Enable AHCI on Intel chipsets


Recommended Posts

Some of you might know that AHCI enables Native Command Queuing support and Hot Plugging for SATA drives. Unfortunately it can usually be enabled only when installing Windows, by using a floppy drive.

Spported southbridges: ICH6R, ICH6M, ICH7R, ICH7DH, ICH7M

Instructions:

1) Make sure AHCI is not enabled in your BIOS, otherwise this guide is pointless for you.

2) Back up your Windows folder and prepare a boot disk in case this guide fails!

3) Download 79im05ww.exe from http://www-307.ibm.com/pc/support/site.wss...ocid=MIGR-62909

4) Extract the file to C:\DRIVERS\WIN\SATA.

5) If you have the ICH7M southbridge, go to step 8.

5) Open C:\DRIVERS\WIN\SATA\PREPARE\IMSM_PRE.inf in Notepad.

6) Replace any instance of DEV_27C5 with the following, according to your southbridge:

ICH6R - DEV_2652

ICH6M - DEV_2653

ICH7R - DEV_27C1

ICH7DH - DEV_27C1

ICH7M - DEV_27C5

7) Save the file and close Notepad.

8) Click Start, select Run.

9) In the Open field type C:\DRIVERS\WIN\SATA\PREPARE\INSTALL.CMD and click OK.

10) Restart your computer, and enable AHCI on in your BIOS Setup.

11) Start Windows XP or Windows 2000. The Found New Hardware wizard will start automatically.

12) If running Windows XP:

1. Click No, not this time then click Next.

2. Select Install from a list or specific location (Advanced), then click Next.

3. Select Search for the best driver in these locations.

4. Select Include this location in the search: and specify the path, C:\DRIVERS\WIN\SATA, and click Next.

13) If running Windows 2000:

1. Click Next.

2. Select Search for a suitable driver for my device (recommended), then click Next.

3. Select Specify a location, then click Next.

4. Specify the path, C:\DRIVERS\WIN\SATA, and click OK, then click Next.

14) Click Finish.

15) When the System Settings Change window appears, click Yes. The computer restarts.

Link to comment
https://www.neowin.net/forum/topic/457699-enable-ahci-on-intel-chipsets/
Share on other sites

Confused here. I'm running a single SATA 250GB drive as my primary boot disk. (Well, I've partitioned it into two, but it's one physical drive.) Intel ICH7R southbridge.

No RAID for me, as I've only got one drive, but what advantages will I get if I run my drive in AHCI mode rather than in IDE mode? Can this even be done - this IS the drive I'm booting from...

Confused here. I'm running a single SATA 250GB drive as my primary boot disk. (Well, I've partitioned it into two, but it's one physical drive.) Intel ICH7R southbridge.

No RAID for me, as I've only got one drive, but what advantages will I get if I run my drive in AHCI mode rather than in IDE mode? Can this even be done - this IS the drive I'm booting from...

As I said in the first post:

AHCI enables Native Command Queuing support and Hot Plugging for SATA drives

:no: I am not able to set the BIOS in AHCI mode

I use a Asus P5PL2 mobo with Intel ICH7DH southbridge

I can see in BIOS that the SATA controller use IDE mode for my Seagate Barracuda disk

It is a sata2 disk,and my mobo support sata2 up to 300Mb/s,so I would realy like the sata

controllers to work in AHCI mode.

When I enter BIOS,under IDE configuration,there is a line called:Configur SATA As..,but the only option

is: Standard IDE.As a discription to this option it says:"When in AHCI/RAID mode,controller is forced to

Native mode".

Can anybody please tell me how to configur my SATA drive for best preformence?

Is there a way to configur it to AHCI mode?

I hope somebody has time to help me!

  • 2 months later...
lhost' date='May 3 2006, 09:26' post='587471595']

Some of you might know that AHCI enables Native Command Queuing support and Hot Plugging for SATA drives. Unfortunately it can usually be enabled only when installing Windows, by using a floppy drive.

Can't you enable AHCI by just installing Intel's Matrix Storage Manager/Technology?:

http://www.intel.com/support/chipsets/imsm/

http://www.intel.com/support/chipsets/imst/

  • 1 month later...
  • 1 month later...
  • 2 weeks later...

I literally spent a DAY trying to get AHCI to work. I was trying to load WMCE and after pressing F6, loading the drivers, and watching Windows install....my PC would crash and reboot at the Loading Windows screen (the one you see right after post with the animated bar).

I tried everything I could think of (believe me....that is a lot of stuff....I'm 39 and been building PC's since I was 12)

THIS WORKED LIKE A CHAMP!!!!!!!!!!!!!

THANK YOU, THANK YOU, AND THANKS A HECK OF A LOT!!!!!!

:D :) :laugh: :rofl: :woot: :yes:

One note for anyone attempting this procedure. In step 6 the instructions say REPLACE. Notepad has a REPLACE feature. USE IT! It will keep you from making a typo like another poster did.

  • 4 weeks later...
  • 1 month later...
  • 1 month later...

hi to all! i'm Ruben from italy. I have a p5b deluxe and two 250gb sata2. I would like to know where to connect those hd. I know that there are difference between red and black connector. I would like to know also how to set sata on bios and which driver install. i have read of ahci but i don't understand very well what is it. thank you for your help and sorry for my bad english

  • 1 month later...

Here is the solution (it worked fine for me)

With the BIOS on IDE open Regedit and go to:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0'

Raboot

Reboot again, enter BIOS

Change IDE to AHCI, Save

Let the OS redetect your drives

Reboot

That's it, hope it helps

  • 3 months later...
  • 2 weeks later...
Any news regarding this guide but with the ICH9 chipset?

I have the P35 chipset w/ ICH9 (Gigabyte P35-DS3R)... with an existing Vista installation I did this:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0' (default value was 4)

like Ropera mentioned, I installed the Intel Matrix Program/Drivers, rebooted went into Bios... changed from RAID/IDE to AHCI save and everything went fine...

  • 2 months later...

I used that method originally on my Asus P5W DH Deluxe for both Windows XP 32 bits and Vista 32 bits but now I have a double problem:

Now I have a Asus P5K Deluxe with ICH9 and I'm with both Windows XP and Vista x64 edition.

So instead of this drivers version on the firts post (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62909), I'll have to get another one right?

I have the P35 chipset w/ ICH9 (Gigabyte P35-DS3R)... with an existing Vista installation I did this:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0' (default value was 4)

like Ropera mentioned, I installed the Intel Matrix Program/Drivers, rebooted went into Bios... changed from RAID/IDE to AHCI save and everything went fine...

Can you post a print screen of all DWORD keys you have under \Start forlder? Inside mine HKLM\System\CurrentControlSet\Services\ it doesn't even have a \msahci or \msahci\Start forlders, I'm confused :wacko:

Please help me, I'm desperate.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!