How to set up XChat (Windows) to connect to Neowin I.R.C


Recommended Posts

How to set up XChat (Windows) to connect to Neowin I.R.C

Should also cover XChat for linux/mac

01. Go to the Neowin I.R.C: User Control Panel and set up your username by entering it in the box and then clicking "Update IRC Nickname"

neowinircimage01lq5.th.png

02. Read the Network Rules

03. Download and install XChat

04. Open up the XChat client

A.On the first load the Network List will load, you may delete the channels that you dont want off this list if you want.

05.Click the ADD button next to the Network List

06.Give the Network a name in the text box that appeard in the Networks area (EG: Neowin), Then select the network and click edit.

neowinircimage03dq4.th.png

07.In the top where says "newserver/6667" click that and edit it to say "irc.neowin.net/6667" untick the box that says

neowinircimage04wg3.th.png

08.Now unclick the checkbox next to "Use global user information" and in the boxes that appear insert the following details:

  • Nickname: <The nickname you selected in the user control pannel> (EG: ExampleUser)
  • Second choice: the same as above but with a | at the end (EG: ExampleUser|)
  • Username: just type in Neowin
  • Realname: just type in neowin again

neowinircimage05oo6.th.png

09.If you would like it to automatically connect to the Neowin network when you start XChat tick the "Auto connect to this network at startup box" checkbox

neowinircimage06hq9.th.png

10. Now click into the "Channels to Join:" box and type in #neowin

neowinircimage07iq0.th.png

11. Now also click into the "Server Password:" box and type in your neowin login password.

neowinircimage08rb2.th.png

12. Now click the close button.

13. To connect select the Network you just created (aka Neowin) and click the connect button.

Legal Crap:

All trademarks mentioned in this post are the property of their respective owners. Screens remain property of me. Client used was XChat Windows build by silverex using the default theme.

I also have a question.. If I am on a network (like work) do you know how I can still connect to irc? Like I take it 6667 is the port you are using to connect.

Is there another port I can use that isn't normally blocked by a network? Or is there some site I can go to in order to check and see what ports are open on my network?

You should post the link in step three.

[ http://www.xchat.org/download/ ]

That is the official built but the windows version is shareware because the author says it's a difficult process.

The version shown here is the X-Chat built by Silverex which is free but comes with GTK for the interface which is the only negative thing about it compared to the official built but it's still smooth and quick.

no needs, it's automatic.
Yeah, you auto-join rooms based on your user info, no client configuration needed ;)

And good guide (Y)

Um that autojoin will not work with all clients (i know it dosn't work on talkative or xchat / and i'm preety sure it dosn't work in hydra either)

You should post the link in step three.

[ http://www.xchat.org/download/ ]

But not everyone uses that build so it is kinda useless. and everybody should be able to find it without much help anyway.

  • 3 weeks later...

I'm guessing that the IRC server will invite you to the channels and your IRC client will connect to the channels automatically if invited. This is actually a bit of a security risk but I guess the Neowin server is trustable. There's a script to get XChat to auto join on invite here: http://forum.xchat.org/viewtopic.php?p=139...606935c9e14d705

irssi can be configured to auto join on invite too.

I'm guessing that the IRC server will invite you to the channels and your IRC client will connect to the channels automatically if invited. This is actually a bit of a security risk but I guess the Neowin server is trustable. There's a script to get XChat to auto join on invite here: http://forum.xchat.org/viewtopic.php?p=139...606935c9e14d705

irssi can be configured to auto join on invite too.

No, it dosn't use invites. It uses the SAJOIN command which only certain people (chatmods and above) can access.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • With the current hardware prices Microsoft should lift the restriction. Then if you have the correct TPM then allow you to use X feature, if you don't have the correct TPM then don't but still actually let you run windows. 11. With a disclaimer during install that X features would be unavailable.
    • It's good for recycling of course. But commence inflation of a second hand RAM bubble and price gouging on DDR 4 inventory in 3... 2... 1...
    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      538
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!