Linksys WRT54G vs D-Link DI-624


Recommended Posts

I own both of those, (The D-Link was from Verizon) I have to say the WRT54G Is by far the best. Their Configuration web system is much more organized, flows better, and well... looks better. Also the signal is great. much further than the D-Link.... If you happen to come across a WRT54G that has the linux firmware, you can do a lot of cool things with it.

Linksys WRT54G is better. I have the Linksys WRT54GS with the HyperWRT firmware.

Tom's Networking Review - WRT54G

DI-624 This is something that I have experienced before while providing services to a company. The connection was dropping constantly.

Pros

* 108 Mbps performance

* WPA security and WEP encryption support

* Content filtering policies - MAC, IP, URL and domain name

Cons

* Some owners report dropped connections and frequent resets

* Some owners have reported quality of service issues with D-Link tech support

/EZ

Edited by EZRecovery

Why not consider the DGL-4300 ???

Totally different interface than other D-link set ups. I just cant say enough good things about this router.

Someone seems to have the same router as I do. It's very stable, I get the best range from this than most other consumer wireless routers. And I have yet to get any disconnects/drops. Full signal anywhere in my house, and outside for a pretty good distance.

...

If you happen to come across a WRT54G that has the linux firmware, you can do a lot of cool things with it.

I beleive those are designated with an "L" at the end, as such: WRT54GL

thnx guys for all ur replies u have convince me about the linksys router. Now I'm looking into getting this one linksys WRT54GS with this Wireless-G Notebook Adapter WPC54G, is that any good? will i have any compatibility probles?

I only have a budget of $160 Can for both, reason I'm trying to stay at that price range.

again thnx for all ur help/replies.

X@vier

thnx guys for all ur replies u have convince me about the linksys router. Now I'm looking into getting this one linksys WRT54GS with this Wireless-G Notebook Adapter WPC54G, is that any good? will i have any compatibility probles?

I only have a budget of $160 Can for both, reason I'm trying to stay at that price range.

again thnx for all ur help/replies.

X@vier

If you are getting the WRT54GS router, get yourself the WPC54GS card, not the WPC54G.

If you are in budget, just get the WRT54G and the WPC54G. Getting into the SpeedBooster might add about $40 extra.

/EZ

If you are getting the WRT54GS router, get yourself the WPC54GS card, not the WPC54G.

If you are in budget, just get the WRT54G and the WPC54G. Getting into the SpeedBooster might add about $40 extra.

/EZ

thnx, i just found the WRT54GS, i didn't see it before.....yes i am in a budget but i just calculated the prices and i can still do it.....so i guess is the WRT54GS router and the WRT54GS Adapter.

thnx for all ur help guys,

X@vier

All you need to know about linksys is available here : http://www.linksysinfo.org/

Please be reminded that the WRT54GS VER 5 is not working with 3rd party firmware. Most of the newest (in the market) router is v5 already.

I would suggest you to get a WRT54G (without the S) since you will mostly not use the "Speedbooster" function anyway unless you buy all adapters adopting "Speedbooster" from linksys. Or, you can just buy the older version of WRT54G or WRT54GS over ebay. Again....be aware of the hardware version. There are differences between each hardware version. Head over to http://www.linksysinfo.org/modules.php?nam...=showpage&pid=6 and you can deal with a lot of information on the differences.

Anyway, I quote from Linksysinfo.org by TOXIC:

NO 3rd Party Firmware exists for this model. the problem is the amount of RAM and the OS is VxWorks and not Linux.

if you want to use 3rd Party Firmwares, DO NOT BUY A WRT54G v5

To find out which WRT54G you are buying look at the Serial number on the box or the Unit itself.

There are serveral versions of the WRT54G, different powersupplies, chipsets, features, though all based on similar firmware.

To find out which model you have please go by the Serial Number of your WRT54G.

This is the only true way of finding out what one you have.

Known serial numbers (first 4 characters) vs versions / Chipsets:

CDF0 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF1 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF2 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF3 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF5 = WRT54G v2.0 / ADM6996L Chipset / 200Mhz CPU

CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset / 200Mhz CPU

CDF8 = WRT54G v3.0 / BCM5325EKQM Chipset / 200Mhz CPU

CDF9 = WRT53G v3.1 / BCM5325EKQM Chipset / 200Mhz CPU

CDFA = WRT54G v4.0 / BCM5352E Chipset / 200Mhz CPU

CDFB = WRT54G v5.0 / BCM5352EKPB Chipset < the one to stay away from.

recommendations:

WRT54G v2.0-v4.0

WRT54GS v1.0-v4.0

All you need to know about linksys is available here : http://www.linksysinfo.org/

Please be reminded that the WRT54GS VER 5 is not working with 3rd party firmware. Most of the newest (in the market) router is v5 already.

I would suggest you to get a WRT54G (without the S) since you will mostly not use the "Speedbooster" function anyway unless you buy all adapters adopting "Speedbooster" from linksys. Or, you can just buy the older version of WRT54G or WRT54GS over ebay. Again....be aware of the hardware version. There are differences between each hardware version. Head over to http://www.linksysinfo.org/modules.php?nam...=showpage&pid=6 and you can deal with a lot of information on the differences.

Anyway, I quote from Linksysinfo.org by TOXIC:

NO 3rd Party Firmware exists for this model. the problem is the amount of RAM and the OS is VxWorks and not Linux.

if you want to use 3rd Party Firmwares, DO NOT BUY A WRT54G v5

To find out which WRT54G you are buying look at the Serial number on the box or the Unit itself.

There are serveral versions of the WRT54G, different powersupplies, chipsets, features, though all based on similar firmware.

To find out which model you have please go by the Serial Number of your WRT54G.

This is the only true way of finding out what one you have.

Known serial numbers (first 4 characters) vs versions / Chipsets:

CDF0 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF1 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF2 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF3 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF5 = WRT54G v2.0 / ADM6996L Chipset / 200Mhz CPU

CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset / 200Mhz CPU

CDF8 = WRT54G v3.0 / BCM5325EKQM Chipset / 200Mhz CPU

CDF9 = WRT53G v3.1 / BCM5325EKQM Chipset / 200Mhz CPU

CDFA = WRT54G v4.0 / BCM5352E Chipset / 200Mhz CPU

CDFB = WRT54G v5.0 / BCM5352EKPB Chipset < the one to stay away from.

recommendations:

WRT54G v2.0-v4.0

WRT54GS v1.0-v4.0

wow thats a lot of useful info, thnx mipra that was a lot of help.

so i guess i have to look for the WRT54GS v1.0 - v4.0 and yes i will be getting the adapter with the SpeedBooster.

X@vier

EZRecovery......you have a picture of a dude with no shirt on......care to tell us anything ?

:D

haha thats funny because i was thinking the same thing :pinch:

anyways, where am I going to find a WRT54GS v1.0-v4.0? when all the new ones are v5.0 :blink:

X@vier

You will have to inspect each box at the store for the right serial numbers. I tried every where and all i

could find were V-5s. I ended up buying a WRT54GL and flashing it with HYPERWRT, wich will get you

speedbooster. NCIX has them in stock.

WRT54GS

CGN0 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN1 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN2 = WRT54GS v1.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN3 = WRT54GS v2.0 / BCM5325EKQM Chipset / CPU 200Mhz

CGN4 = WRT54GS v2.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN5 = WRT54GS v3.0 / BCM5352E Chipset / CPU 200Mhz

CGN6 = WRT54GS v4.0 / BCM5352E Chipset / CPU 200Mhz

CGN7 = WRT54GS v5.0 / the one to stay away from

WRT54GL

CL7A = WRT54GL / BCM5352E Chipset / CPU 200Mhz

Good luck hunting them down.

Another vote for LinkSys. I was disappointed this month when I bought a D-Link 524 Wireless router, I was moving to wireless due too much wires around my room and I got a new desk so I had to do this. Basically my friend gave me his LinkSys BEFW11S4 which is a 802.11B standard wireless device but the card I have is a G card.

The D-Link was giving me a maxium of "Very Low" in signal strength according to windows and my network card software, but then I hooked up this router my friend gave me (old) from LinkSys and god damn I tell you the signal is now at "Excellent" which is the highest level of strength. Funny thing I put both routers in my room to see if its something in the walls that was making it low but still I was getting "Very Low" I was very disappointed and returned the router the day after and stuck with this for now until I can afford a new Linksys G router.

You will have to inspect each box at the store for the right serial numbers. I tried every where and all i

could find were V-5s. I ended up buying a WRT54GL and flashing it with HYPERWRT, wich will get you

speedbooster. NCIX has them in stock.

WRT54GS

CGN0 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN1 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN2 = WRT54GS v1.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN3 = WRT54GS v2.0 / BCM5325EKQM Chipset / CPU 200Mhz

CGN4 = WRT54GS v2.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN5 = WRT54GS v3.0 / BCM5352E Chipset / CPU 200Mhz

CGN6 = WRT54GS v4.0 / BCM5352E Chipset / CPU 200Mhz

CGN7 = WRT54GS v5.0 / the one to stay away from

WRT54GL

CL7A = WRT54GL / BCM5352E Chipset / CPU 200Mhz

Good luck hunting them down.

thnx for all ur help guys, I just got the Linksys Wireless G Broadband Router with SpeedBoost and the Notebook Adapter with SpeedBoost.

didn't take me long to find the one with the CGN6 S/N :) but the sales person was looking at me funny :rofl:

now can some1 tell me more about this firmware updates or hook me up with a link.

thnx again,

X@vier

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!