Recommended Posts

Hey all, as some of you know i brought a motherboard ram and cpu from chicane on this forum and all had been going well till i turned off the computer this morning as i left it on to download bf3.

Anyway when i got back from my college interview i turned on the computer and noticed that no picture appeared on the screen and the fans were going at full pelt (speed), turned it on and off a few time and same everytime. I then started to remove parts and build it back up, but again i still mostly had it with the fans spinning and no picture, the first time it did boot i let it start to load windows then about 30seconds into the load it just rebooted at first i thought it was because of updates and it started again then rebooted and then the fans were going full speed again....

an hour later

Rebuilt the machine a few times, played with the PSU wires incase that was the issue and only loaded as far as the bios (logged into the menu kept an eye on voltages and cpu temp) auto reboot and most times fail to reach post screen again. I then got my old components and put them onto a box and connected them up to check the PSU and had no issues so re-tried the parts i brought again and sometimes it would boot to post but most times it failed. I plan on (if i can catch my mate at home) taking the board, cpu and memory to a friends just to double cehck the PSU if he has a decent one but i can not think of anything else it could be or any other checks i could do. Couldnt be the Battery in the board could it? Gues si'll check that tomorrow....

Anyhow if it is the board can anyone recommend one, i know next to nothing about intel been an amd fan boy for many years only problem i have is all the other boards are mostly second hand and only have 2 ram slots when i need 4 to use all the ram.

Like i said worked fine for about 15hours then all of a sudden this seems odd anyway any help and wisdom is welcomed.

oh yes the parts:

Intel Q9550 CPU with retail cooler.

* Gigabyte EP43-DS3 Motherboard

* 8GB (4x2GB) Kingston HyperX 4GB (2x2GB) DDR2 8500C5 1066MHz Dual Channel RAM

Link to comment
https://www.neowin.net/forum/topic/1135504-motherboad-dead/
Share on other sites

It could be the battery since you shut it off. They are only about 3 dollars US.

I'll try that tomorrow then, i have one in the motherboard i have now and anothr in another motherboard i have that idea only popped into my head as i wrote the above cleared the cmos though by removing it just never thought about a swap

edit:

Infact i'll try it now with the motherboard at the side, already rebuilt the computer with the old parts brb.

No difference tried battery from motherboard i stopped using and one from the motherboard im currently using same thing though no booting to the post screen. Also found out the fan making the most noise was the gpu fan not the cpu one like i thought, also tried another gfx card i remembered i had which uses less power and no joy. I'll ask friends if they have a 775 cpu laying around see if they mind putting it in this motherboard guess thats the best way find out but tbh i dunno anyone that has one so could be a challenge lol

Edit

Off my mates tomorrow try out his PSU see if he can figure out the issue.

I will have to see what my mate says when i visit him his eye to detail is alot better than mine but everything looks good imo on the board, plus i'll see what he says about his cpu in the board as a check with his psu. Everything ive seen on the internet said mainboard or psu, though i have had suggestions that the cpu could be overheating but i dont see that from a cold boot tbh plus with core temp highest i saw was 57c after a bf3 play and in the bios when i left it on for testing it never went over 30c but rebooted then started to fail to post.

If its the board then i need to try and get another one as soon as i can this duel core is doing my nut in ever so slow just lately facebook freezes, jumping tabs which youtube is on means silence and pause of the video while it attempts to catch up and if it fails it normally means "Flash player has crashed" lol

Anyway thanks for the feedback soon as i know more i'll post.

Fingers crossed you get to the bottom of it. I feel bad but hand on heart that motherboard served me for about 3 years and was 100% reliable.. If I had any doubt about it I would never have sold it on.

Anyway - keep at it!

Fingers crossed you get to the bottom of it. I feel bad but hand on heart that motherboard served me for about 3 years and was 100% reliable.. If I had any doubt about it I would never have sold it on.

Anyway - keep at it!

Thanks Chicane and everyone else.

Turns out it was the psu, dont know why its working on my old gear but not this motherboard as it was a decent one too, sure its old now but its better than the one i borrowed i feel.

What i had: 600w enermax

What i borrowed: 425w Hipper

You would fo thought the more wattage would be better! haha guess not :/

Guess i'll find a replacement soon will have to do some research.

It might not be the load causing the problem, but could have just failed... it does happen.

I have an OCZ StealthXStream (I think) power supply which started doing something similar to yours. You could power the machine on and it'd work for about 30 seconds.. might start to boot Windows, or just get into Windows before turning off. Then would turn on again and keep doing the same thing. Even if you went into the BIOS, it'd still just reset.

Tested with a spare PSU from work and found it was indeed faulty.. worked fine with the new PSU. Luckily it turned out to be under a 3 year extended warranty with OCZ and it was about 2 years old so I was able to send it back and get a brand new one off them - no problems so far!

I was running that board, the quad core CPU, Palit GeForce GTX 560 OC, SSD, 1TB 7200RPM HDD, and PCI-e sound card (which needed a molex connection for additional power) off that 500W OCZ power supply for years so your 600W enermax should be more than up to it!

Anyway - glad you got to the bottom of it.. even if it does mean a bit more expense! :(

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time by Sayan Sen Recently we covered a really good deal on an AMD RX 9070 three-fan model that's available at slightly above its MSRP. If you are looking for a GPU for 1440p gaming that's around the performance of the Nvidia RTX 5070 you should most definitely check it out. Let's say that you are looking for a monitor to pair that up with too. The Samsung 49" G9 curved QD-OLED superultrawide is a good option that can provide an immersive experience. However despite being a very good deal currently (at $855), it may seem unaffordable to you, or you may simply not want to spend as much on a monitor. In that case Dell's S2725QS can be a very good option as it's on sale at the moment for its lowest price in over six months (purchase link under the specs table down below). The big highlight of the Dell S2725QS is its 27-inch IPS panel with a 3840 x 2160 (4K UHD) resolution, offering a high pixel density that can make text appear sharper while also providing plenty of screen space for productivity and media consumption. The display supports a refresh rate of up to 120Hz through both HDMI and DisplayPort, making it suitable not only for everyday desktop use but also for smoother gaming and scrolling. AMD FreeSync Premium support is included as well, helping reduce screen tearing during gaming sessions. The screen has fairly good brightness and color accuracy so you can use it for general work purpose, though photo/video editing is probably not going to be the best match for this. The technical specs of the Dell S2725QS are given in the table below: Specification Value Viewable Screen Size 27 in (68.58 cm) Screen Mode 4K UHD Maximum Resolution 3840 × 2160 Maximum Preset Resolution 3840 × 2160 @ 120 Hz Standard Refresh Rate 120 Hz Panel Technology In-plane Switching (IPS) Backlight Technology LED Edgelight System Pixel Density 163 PPI Response Time 8 ms GTG, 5 ms GTG, 4 ms GTG Horizontal Viewing Angle 178° Vertical Viewing Angle 178° Brightness 350 cd/m² (nits) Native Contrast Ratio 1500:1 Color Support 1.07 Billion Colors Color Gamut 99% sRGB (CIE 1931) Adaptive Sync AMD FreeSync Premium HDCP Support Yes Mount Type Panel Mount VESA Mount 100 × 100 mm Maximum Height Adjustment 13 cm Tilt -5° to 21° Swivel -30° to 30° Pivot ±90° Stand Adjustments Tilt, Swivel, Height, Pivot Glass Hardness 3H Horizontal Frequency 27–270 kHz (DisplayPort 1.4 / HDMI 2.1) Vertical Frequency 48–120 Hz (DisplayPort 1.4 / HDMI 2.1) Video Inputs 2 × HDMI 2.1 (HDCP 1.4 & 2.3), 1 × DisplayPort 1.4 (HDCP 1.4 & 2.3) Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C Operating Humidity 10%–80% (Non-condensing) Storage Humidity 5%–95% (Non-condensing) Get it at the link below: Dell S2725QS 27-inch 4K 120Hz IPS monitor: $218.49 (Sold and Shipped by Amazon US) (Was: $280) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases
    • Looks almost like what our office provides us, excluding the leg rest for obvious reasons 😴
    • Forget the iPhone. What about Android? Most Samsung Galaxy phones sold in the USA are manufactured in Vietnam. Asian countries have the infrastructure that the USA doesn't have. This is why most electronics are not made in the USA
    • The RAM would still probably be more expensive than what they were paying last year.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      231
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      82
    5. 5
      macoman
      64
  • Tell a friend

    Love Neowin? Tell a friend!