might have something to do with...

We'll begin with the specs. And before we go any further, know that these are current specs for a PS4 development kit, not the final retail console itself. So while the general gist of the things you see here may be similar to what makes it into the actual commercial hardware, there's every chance some?if not all of it?changes, if only slightly.

That being the case, here's what we know is inside PS4 development kits?model # DVKT-KS000K?as of January 2013. As you'll see, some things have changed since earlier kits became available in March 2012.

System Memory: 8GB

Video Memory: 2.2 GB

CPU: 4x Dual-Core AMD64 "Bulldozer" (so, 8x cores)

GPU: AMD R10xx

Ports: 4x USB 3.0, 2x Ethernet

Drive: Blu-Ray

HDD: 160GB

Audio Output: HDMI & Optical, 2.0, 5.1 & 7.1 channels

A lot more info here (including new user accounts): http://kotaku.com/59...ve-specs-so-far

edit: VGleaks who put out the next Xbox specs had this to say...

VG Leaks teasing us

http://www.vgleaks.com/what-do-you-e...e-poll-inside/

Comments section:

Anonymous 23 January, 2013 at 22:48 Reply

What are your thoughts on the Kotaku ?leak?/clickbait?

And the answer:

Mr.X 24 January, 2013 at 0:23 Reply

Hi!

I think it?s better to wait until tomorrow to answer your question. Please, we will publish a new Orbis article soon, a different one?

Thanks for your enquiry.

im not so sure how the rear touch screen would work - but then again im still thinking of the dualshock controller style. perhaps it'll simply be shaped more like the Vita. still, the back touch is difficult to use on the vita, so...

Dev kits have x2 the RAM of the actual console right?

I wouldn't say all dev kits have twice the RAM but as a rule of thumb yeah.

im not so sure how the rear touch screen would work - but then again im still thinking of the dualshock controller style. perhaps it'll simply be shaped more like the Vita. still, the back touch is difficult to use on the vita, so...

They said they are redesigning the PS4 pad so I doubt it will be the same as Dual Shock 3.

Does anyone know if the "Bulldozer" is a laptop/mobile CPU or is it similar to a desktop CPU? (or something else) Although the EuroGamer leak says "Jaguar". Keeping in mind this is apparently devkits.

Hopefully VGleaks keeps to their word and releases their leak today.

Does anyone know if the "Bulldozer" is a laptop/mobile CPU or is it similar to a desktop CPU? (or something else)

It's a desktop class cpu not mobile.

Does anyone know if the "Bulldozer" is a laptop/mobile CPU or is it similar to a desktop CPU? (or something else) Although the EuroGamer leak says "Jaguar". Keeping in mind this is apparently devkits.

Hopefully VGleaks keeps to their word and releases their leak today.

Jaguar is the current rumoured CPU for both consoles, 2nd generation Bobcat processor aimed at low power mobile/tablet devices.

The devkit Kotaku posted is apparently an older one:

Currently, there are 3 types of devkits:

1) R10 boards with special BIOS, running in generic PC?s

2) ?Initial 1? ? Early devkit

model number: DVKT-KS000K

SCE-provided PC equipped with R10XX board

Runs Orbis OS

Available July 2012

3) SoC Based Devkit: early version of the ORBIS hardware

Available January 2013

R10 Board (with special BIOS) assemble in a Generic PC

Requires Windows 7 64 bit edition

Recommend

Sandy Bridge (Intel) or Bulldozer (AMD)

Minimum 8 GB RAM (system memory)

650 Watt PSU

VS2010 SP1

DWM (Desktop Windows Manager) must be turned off

Application will use Windows services for everything except GPU interface

SCE will provide ?Gnm?, a custom GPU interface

Do you remember the first Durango?s pictures? This is a very early devkit based on Windows.

DVKT-KS000K (?Initial 1?)

Runs Orbis OS

CPU: Bulldozer 8-core, 1.6 Ghz

Graphics Card: R10 with special BIOS

RAM: 8 GB (system memory)

BD Drive

HDD: 2.5 ? 160 GB

Network Controller

Custom South Bridge allows access to controller prototypes

dvkt-600x374.jpg

SoC Based Devkit

Available January 2013

CPU: 8-core Jaguar

GPU: Liverpool GPU

RAM: unified 8 GB for devkit (4 GB for the retail console)

Subsystem: HDD, Network Controller, BD Drive, Bluetooth Controller, WLAN and HDMI (up to 1980?1080@3D)

Analog Outputs: Audio, Composite Video

Connection to Host: USB 3.0 (targeting over 200 MB/s),

ORBIS Dualshock

Dual Camera

The last devkit is the closer one to the retail console. Expect a machine with these specs or similar to these ones. Obviously, Sony could introduce changes in this features, but don?t expect deep mods.

Source: http://www.vgleaks.c...s-roadmaptypes/

Last one is the one we're interested in. Orbis Dualshock mentioned as well.

Interesting article from Timothy Lottes (creater of FXAA)

Working assuming the Eurogamer Article is mostly correct with the exception of maybe exact clocks, amount of memory, and number of enabled cores (all of which could easily change to adapt to yields).

While the last console generation is around 16x behind in performance from the current high-end single chip GPUs, this was a result of much easier process scaling and this was before reaching the power wall. Things might be much different this round, a fast console might be able to keep up much longer as scaling slows down. If Sony decided to bump up the PS4 GPU, that was a great move, and will help the platform live for a long time. If PS4 is around 2 Tflop/s, this is roughly half what a single GPU high-end PC has right now, which is probably a lot better than what most PC users have. If desktop goes to 4K displays this requires 4x the perf over 1080p, so if console maintains a 1080p target, perf/pixel might still remain good for consoles even as PC continues to scale.

The real reason to get excited about a PS4 is what Sony as a company does with the OS and system libraries as a platform, and what this enables 1st party studios to do, when they make PS4-only games. If PS4 has a real-time OS, with a libGCM style low level access to the GPU, then the PS4 1st party games will be years ahead of the PC simply because it opens up what is possible on the GPU. Note this won't happen right away on launch, but once developers tool up for the platform, this will be the case. As a PC guy who knows hardware to the metal, I spend most of my days in frustration knowing damn well what I could do with the hardware, but what I cannot do because Microsoft and IHVs wont provide low-level GPU access in PC APIs. One simple example, drawcalls on PC have easily 10x to 100x the overhead of a console with a libGCM style API.

Assuming a 7970M in the PS4, AMD has already released the hardware ISA docs to the public, so it is relatively easy to know what developers might have access to do on a PS4. Lets start with the basics known from PC. AMD's existing profiling tools support true async timer queries (where the timer results are written to a buffer on the GPU, then async read on the CPU). This enables the consistent profiling game developers require when optimizing code. AMD also provides tools for developers to view the output GPU assembly for compiled shaders, another must for console development. Now lets dive into what isn't provided on PC but what can be found in AMD's GCN ISA docs,

Dual Asynchronous Compute Engines (ACE) :: Specifically "parallel operation with graphics and fast switching between task submissions" and "support of OCL 1.2 device partitioning". Sounds like at a minimum a developer can statically partition the device such that graphics can compute can run in parallel. For a PC, static partition would be horrible because of the different GPU configurations to support, but for a dedicated console, this is all you need. This opens up a much easier way to hide small compute jobs in a sea of GPU filling graphics work like post processing or shading. The way I do this on PC now is to abuse vertex shaders for full screen passes (the first triangle is full screen, and the rest are degenerates, use an uber-shader for the vertex shading looking at gl_VertexID and branching into "compute" work, being careful to space out the jobs by the SIMD width to avoid stalling the first triangle, or loading up one SIMD unit on the machine, ... like I said, complicated). In any case, this Dual ACE system likely makes it practical to port over a large amount of the Killzone SPU jobs to the GPU even if they don't completely fill the GPU (which would be a problem without complex uber-kernels on something like CUDA on the PC).

Dual High Performance DMA Engines :: Developers would get access to do async CPU->GPU or GPU->CPU memory transfers without stalling the graphics pipeline, and specifically ability to control semaphores in the push buffer(s) to insure no stalls and low latency scheduling. This is something the PC APIs get horribly wrong, as all memory copies are implicit without really giving control to the developer. This translates to much better resource streaming on a console.

Support for upto 6 Audio Streams :: HDMI supports audio, so the GPU actually outputs audio, but no PC driver gives you access. The GPU shader is in fact the ideal tool for audio processing, but on the PC you need to deal with the GPU->CPU latency wall (which can be worked around with pinned memory), but to add insult to injury the PC driver simply just copies that data back to the GPU for output adding more latency. In theory on something like a PS4 one could just mix audio on the GPU directly into the buffer being sent out on HDMI.

Global Data Store :: AMD has no way of exposing this in DX, and in OpenGL they only expose this in the ultra-limited form of counters which can only increment or decrement by one. The chip has 64KB of this memory, effectively with the same access as shared memory (atomics and everything) and lower latency than global atomics. This GDS unit can be used for all sorts of things, like workgroup to workgroup communication, global locks, or like doing an append or consume to an array of arrays where each thread can choose a different array, etc. To the metal access to GDS removes the overhead associated with managing huge data sets on the GPU. It is much easier to build GPU based hierarchical occlusion culling and scene management with access to these kind of low level features.

Re-used GPU State :: On a console with low level hardware access (like the PS3) one can pre-build and re-use command buffer chunks. On a modern GPU, one could even write or modify pre-built command buffer chunks from a shader. This removes the cost associated with drawing, pushing up the number of unique objects which can be drawn with different materials.

FP_DENORM Control Bit :: On the console one can turn off both DX's and GL's forced flush-to-denorm mode for 32-bit floating point in graphics. This enables easier ways to optimize shaders because integer limited shaders can use floating point pipes using denormals.

128-bit to 256-bit Resource Descriptors :: With GCN all that is needed to define a buffer's GPU state is to set 4 scalar registers to a resource descriptor, similar with texture (up to 8 scalar registers, plus another 4 for sampler). The scalar ALU on GCN supports block fetch of up to 16 scalars with a single instruction from either memory or from a buffer. It looks to be trivially easy on GCN to do bind-less buffers or textures for shader load/stores. Note this scalar unit has it's own data cache also. Changing textures or surfaces from inside the pixel shader looks to be easily possible. Note shaders still index resources using an instruction immediate, but the descriptor referenced by this immediate can be changed. This could help remove the traditional draw call based material limit.

S_SLEEP, S_SETPRIO, and GDS :: These provide all the tools necessary to do lock and lock-free retry loops on the GPU efficiently. DX11 specifically does not allow locks due to fear that some developer might TDR the system. With low level access, the S_SLEEP enables placing wavefront to sleep without busy spinning on the ALUs, and the S_SETPRIO enables reducing priority when checking for unlock between S_SLEEPs.

S_SENDMSG :: This enables a shader to force a CPU interrupt. In theory this can be used to signal to a real-time OS completion of some GPU operation to start up some CPU based tasks without needed the CPU to poll for completion. The other option would be maybe a interrupt signaled from a push buffer, but this wouldn't be able to signal from some intermediate point during a shader's execution. This on PS4 might enable tighter GPU and CPU task dependencies in a frame (or maybe even in a shader), compared to the latency wall which exists on non-real-time OS like Windows which usually forces CPU and GPU task dependencies to be a few frames apart.

Full Cache Flush Control :: DX has only implicit driver controlled cache flushes, it needs to be conservative, track all dependencies (high overhead), then assume conflict and always flush caches. On a console, the developer can easily skip cache flushes when they are not needed, leading to more parallel jobs and higher performance (overlap execution of things which on DX would be separated by a wait for machine to go idle).

GPU Assembly :: Maybe? I don't know if GCN has some hidden very complex rules for code generation and compiler scheduling. The ISA docs seem trivial to manage (manual insertion of barriers for texture fetch, etc). If Sony opens up GPU assembly, unlike the PS3, developers might easily crank out 30% extra from hand tuning shaders. The alternative is iterating on Cg, which is possible with real-time profiling tools. My experience on PC is micro-optimization of shaders yields some massive wins. For those like myself who love assembly of any arch, a fixed hardware spec is a dream.

...

I could continue here, but I'm not, by now you get the picture, launch titles will likely be DX11 ports, so perhaps not much better than what could be done on PC. However if Sony provides the real-time OS with libGCM v2 for GCN, one or two years out, 1st party devs and Sony's internal teams like the ICE team, will have had long enough to build up tech to really leverage the platform.

I'm excited for what this platform will provide for PS4-only 1st party titles and developers who still have the balls to do a non-portable game this next round.

Source: http://timothylottes.blogspot.fr/2013/01/orbis-and-durango.html

I hope they bump it up to 6 GB for the retail console.

Interesting article indeed, Audioboxer. Going by the PS3, it's logical for the PS4 to use LibGCM. I wonder if it'll also use PSGL. I think the next-gen Xbox will have an early advantage because of D3D11.1. A lot of developers are used to D3D and if history repeats itself, the good titles (with Uncharted or Killzone visuals) will come out later on the PS4.

I hope they bump it up to 6 GB for the retail console.

Why? Just to match what the recent reports say about the xbox 3 having more ram? There's no reason to do that if those same reports are true and the xbox 3's gpu is as far behind in raw horsepower as they claim.

They won't. GDDR5 is very expensive. 4Gb is plenty.

That's most likely true but there's always hope. The more RAM, the better.

Why? Just to match what the recent reports say about the xbox 3 having more ram? There's no reason to do that if those same reports are true and the xbox 3's gpu is as far behind in raw horsepower as they claim.

Developers want more RAM, regardless of the speed. Microsoft doubled the amount of RAM in the Xbox 360 prior to its release after Epic Games showed them what Gears of War looked like (with more memory). It cost a lot of money but they did it. Can you imagine how what the Xbox 360 would be like if it had 256 MB of RAM instead of 512 MB?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I notice how you dodged the questions I had about the racism shown by ignorant, gullible, cowardly people when the Poles, like your partner, were the immigrants. Ahem. I wonder how you'd feel if native born Brits suddenly treated you as "dirty crooked immigrant" for being half Trump-American? If they ordered you to leave and "go back to your corrupt country" (on the other side of the Atlantic), would you go? The truth is based on facts as supported by evidence. As requested in your previous posts, I have used the facts in your own post to show everyone the truth.
    • US citizens are paying to their government, who could use that to fund healthcare and tuition and relieve the costs of these for citizens instead of making tax breaks that overwhelmingly favor the rich. I'm not saying that tariffs are the correct solution, but what else would they be used for? What else could Trump have in mind for wanting them, if he hasn't figured out that labor costs are higher in the US?
    • I’m in need of a new chair and it sounds like the backrest cannot be locked? I also sat on a Herman miller and was devastated that it couldn’t be locked also, what is going on with chairs. I want to be able to lock the backrest into any position but not even the Herman’s do that
    • Sihoo Doro C300 Pro V2 Ergonomic Office Chair review: The Ikea of chairs by Steven Parker I've reviewed a few gaming chairs over the past three years or so and generally found them to score well in our reviews. SIHOO reached out asking if I was interested in taking a look at their flagship chair, the Doro C300 Pro V2. I never got the chance to check out its predecessor, but the V2 is described as an "Adaptive Ergonomic Chair." It became available to buy in April of this year. Let's get things rolling with a closer look at the specifications and features. Specifications Doro C300 Pro V2 Model Ergonomic Materials Mesh Back and Seat; Soft PU Coated Armrests Height adjustability 45.5 - 53 cm / 17.5" - 20.9" Seat (w+d) 52 x 43 - 47 cm / 20.5" x 16.9" - 18.5" (adjustable) Backrest 52 – 60 cm / 20.5" - 23.6" (adjustable) Lumbar support Mesh built-in (adjustable) Armrest adjustability 8D Bionic Armrests Rocking angle 105°, 120°, 135° (fixed) Neck support Mesh built-in (adjustable) Net weight 27.3 kg / 59.64 lbs Weight support 150 kg / 330 lbs Colors Black, White Warranty 5 years (upon registering) Price $499.99, $539.99 Introduction At first glance, it looks like a chair that in another life wants to be a Herman Miller; It certainly looks like my Aeron Remastered, but the Doro C300 Pro V2 has quite a few more features and costs quite a bit less. SIHOO says that it is made up of a "DynaCore" system that tracks your movement and synchronizes the headrest, backrest, lumbar support, and armrests as you shift, twist, or recline. They also say that the "SyncroFlex Backrest" molds to your spine, which kind of describes how the mesh fabric works in most ergonomic chairs, but anyway. Below are the meat and potatoes measurements for the chair. Here is the same tech sheet, but in inches. Durability I would be remiss to not talk about the various durability testing this chair underwent before coming to market, as this is claimed on the product page. First of all, the chair is BIFMA-, SGS-, and TÜV-certified. As for durability, the tests undergone were: 100,000 Castor cycles tested 120,000 Armrest cycles tested 120,000 Recline cycles tested 120,000 Gas lift cycles tested 60,000 Armrest durability cycles tested 120,000 Rotation cycles tested Nothing about weights testing, though. Now that's all disclosed, now onto my own personal findings. Assembly The Doro C300 Pro V2 came in two large boxes (1) (2), and everything was packed very well, protecting the different parts of the chair. In the box, there is a folded sheet that explains the 12 steps to assemble it; they are: Remove the bottom cover on the aluminum base; Insert the five legs into the aluminum base and use ten screws to fasten them; Insert the castors into the legs; Replace the bottom cover on the bottom of the aluminum base; Place the Class 4 Hydraulics gas cylinder into the aluminum base; Screw the bottom part of the arm rests, taking care of the orientation using two screws on each side; Use three torx screws to fasten the footrest to the bottom of the seat; Fasten the backrest to the seat using four torx bolts; Fasten the armrests to the backrest using four Torx bolts (two on each side), taking care to note the orientation; Place the chair onto the Class 4 Hydraulics gas cylinder; Insert the headrest into the top of the backrest; Use two torx screws to fasten the headrest to the backrest. There's also an online guide you can refer to. Carefully unpacking the two boxes took around 15 minutes because almost everything is wrapped in plastic and protective foam; the chair assembly itself took around an hour. I say in the above assembly steps to take note of the orientation, because it's not obvious which way around the bottom portion of the armrests go, and although there is an L and R on the bottom of the armrests, it also wasn't clear from the instructions which was actually left or right, facing the chair, or in the seated down orientation? Anyway, I ended up putting the bottom portions on the wrong sides, and after securing one of the armrests, I discovered that although it was on the correct side, the armrest base could rotate a full 360°, but not when bolted to the chair, so I had to remove it, rotate it, and then bolt it back on. Truly an Ikea experience! Also, to complicate things further, although all the parts are labeled from A to X (yes, that's 24 parts) unhelpfully, these letters do not appear on the parts themselves or the package with the bolts, screws, and washers. There's also a pair of protective gloves in the box, but I think they were made for much smaller hands than I have. Even my friend, who is 5.1, had difficulty putting them on. Once assembled, I needed to sit down. Anyway, as I said, it looks quite similar to my Herman Miller. And here is the back of it. If you look at the product page and on Amazon, it seems like a lot of thought has gone into the chair itself and what it's capable of, but there is no mention at all about the castors, and this is an area where I think the chair trips up quite quickly. I found it difficult to move the chair in any direction. I asked a friend who came to visit me earlier this week to test my findings, and she said that the wheels were "no good," so it definitely isn't just me. I am 6'2 myself and a big guy, I work from home and gained a few pounds from mostly staying in and the hell away from other people. However, the Doro C300 Pro V2 is rated for up to 150kg (330lbs), which in my case is used well within its max rating. Ergonomics The number of adjustments you can make, right up to setting it in nap mode — which I haven't fully tested yet — is what you'd expect from a premium chair. Yes, you can go up and down (max 7.5 cm adjustment), rock back and forth (with tilt adjustment), and lock the chair between three stages of 105°, 120°, 135°, which is not quite as flat as the AndaSeat I tested at 160°. Some thought has also gone into the "8D" armrests, too, which are cushioned but quite firm; you'll only know it if you press hard into the PU-covered tops, which give about half a centimeter, but it's enough to ensure your skin won't get awkwardly stuck to it in warmer (or sweatier) conditions. It almost feels like plastic and is very easy to keep clean. However, the armrest positions move far too easily, and I am not sure what that "elbow" function is. Maybe it is good for a short person with short arms, anyway, I never used it and kept it flat at all times. There are eight levels of adjustment for the armrests, they are: backwards, forwards, swing left/right, height up and down, tilt, and 360° rotation, which can be handy for desk clearance. As I said, the armrest pads shift far too easily, which could give off an ergonomic vibe, but who wants the armrest sliding when you are shifting weight? The height adjustability does lock into place when lifting and adjusting. Comfort This is ultimately what it boils down to at the end of the day, right? Quite a lot of reviews praise the comfort of this chair, and I don't disagree that the mesh seating is quite comfortable. I am used to the material from my daily Herman Miller. However, the backrest cannot be locked into place, and this is actually a feature; as you shift or recline yourself on the chair, the backrest moves with your body. It took some getting used to. The lumbar gives ample support, but I would have preferred an adjustable one built into the seat base, as this causes the backrest to move up and down at will. Again, as with my previous chair review, this chair is also rated for tall people, but nowhere in the product documentation does it say how tall. Being 6'2 myself, I'm happy to say that the backrest is tall and wide enough, and thought has been given to being able to adjust the neck rest, but as others have mentioned in their reviews, people as tall as 6.2ft is about the limit for the neckrest. Conclusion What I didn't like The footrest is rated for 15kg (33 lbs), which to me seems a bit light, and after looking online, it seems like a chair footrest for adults must be at least twice that rating. In all honesty, they are just hollow metal tubes, so it is not recommended to let a kid sit on them. I also feel like it doesn't really go out far enough for my height, so that kind of puts the dampener on me being able to use it regularly. I'll just have to continue to use my subwoofer as a footrest! I do not like the armrests being able to shift around as easily as they can, and they are a little too forward-positioned in the chair to comfortably sit close to my desk, because even in the lowest height position, they don't allow me to go under the desk like is possible with my Herman Miller. I also feel like this chair could have been delivered partially constructed, especially the armrests on the seat, and why the aluminum base wasn't already pre-constructed (without the castors) is baffling, considering it would have fit in one of the two boxes that way. The instructions also need to be clearer. On the pamphlet, there's an A to X listing (which is also used in the steps), but none of the physical parts use this lettering system! What I did like I'll be honest, I haven't used it for very long, just one week, and seating comfort is subjective after all! Any spills wiped straight off it, the stitching, and the lines look great, not a fray to be seen or stitch out of place. It looks kind of cool, too. My favorite feature of these seats is the nap mode. While you're not lying completely flat, it leans far back enough to make you easily doze off after a heavy gaming or working session. Overall, this chair offers plenty of comfort features. The MSRP does vary quite a bit depending on the region, at £549.99 in the UK, and €580 in Europe, and $599 before tax in the U.S. However, shipping is free, which is a bonus for such a heavy item. Is it worth it, though? At three years' warranty, I think it's a decent deal. Another firm out of Germany sent me a free replacement hydraulic gas spring for a chair that failed after almost four years, so it was well outside its two-year warranty. My advice is to always try, as you might have the same luck I did. If I could fault it at all, it would be the constant shifting of the armrests and backrest. Where to buy Although the footrest variant normally costs $539.99, it has been discounted to $469.99 on the official website in Black or White. In fact, the non-footrest variant is only $40 cheaper. On Amazon, it currently costs more at $499.99 links below. Sihoo Doro C300 Pro V2 for $469.99 (official website) Sihoo Doro C300 Pro V2 for $499.99 at Amazon US SIHOO provided a free sample without any review or pre-approval. Good to know This Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      73
    5. 5
      macoman
      62
  • Tell a friend

    Love Neowin? Tell a friend!