[HOW TO] Get back your Windows XP Bootloader


Recommended Posts

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1. Boot up with your Windows XP disc.

2. Select the option Recovery Console.

3. At the prompt, type "fdisk /mbr" (without the quotes of course)

4. Restart your computer.

Edited with correct info from the following posts...

For me and some others you might need to type "fdisk /mbr" instead of "fixmbr"

just thought I'd add that before people start saying it doesn't work

585566261[/snapback]

Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work. I know, I've tried several times. All they do is jack up the NTLoader.

Edited by Jstphish
is there a way to recover the winlogin.exe

585566297[/snapback]

Of course there is :) Boot into the recovery console and use this command.

expand d:\i386\winlogon.ex_ c:\windows\system32\winlogon.exe

D: = drive Xp cd is in

C: = drive Xp is installed on

Edited by Mr. Dick C. Normous
Jeez, leave it to me to have a typo in my very first HOW TO.  Mark, fix that would ya?

585566188[/snapback]

Not a problem. Done.

You should always be able to go back and edit your first post. All members are able to do this. At least that is how I understand it to work. :unsure:

And, by the way, thanks for the quick write-up! This gets asked an awful lot.

  • 3 weeks later...
Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work.  I know, I've tried several times.  All they do is jack up the NTLoader.

585566400[/snapback]

Agreed with that.

It always mess with the NTLoader.....arghhhhhh...gotta hate windows.

  • 5 weeks later...
fdisk /mbr does not work for me. I've even ran a search on my XP box for 'fdisk'...and it's not on here.

Is there a way that actually works? shall I try the 'fixmbr' command and see if that works - because I really don't wanna' mess up my system.

585823046[/snapback]

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP. Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP.  Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

585830160[/snapback]

If you have MS Windows 95/98/ME installed, click on Start >> Run. Type in "command", without the quotes, and press Enter. At the command prompt, type in the command "fdisk /mbr" to reinstall the Windows bootloader into the MBR.

If you have MS Windows 2000/XP installed, you will need to have the Windows Installation CD. Insert the Installation CD into your CD-ROM drive and reboot your computer. When Windows Setup loads up, follow the onscreen instructions to open the Recovery Console. At the Recovery Console command prompt, type in the command "fixmbr" to reinstall the Windows bootloader into the MBR.

Slight difference in the OS's.

Ok folks.

Fixmbr and fixboot are not working for me. It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable. Tried from the Windows XP CD. The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated. I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

Ok folks.

Fixmbr and fixboot are not working for me.  It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable.  Tried from the Windows XP CD.  The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated.  I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

585845486[/snapback]

I am not sure why your XP is refusing to boot. Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data. Then fdisk and remove all partitions and reinstall XP completely from scratch. You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

  • 3 months later...

The easiest way to fix this problem (I know, ive had to do it quite a few times) is to go on and start the installion, and format the drive. THEN go into the recovery console and in this order type fixmbr then fixboot and reinstall windows. I have not yet figured out how to keep windows on a seperate partition and have it still boot

I am not sure why your XP is refusing to boot.  Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data.  Then fdisk and remove all partitions and reinstall XP completely from scratch.  You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

585847112[/snapback]

dont need to start fdisk. just use the windows xp or 2000 cd and format there then reboot.

about people not getting this to work. not taking you all for stupid or anything like that, i would say check if the error says ntloader missing, if so you have to copy it from the xp cd. that is a whole other operation i dont have at hand rigth now. *there work houres are done, driving home*

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1.  Boot up with your Windows XP disc.

2.  Select the option Recovery Console.

3.  At the prompt, type "fixmbr" (without the quotes of course)

4.  Restart your computer.

585565400[/snapback]

Better hope u only have on partition, or you will trash them all (well, they will exist, but u won't be able to boot them)!!! You should warn people ahead of tyme....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      58
  • Tell a friend

    Love Neowin? Tell a friend!