[HOW TO] Get back your Windows XP Bootloader


Recommended Posts

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1. Boot up with your Windows XP disc.

2. Select the option Recovery Console.

3. At the prompt, type "fdisk /mbr" (without the quotes of course)

4. Restart your computer.

Edited with correct info from the following posts...

For me and some others you might need to type "fdisk /mbr" instead of "fixmbr"

just thought I'd add that before people start saying it doesn't work

585566261[/snapback]

Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work. I know, I've tried several times. All they do is jack up the NTLoader.

Edited by Jstphish
is there a way to recover the winlogin.exe

585566297[/snapback]

Of course there is :) Boot into the recovery console and use this command.

expand d:\i386\winlogon.ex_ c:\windows\system32\winlogon.exe

D: = drive Xp cd is in

C: = drive Xp is installed on

Edited by Mr. Dick C. Normous
Jeez, leave it to me to have a typo in my very first HOW TO.  Mark, fix that would ya?

585566188[/snapback]

Not a problem. Done.

You should always be able to go back and edit your first post. All members are able to do this. At least that is how I understand it to work. :unsure:

And, by the way, thanks for the quick write-up! This gets asked an awful lot.

  • 3 weeks later...
Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work.  I know, I've tried several times.  All they do is jack up the NTLoader.

585566400[/snapback]

Agreed with that.

It always mess with the NTLoader.....arghhhhhh...gotta hate windows.

  • 5 weeks later...
fdisk /mbr does not work for me. I've even ran a search on my XP box for 'fdisk'...and it's not on here.

Is there a way that actually works? shall I try the 'fixmbr' command and see if that works - because I really don't wanna' mess up my system.

585823046[/snapback]

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP. Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP.  Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

585830160[/snapback]

If you have MS Windows 95/98/ME installed, click on Start >> Run. Type in "command", without the quotes, and press Enter. At the command prompt, type in the command "fdisk /mbr" to reinstall the Windows bootloader into the MBR.

If you have MS Windows 2000/XP installed, you will need to have the Windows Installation CD. Insert the Installation CD into your CD-ROM drive and reboot your computer. When Windows Setup loads up, follow the onscreen instructions to open the Recovery Console. At the Recovery Console command prompt, type in the command "fixmbr" to reinstall the Windows bootloader into the MBR.

Slight difference in the OS's.

Ok folks.

Fixmbr and fixboot are not working for me. It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable. Tried from the Windows XP CD. The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated. I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

Ok folks.

Fixmbr and fixboot are not working for me.  It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable.  Tried from the Windows XP CD.  The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated.  I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

585845486[/snapback]

I am not sure why your XP is refusing to boot. Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data. Then fdisk and remove all partitions and reinstall XP completely from scratch. You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

  • 3 months later...

The easiest way to fix this problem (I know, ive had to do it quite a few times) is to go on and start the installion, and format the drive. THEN go into the recovery console and in this order type fixmbr then fixboot and reinstall windows. I have not yet figured out how to keep windows on a seperate partition and have it still boot

I am not sure why your XP is refusing to boot.  Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data.  Then fdisk and remove all partitions and reinstall XP completely from scratch.  You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

585847112[/snapback]

dont need to start fdisk. just use the windows xp or 2000 cd and format there then reboot.

about people not getting this to work. not taking you all for stupid or anything like that, i would say check if the error says ntloader missing, if so you have to copy it from the xp cd. that is a whole other operation i dont have at hand rigth now. *there work houres are done, driving home*

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1.  Boot up with your Windows XP disc.

2.  Select the option Recovery Console.

3.  At the prompt, type "fixmbr" (without the quotes of course)

4.  Restart your computer.

585565400[/snapback]

Better hope u only have on partition, or you will trash them all (well, they will exist, but u won't be able to boot them)!!! You should warn people ahead of tyme....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sorry I mean your back rest on your Herman, can you move the back say 2cm then lock it? Then realise 2cm isn’t enough and you want an extra 1cm then lock it into that position? Basically like in an older car seat, you turn the knob round until you get the back recline precisely where you want it, this is what I found the Herman wouldn’t do
    • WTF? I am not taking a video of myself to access a site or to create an account. What are they thinking? I don’t even have a webcam on my main desktop PC. The powers to be are really looking to normalize the taking of pics or submitting ID for everything. I afraid most people will end up just going along with it.
    • Free eBook: A Comprehensive Guide to the NIST Cybersecurity Framework 2.0 (worth $126.95) by Steven Parker Claim your complimentary copy (worth $126.95) of "A Comprehensive Guide to the NIST Cybersecurity Framework 2.0" for free, before the offer ends on July 8. (link below) Description The National Institute of Standards and Technology (NIST) Cybersecurity Framework, produced in response to a 2014 US Presidential directive, has proven essential in standardizing approaches to cybersecurity risk and producing an efficient, adaptable toolkit for meeting cyber threats. As these threats have multiplied and escalated in recent years, this framework has evolved to meet new needs and reflect new best practices, and now has an international footprint. There has never been a greater need for cybersecurity professionals to understand this framework, its applications, and its potential. A Comprehensive Guide to the NIST Cybersecurity Framework 2.0 offers a vital introduction to this NIST framework and its implementation. Highlighting significant updates from the first version of the NIST framework, it works through each of the framework’s functions in turn, in language both beginners and experienced professionals can grasp. Replete with compliance and implementation strategies, it proves indispensable for the next generation of cybersecurity professionals. A Comprehensive Guide to the NIST Cybersecurity Framework 2.0 readers will also find: Clear, jargon-free language for both beginning and advanced readers Detailed discussion of all NIST framework components, including Govern, Identify, Protect, Detect, Respond, and Recover Hundreds of actionable recommendations for immediate implementation by cybersecurity professionals at all levels A Comprehensive Guide to the NIST Cybersecurity Framework 2.0 is ideal for cybersecurity professionals, business leaders and executives, IT consultants and advisors, and students and academics focused on the study of cybersecurity, information technology, or related fields. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. A Comprehensive Guide to the NIST Cybersecurity Framework 2.0 Was $126.95, but is now FREE | Above link offer expires on July 8. The below offers are also available for free in exchange for your (work) email: View our recent time-limited free eBook offers The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) now FREE How to Build an AI Design Workflow with Gamma ($21 Value) now FREE The Ultimate Linux Newbie Guide – Featured free content Python Notes for Professionals – Featured free content Learn Linux in 5 Days – Featured free content Quick Reference Guide for Cybersecurity – Featured free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • I'm not unblocking my camera for this crapola. Sorry, Google.
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      264
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      96
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!